(a) General. DOE incorporates by reference the following test procedures into subpart F of part 431. The materials listed have been approved for incorporation by reference by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Any subsequent amendment to the listed materials by the standard-setting organization will not affect the DOE regulations unless and until such regulations are amended by DOE. Materials are incorporated as they exist on the date of the approval, and a notice of any changes in the materials will be published in the Federal Register. All approved materials are available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal--register/code--of--federal--regulations/ibr--locations.html. Also, this material is available for inspection at U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, 6th Floor, 950 L'Enfant Plaza SW., Washington, DC 20024, (202) 586-2945, or go to: http://www1.eere.energy.gov/buildings/appliance--standards/. The referenced test procedure standards are listed below by relevant standard-setting organization, along with information on how to obtain copies from those sources.
(b) AHRI. Air-Conditioning, Heating, and Refrigeration Institute, 2111 Wilson Blvd., Suite 500, Arlington, VA 22201, (703) 524-8800, or go to: http://www.ahrinet.org.
(1) ARI Standard 210/240-2003, ``2003 Standard for Unitary Air-Conditioning & Air-Source Heat Pump Equipment,'' published in 2003 (AHRI 210/240-2003), IBR approved for Sec. 431.96.
(2) ANSI/AHRI Standard 210/240-2008, ``2008 Standard for Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment,'' approved by ANSI on October 27, 2011 and updated by addendum 1 in June 2011 and addendum 2 in March 2012 (AHRI 210/240-2008), IBR approved for Sec. 431.96.
(3) ARI Standard 310/380-2004, ``Standard for Packaged Terminal Air-Conditioners and Heat Pumps,'' published September 2004 (AHRI 310/380-2004), IBR approved for Sec. 431.96.
(4) ARI Standard 340/360-2004, ``2004 Standard for Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment,'' published in 2004 (AHRI 340/360-2004), IBR approved for Sec. 431.96.
(5) ANSI/AHRI Standard 340/360-2007, ``2007 Standard for Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment,'' approved by ANSI on October 27, 2011 and updated by addendum 1 in December 2010 and addendum 2 in June 2011 (AHRI 340/360-2007), IBR approved for Sec. 431.96.
(6) ANSI/AHRI Standard 390-2003, ``2003 Standard for Performance Rating of Single Package Vertical Air-Conditioners and Heat Pumps,'' dated 2003, (AHRI 390-2003), IBR approved for Sec. 431.96.
(7) ANSI/AHRI Standard 1230-2010, ``2010 Standard for Performance Rating of Variable Refrigerant Flow (VRF) Multi-Split Air-Conditioning and Heat Pump Equipment,'' approved August 2, 2010 and updated by addendum 1 in March 2011 (AHRI 1230-2010), IBR approved for Sec. 431.96.
(8) [Reserved]
(c) ASHRAE. American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1791 Tullie Circle, NE., Atlanta, Georgia 30329, (404) 636-8400, or go to: http://www.ashrae.org.
(1) ASHRAE Standard 127-2007, ``Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners,'' approved on June 28, 2007, (ASHRAE 127-2007), IBR approved for Sec. 431.96.
(2) [Reserved]
(d) ISO. International Organization for Standardization, 1, ch. De la Voie-Creuse, Case Postale 56, CH-1211 Geneva 20, Switzerland, +41 22 749 01 11 or go to: http://www.iso.ch/.
(1) ISO Standard 13256-1, ``Water-source heat pumps--Testing and rating for performance--Part 1: Water-to-air and brine-to-air heat pumps,'' approved 1998, IBR approved for Sec. 431.96.
(2) [Reserved] [77 FR 28989, May 16, 2012]