Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable, except that non-continuous dischargers shall not be subject to the maximum day and maximum for monthly average mass (kg/1,000 kkg or lb/million lb of metal poured; kg/62.3 million Sm \3\ or lb/billion SCF of air scrubbed) effluent limitations for copper, lead, zinc, and total phenols. For non-continuous dischargers, annual average mass limitations and maximum day and maximum for monthly average concentration (mg/1) limitations shall apply. Concentration limitations and annual average mass limitations shall only apply to non-continuous dischargers.
(a) Casting Quench Operations.
BAT Effluent Limitations------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
kg/1,000 kkg (pounds per
million pounds) of metal
poured
---------------------------Copper (T).................................. 0.0344 0.0187Lead (T).................................... 0.0237 0.0116Zinc (T).................................... 0.0339 0.0129------------------------------------------------------------------------ ------------------------------------------------------------------------
Maximum for Annual
Maximum for monthly average
any 1 day average \1\------------------------------------------------------------------------
(mg/l) \2\ (mg/l) \2\Copper (T)........................... 0.77 0.42 0.0076Lead (T)............................. 0.53 0.26 0.0067Zinc (T)............................. 0.76 0.29 0.008------------------------------------------------------------------------\1\ kg/1,000 kkg (pounds per million pounds) of metal poured.\2\ These concentrations must be multiplied by the ratio of (5.34/x)
where x is the actual normalized process wastewater flow (in gallons
per 1,000 pounds of metal poured) for a specific plant.
(b) Die Casting Operations.
BAT Effluent Limitations------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
kg/1,000 kkg (pounds per
million pounds) of metal
poured
---------------------------Copper (T).................................. 0.0066 0.0036Lead (T).................................... 0.0046 0.0022Zinc (T).................................... 0.0066 0.0025Total phenols............................... 0.0074 0.0026------------------------------------------------------------------------ ------------------------------------------------------------------------
Maximum for Annual
Maximum for monthly average
any 1 day average \1\------------------------------------------------------------------------
(mg/l) \2\ (mg/l) \2\
Copper (T)........................... 0.77 0.42 0.0015Lead (T)............................. 0.53 0.26 0.0013Zinc (T)............................. 0.76 0.29 0.0016Total phenols........................ 0.86 0.3 0.0017------------------------------------------------------------------------\1\ kg/1,000 kkg (pounds per million pounds) of metal poured.\2\ These concentrations must be multiplied by the ratio of (1.04/x)
where x is the actual normalized process wastewater flow (in gallons
per 1,000 pounds of metal poured) for a specific plant.
(c) Melting Furnace Scrubber Operations.
BAT Effluent Limitations------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
kg/62.3 million Sm\3\
(pounds per billion SCF) of
air scrubbed
-----------------------------Copper (T)................................ 1.56 0.852Lead (T).................................. 1.07 0.527Zinc (T).................................. 1.54 0.588Total phenolse............................ 1.74 0.608------------------------------------------------------------------------ ------------------------------------------------------------------------
Maximum for Annual
Maximum for monthly average
any 1 day average \1\------------------------------------------------------------------------
(mg/l) \2\ (mg/l) \2\Copper (T)......................... 0.77 0.42 0.345Lead (T)........................... 0.53 0.26 0.304Zinc (T)........................... 0.76 0.29 0.365Total phenols...................... 0.86 0.3 0.406------------------------------------------------------------------------\1\ kg/62.3 million Sm \3\ (pounds per billion SCF) of air scrubbed.\2\ These concentrations must be multiplied by the ratio of (0.243/x)
where x is the actual normalized process wastewater flow (in gallons
per 1,000 pounds of metal poured) for a specific plant.
(d) Mold Cooling Operations.
BAT Effluent Limitations------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
kg/1,000 kkg (pounds per
million pounds) of metal
poured
---------------------------Copper (T).................................. 0.304 0.166Lead (T).................................... 0.209 0.103Zinc (T).................................... 0.3 0.114------------------------------------------------------------------------ ------------------------------------------------------------------------
Maximum
Maximum for Annual
for any 1 monthly average
day average \1\------------------------------------------------------------------------
(mg/l)\2\ (mg/l)\2\Copper (T)............................ 0.77 0.42 0.067Lead (T).............................. 0.53 0.26 0.0591Zinc (T).............................. 0.76 0.29 0.071------------------------------------------------------------------------\1\ kg/1,000 kkg (pounds per million pounds) of metal poured.\2\ These concentrations must be multiplied by the ratio of (47.3/x)
where x is the actual normalized process wastewater flow (in gallons
per 1,000 pounds of metal poured) for a specific plant. [50 FR 45247, Oct. 30, 1985; 51 FR 21762, June 16, 1986]