(a) Except as provided in paragraph (b) of this section, each carriage and stroller must comply with all applicable provisions of ASTM F833-13b, Standard Consumer Safety Performance Specification for Carriages and Strollers, approved on November 1, 2013. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from ASTM International, 100 Bar Harbor Drive, P.O. Box 0700, West Conshohocken, PA 19428; http://www.astm.org/cpsc.htm. You may inspect a copy at the Office of the Secretary, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal--register/code--of--federal regulations/ibr--locations.html.
(b) Comply with ASTM F833-13b standard with the following changes:
(1) Instead of complying with section 7.12.1 of ASTM F833-13b, comply with the following:
(i) 7.12.1 Secure the front wheels of the unit in their normal standing position so that the unit cannot move forward. Attach the tray(s) or grab bar(s) in the position that creates the bounded opening(s). Position any adjustable features (that is, grab bar, calf supports, foot rests, etc.) that may affect the bounded opening(s) to create an opening(s) size that is most likely to cause failure.
(ii) [Reserved]
(2) Instead of complying with section 7.12.3 of ASTM F833-13b, comply with the following:
(i) 7.12.3 If necessary, reattach/reposition tray(s) grab bar(s), then perform the torso probe test per 7.12.4. Position any adjustable features (that is, grab bar, calf supports, foot rests, etc.) that may affect the bounded opening(s), to create the opening(s) size that is most likely to cause failure.
(ii) [Reserved]