(a) Specifications, standards, and codes of agencies of the U.S. Government, to the extent specified in the text, form a part of the regulations of this part. In addition, under the authority vested in the Secretary under the Act, the specifications, standards, and codes of organizations which are not agencies of the U.S. Government, in effect on the date of the promulgation of the regulations of this part as listed below, to the extent specified in the text, form a part of the regulations of this part.
(b)(1) The standards listed in paragraph (d) of this section are incorporated by reference in the corresponding sections noted as the sections exist on the date of the approval, and a notice of any change in these standards will be published in the Federal Register. The Director of the Federal Register approved these incorporations by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.
(1) The standards listed in paragraph (d) of this section are incorporated by reference in the corresponding sections noted as the sections exist on the date of the approval, and a notice of any change in these standards will be published in the Federal Register. The Director of the Federal Register approved these incorporations by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.
(2) Any changes in the standards incorporated by reference in this part and an official historic file of such changes are available for inspection in the Docket Office at the national office of the Occupational Safety and Health Administration, U.S. Department of Labor, Washington, DC 20910; telephone: 202-693-2350 (TTY number: 877-889-5627).
(c) Copies of standards listed in this section and issued by private standards organizations are available for purchase from the issuing organizations at the addresses or through the other contact information listed below for these private standards organizations. In addition, these standards are available for inspection at the National Archives and Records Administration (NARA). For information on the availability of these standards at NARA, telephone: 202-741-6030, or go to http://www.archives.gov/federal--register/code--of--federal--regulations/ibr--locations.html. Also, the standards are available for inspection at any Regional Office of the Occupational Safety and Health Administration (OSHA), or at the OSHA Docket Office, U.S. Department of Labor, 200 Constitution Avenue, NW., Room N-2625, Washington, DC 20210; telephone: 202-693-2350 (TTY number: 877-889-5627).
(d)(1) Except as noted, copies of the standards listed below in this paragraph are available for purchase from the American National Standards Institute (ANSI), 25 West 43rd Street, 4th Floor, New York, NY 10036; telephone: 212-642-4900; fax: 212-398-0023; Web site: http://www.ansi.org.
(1) Except as noted, copies of the standards listed below in this paragraph are available for purchase from the American National Standards Institute (ANSI), 25 West 43rd Street, 4th Floor, New York, NY 10036; telephone: 212-642-4900; fax: 212-398-0023; Web site: http://www.ansi.org.
(i) ANSI A14.1-1975 Safety Requirements for Portable Wood Ladders, IBR approved for Sec. 1915.72(a)(6).
(ii) ANSI A14.2-1972 Safety Requirements for Portable Metal Ladders, IBR approved for Sec. 1915.72(a)(4).
(iii) ANSI B7.1-1964 Safety Code for the Use, Care, and Protection of Abrasive Wheels, IBR approval for Sec. 1915.134(c)
(iv) ANSI Z41-1999, American National Standard for Personal Protection--Protective Footwear; IBR approved for Sec. 1915.156(b)(1)(ii). Copies of ANSI Z41-1999 are available for purchase only from the National Safety Council, P.O. Box 558, Itasca, IL 60143-0558; telephone: 1-800-621-7619; fax: 708-285-0797; Web site: http://www.nsc.org.
(v) ANSI Z41-1991, American National Standard for Personal Protection--Protective Footwear; IBR approved for Sec. 1915.156(b)(1)(iii). Copies of ANSI Z41-1991 are available for purchase only from the National Safety Council, P.O. Box 558, Itasca, IL 60143-0558; telephone: 1-800-621-7619; fax: 708-285-0797; Web site: http://www.nsc.org.
(vi) ANSI Z87.1-2003, American National Standard Practice for Occupational and Educational Eye and Face Protection; IBR approved for Sec. 1915.153(b)(1)(i). Copies of ANSI Z87.1-2003 are available for purchase only from the American Society of Safety Engineers, 1800 East Oakton Street, Des Plaines, IL 60018-2187; telephone: 847-699-2929; or from the International Safety Equipment Association (ISEA), 1901 North Moore Street, Arlington, VA 22209-1762; telephone: 703-525-1695; fax: 703-528-2148; Web site: http://www.safetyequipment.org.
(vii) ANSI Z87.1-1989 (R-1998), American National Standard Practice for Occupational and Educational Eye and Face Protection; IBR approved for Sec. 1915.153(b)(1)(ii). Copies of ANSI Z87.1-1989 (R-1998) are available for purchase only from the American Society of Safety Engineers, 1800 East Oakton Street, Des Plaines, IL 60018-2187; telephone: 847-699-2929.
(viii) ANSI Z87.1-1989, American National Standard Practice for Occupational and Educational Eye and Face Protection; IBR approved for Sec. 1915.153(b)(1)(iii).
(ix) American National Standards Institute (ANSI) Z89.1-2009, American National Standard for Industrial Head Protection, approved January 26, 2009; IBR approved for Sec. 1915.155(b)(1)(i). Copies of ANSI Z89.1-2009 are available for purchase only from the International Safety Equipment Association, 1901 North Moore Street, Arlington, VA 22209-1762; telephone: 703-525-1695; fax: 703-528-2148; Web site: www.safetyequipment.org.
