You should use the following address when submitting to BIS applications, reports, documentation, or other requests required in this part 752, via courier: Bureau of Industry and Security, U.S. Department of Commerce, 14th and Pennsylvania Ave., NW., Room 2099B, Washington, DC 20230, ``Attn: Special Licensing and Compliance Division''. You may also reach the Special Licensing and Compliance Division by phone at (202) 482-0062 or by fax at (202) 501-6750. [73 FR 37, Jan. 2, 2008, as amended at 78 FR 13470, Feb. 28, 2013] Sec. Supplement No. 1 to Part 752--Instructions for Completing Form BIS-
748P, Multipurpose Application for Requests for Special Comprehensive
Licenses
All information must be legibly typed within the lines for each Block or box, except where a signature is required. Where there is a choice of entering a telephone or telefacsimile number, and you chose a telefacsimile number, identify the number with the letter ``F'' immediately following the number.
Complete Blocks 1, 2, 3 and 4 according to the instructions in Supplement No. 1 to part 748 of the EAR.
Block 5: Type of Application. Enter an ``x'' in the Special Comprehensive License box.
Block 6: Documents Submitted with Application. Enter an ``x'' in the appropriate boxes to indicate which forms are attached.
Block 7: Documents on File with Applicant. Leave blank.
Block 8: Special Comprehensive License. Complete by entering an ``x'' in the appropriate boxes to indicate which forms are attached.
Block 9: Special Purpose. This block should only be completed when requesting changes to an approved SCL.
Block 10: Resubmission Application Control Number. Leave blank.
Block 11: Replacement License Number. This Block should be completed by previous special license holders. If you have had a special license in the past, enter that license number (i.e., V , SS , DL , or SF ). A new SCL number will be assigned upon approval of your SCL application.
Block 12: Items Previously Exported. Leave blank.
Block 13: Import/End-User Certificate. Leave blank.
Block 14: Applicant. Complete according to the instructions in Supplement No. 1 to part 748 of the EAR.
Block 15: Other Party Authorized to Receive License. Complete, if applicable, according to the instructions in Supplement No. 1 to part 748 of the EAR.
Block 16: Purchaser. Leave blank.
Block 17: Intermediate Consignee. Leave blank.
Block 18: Ultimate Consignee. Leave blank.
Block 19: End-User. Leave blank.
Block 20: Original Ultimate Consignee. Leave blank.
Block 21: Specific End-Use. Leave blank.
Block 22: For one item, complete sub-blocks (a) through (j). For multiple items, complete Form BIS 748P-A.
Block 23: Total Application Dollar Value. Enter the projected total dollar value of all transactions you anticipate making throughout the entire validity period of the SCL.
Block 24: Additional Information. Enter additional data pertinent to the transaction.
Block 25: Signature. Complete according to the instructions in Supplement No. 1 to part 748 of the EAR. [62 FR 25466, May 9, 1997] Sec. Supplement No. 2 to Part 752--Instructions for Completing Form BIS-
748P-A, ``Item Annex''
All information must be legibly typed within the lines for each block or box.
Block 1: Application Control No. Enter the application control number found on Form BIS-748P.
Block 2: Subtotal. Leave blank.
Block 21: Continuation of Specific End-Use Information. Complete as necessary to fully describe the transaction(s).
Block 22:
(a) ECCN. Enter the Export Control Classification Number that corresponds to the item you wish to export or reexport under the SCL.
(b) CTP. You must enter the ``Adjusted Peak Performance'' (``APP'') in this block if you intend to export or reexport a computer or equipment that contains a computer. Instructions on calculating the APP are contained in a Technical Note at the end of Category 4 in the CCL.
(c)-(i): Leave blank.
(i): Leave blank.
(j) Manufacturer's Description. Enter a detailed description of the item proposed for export or reexport. Brochures or product literature may be supplied at the option of the applicant. However, such information may expedite review and processing of your application.
Block 24: Continuation of Additional Information. Enter any identifying information that defines the scope of items you are requesting to export or reexport under the SCL. For example, ``4A004 except items controlled for MT reasons''. [61 FR 12835, Mar. 25, 1996, as amended at 62 FR 25466, May 9, 1997; 71 FR 20887, Apr. 24, 2006]
Sec. Supplement No. 3 to Part 752--Instructions on Completing Form BIS-
752 ``Statement by Consignee In Support of Special Comprehensive
License''
All information must be legibly typed within the lines for each Block or Box, except where a signature is required.
Block 1: Application Control No. Enter the ``Control No.'' that is pre-printed on Form BIS-748P, Multipurpose Application. You may obtain this information from the applicant.
Block 2: Consignee ID Number. Leave blank.
Block 3: Type of Request. For new applications, leave blank.
Block 4: Consignee Information. Enter the complete address where the consignee is located. A Post Office (P.O.) Box alone is NOT acceptable, but may be included in this Block 4 for mailing purposes, along with a complete address. If records required by Sec. 752.12 of this part and part 762 of the EAR are maintained/stored at a separate address, indicate the address in Block 9. In the absence of a complete address, Form BIS-752 will be returned without action.
Block 5: Exporter Information. Enter the complete address of the exporter. Leave the SCL Case No. box blank for new applications and enter the SCL Case No. for ``change'' actions.