(x) American National Standards Institute (ANSI) Z89.1-2003, American National Standard for Industrial Head Protection; IBR approved for Sec. 1915.155(b)(1)(ii). Copies of ANSI Z89.1-2003 are available for purchase only from the International Safety Equipment Association, 1901 North Moore Street, Arlington, VA 22209-1762; telephone: 703-525-1695; fax: 703-528-2148; Web site: www.safetyequipment.org.
(xi) American National Standards Institute (ANSI) Z89.1-1997, American National Standard for Personnel Protection--Protective Headwear for Industrial Workers--Requirements; IBR approved for Sec. 1915.155(b)(1)(iii). Copies of ANSI Z89.1-1997 are available for purchase only from the International Safety Equipment Association, 1901 North Moore Street, Arlington, VA 22209-1762; telephone: 703-525-1695; fax: 703-528-2148; Web site: www.safetyequipment.org.
(xii) ANSI/IESNA RP-7-01, Recommended Practice for Lighting Industrial Facilities, ANSI approved July 26, 2001, IBR approved for Sec. 1915.82(a)(3).
(xiii) ANSI/ISEA Z308.1-2009, Revision of ANSI Z308.1-2003, Minimum Requirements for Workplace First Aid Kits and Supplies, ANSI approved May 8, 2009, IBR approved for Sec. 1915.87 Appendix A.
(2) The following material is available for purchase from the American Society of Mechanical Engineers, 345 East 47th Street, New York, New York 10017:
(i) ASME Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Unfired Pressure Vessels, 1963, IBR approved for Sec. 1915.172(a).
(3) The following material is available for purchase from the American Conference of Governmental Industrial Hygienists (ACGIH), 1014 Broadway, Cincinnati, OH 45202:
(i) Threshold limit values, 1970, IBR approved for Sec. Sec. 1915.12(b) and 1915.1000, table Z.
(4) The following material is available for purchase from the National Fire Protection Association, 1 Batterymarch Park, PO Box 9101, Quincy, MA 02269-9101:
(i) NFPA 1981-2002 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services, IBR approved for 1915.505(e)(3)(v).
(ii) NFPA 1971-2000, Standard on Protective Ensemble for Structural Fire Fighting, IBR approved for Sec. 1915.505(e)(4)(ii).
(iii) NFPA 1976-2000, Standard on Protective Ensemble for Proximity Fire Fighting, IBR approved for Sec. 1915.505(e)(5).
(iv) NFPA 1982-1998, Standard on Personal Alert Safety Systems (PASS), IBR approved for Sec. 1915.505(e)(6)(ii).
(v) NFPA 1983-2001, Standard on Fire Service Life Safety Rope and System Components, IBR approved for Sec. 1915.505(e)(7)(i).
(vi) NFPA 10-2002 Standard for Portable Fire Extinguishers, IBR approved for Sec. Sec. 1915.507(b)(1) and (b)(2).
(vii) NFPA 14-2003 Standard for the Installation of Standpipe and Hose Systems, IBR approved for Sec. Sec. 1915.507(b)(2) and (d)(1).
(viii) NFPA 72-2002 National Fire Alarm Code, IBR approved for Sec. 1915.507(c)(6).
(ix) NFPA 13-2002 Standard for the Installation of Sprinkler Systems, IBR approved for Sec. 1915.507(d)(2).
(x) NFPA 750-2003 Standard on Water Mist Fire Protection Systems, IBR approved for Sec. 1915.507(d)(2).
(xi) NFPA 25-2002, Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, IBR approved for Sec. 1915.507(d)(2).
(xii) NFPA 15-2001, Standard for Water Spray Fixed Systems for Fire Protection, IBR approved for Sec. 1915.507(d)(3).
(xiii) NFPA 11-2005 Standard for Low-, Medium-, and High-Expansion Foam, IBR approved for Sec. 1915.507(d)(3).
(xiv) NFPA 17-2002, Standard for Dry Chemical Extinguishing Systems, IBR approved for Sec. 1915.507(d)(4).
(xv) NFPA 12-2005, Standard on Carbon Dioxide Extinguishing Systems, IBR approved for Sec. 1915.507(d)(5).
(xvi) NFPA 12A-2004, Standard on Halon 1301 Fire Extinguishing Systems, IBR approved for Sec. 1915.507(d)(5).
(xvii) NFPA 2001-2004, Standard on Clean Agent Fire Extinguishing Systems, IBR approved for Sec. 1915.507(d)(5).
(xviii) NFPA 1403-2002, Standard on Live Fire Training Evolutions, IBR approved for Sec. 1915.508(d)(8).
(5) Copies of the standards listed below in this paragraph are available for purchase from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; telephone: 610-832-9585; fax: 610-832-9555; e-mail: seviceastm.org; Web site: http://www.astm.org:
(i) ASTM F-2412-2005, Standard Test Methods for Foot Protection; IBR approved for Sec. 1915.156(b)(1)(i).
(ii) ASTM F-2413-2005, Standard Specification for Performance Requirements for Protective Footwear; IBR approved for Sec. 1915.156(b)(1)(i). [61 FR 26359, May 24, 1996, as amended at 67 FR 44541, July 3, 2002; 69 FR 18803, Apr. 9, 2004; 69 FR 55702, Sept. 15, 2004; 71 FR 60846, Oct. 17, 2006; 74 FR 46357, Sept. 9, 2009; 76 FR 24698, May 2, 2011; 77 FR 37598, June 22, 2012]