Block 6: Description of Items. Provide a summary description of the items proposed for import and reexport under the SCL. Firms that will not receive the entire range of items under a particular ECCN identified on Form BIS-748P-A should describe only the items they will receive under the SCL. In some instances, consignee approval will be contingent on the nature of the item requested.
Block 7: Consignee's Business and Relationships.
(i) Item (a): Identify the nature of your company's principal business as it affects the disposition of items to be imported and reexported under this license by including the appropriate letter choice(s) from the following: (a) manufacturer, (b) distributor, (c) assembler, (d) sales agent, (e) warehouse, (f) service facility, or (g) other. For other, provide an explanation in Block 9.
(ii) Item (b): Indicate the relationship between your company and the applicant's company by providing the appropriate letter choice(s) from the following: (a) wholly-owned subsidiary, (b) independent company, (c) joint venture company, (d) controlled-in-fact affiliate, (e) contractor/subcontractor, or (f) other. For other, provide an explanation in Block 9.
(iii) Item (c): Enter the number of years of relationship between your company and the applicant company.
(iv) Item (d): Enter the estimated dollar volume of sales or other transactions with the SCL holder during the last twelve month period before submission of the application for an SCL.
(v) Item (e): Enter an estimated dollar volume proposed under this application for the validity period of the SCL.
Block 8: Disposition or Use of Items.
(i) Item (a): Complete this Block if your company is requesting involvement in end-user activities that involves importing items for the company's own use (e.g., as capital equipment).
(ii) Item (b): Complete this Block if your company is requesting involvement in end-user activities that incorporates items received under the SCL into a new end-product that results in a change of identity of the U.S.-item (e.g., U.S.-origin semiconductor devices are included in a foreign-origin test instrument). Under Block 9, Additional Information, describe the new end-product more specifically and state how and to what extent the U.S.-origin items will be used. Complete and attach Form BIS-752-A, Reexport Territories.
(iii) Item (c): Complete this Block if your company is requesting authorization to reexport items for service and/or repair. Complete and attach Form BIS-752-A. If you plan to reexport to end-users that require prior approval by BIS, also complete and attach Form BIS-748P-B, End-User Appendix.
(iv) Item (d): Complete this Block if your company plans to transfer or resell within the country of import. State the end-use of your customers. If you plan to transfer to end-users that require prior approval by BIS, complete and attach Form BIS-748P-B, End-User Appendix.
(v) Item (e): Complete this Block if your company plans to reexport. Complete and attach Form BIS-752-A. If you plan to reexport to end-users that require prior approval by BIS, complete and attach Form BIS-748P-B, End-User Appendix.
(vi) Item (f): This item should be completed for ``other'' activities that are not defined in Block 8 paragraphs (a) through (e). Describe the proposed activities fully in Block 9 or in a letter submitted with this Form, and complete and submit Form BIS-752-A, indicating the countries to which the products derived from these activities will be exported.
Block 9: Additional Information. In addition to any information that supports other Blocks, indicate whether your company is an active consignee under any other license issued by BIS. Indicate the license and consignee numbers.
Block 10: Signature of Official of Ultimate Consignee. Include an original signature. The authority to sign Form BIS-752 may not be delegated to any person whose authority to sign is not inherent in his/her official position with the company. The signing official must include their official title with their signature. All copies must be co-signed by the applicant in the SCL holder signature block and submitted with the application to BIS. [62 FR 25466, May 9, 1997, as amended at 65 FR 42568, July 10, 2000; 73 FR 68327, Nov. 18, 2008] Sec. Supplement No. 4 to Part 752--Instructions for Completing Form BIS-
752-A, Reexport Territories
All information must be legibly typed within the lines for each Block or Box.
Block 1: Application Control No. Insert the application control No. from the relevant Form BIS-748P.
Block 2: SCL License No. Leave blank for new SCL applications. For changes to existing SCLs, include the original SCL number.
Block 3: Consignee No. Leave blank for new SCL applications. For changes to existing SCLs, include the consignee number that was provided on the original license.
Block 4: Continuation of BIS-752 Question No. Mark an ``x'' in the box next to each country you wish to select. See Sec. 752.4 of this part for countries that are not eligible for the SCL. You may request a country that is not included on Form BIS-752-A by marking an ``x'' in the ``other'' box and including the country name. [62 FR 25467, May 9, 1997] Sec. Supplement No. 5 to Part 752--Instructions for Completing Form BIS-
748P-B, End-User Appendix
All information must be legibly typed within the lines for each Block or Box.
Block 1: Application Control No. Insert the application control No. from the relevant Form BIS-748P.
Block 19: End-user. Enter each end-user's complete name, street address, city, country, postal code and telephone or facsimile number. Post Office (P.O.) Boxes are not acceptable.
Block 21: Continuation of Specific End-Use Information. Include any additional information that may help BIS in reviewing and making a determination on your application, such as the special safeguards that will be implemented to prevent diversion.
Block 24: Continuation of Additional Information. Enter additional data pertinent to the transaction as required by part 752. Enter the consignee name and complete address of the consignee responsible for the end-user(s) (i.e., recordkeeping and ICP screening, etc.). [62 FR 25467, May 9, 1997]