The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
(a) Subpart A--Hot Rolling Spent Lubricant NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper alloy
hot rolled
English units--pounds per
1,000,000 off-pounds of
copper or copper alloy
hot rolled
--------------------------Chromium..................................... 0.038 0.015Copper....................................... 0.131 0.062Lead......................................... 0.010 0.0092Nickel....................................... 0.056 0.038Zinc......................................... 0.105 0.043Oil and grease............................... 1.030 1.030TSS.......................................... 1.545 1.236pH........................................... (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(b) Subpart A--Cold Rolling Spent Lubricant NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy cold rolled
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy cold rolled
-------------------------Chromium...................................... 0.140 0.056Copper........................................ 0.485 0.231Lead.......................................... 0.037 0.034Nickel........................................ 0.208 0.140Zinc.......................................... 0.386 0.159Oil and grease................................ 3.790 3.790TSS........................................... 5.685 4.548pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(c) Subpart A--Drawing Spent Lubricant NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg of
copper or copper alloy
drawn
English units--pounds per
1,000,000 off-pounds of
copper or copper alloy
drawn
---------------------------Chromium.................................... 0.031 0.012Copper...................................... 0.108 0.051Lead........................................ 0.0085 0.0076Nickel...................................... 0.046 0.031Zinc........................................ 0.086 0.035Oil and grease.............................. 0.85 0.85TSS......................................... 1.275 1.020pH.......................................... (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(d) Subpart A--Solution Heat Treatment NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy drawn
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy heat treated
-------------------------Chromium...................................... 0.239 0.096Copper........................................ 0.826 0.394Lead.......................................... 0.064 0.058Nickel........................................ 0.355 0.239Zinc.......................................... 0.658 0.271Oil and grease................................ 6.460 6.460TSS........................................... 9.690 7.752pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(e) Subpart A--Extrusion Heat Treatment NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg of
copper or copper alloy
heat treated on an
extrusion press
English units--pounds per
1,000,000 off-pounds of
copper or copper alloy
heat treated on and
extrusion press
---------------------------Chromium.................................... 0.00074 0.00030Copper...................................... 0.0020 0.0010Lead........................................ 0.00020 0.00018Nickel...................................... 0.0010 0.00074Zinc........................................ 0.0020 0.00084Oil and grease.............................. 0.020 0.020TSS......................................... 0.030 0.024pH.......................................... (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(f) Subpart A--Annealing with Water NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg of
copper or copper alloy
annealed with water
English units--pounds per
1,000,000 off-pounds of
copper or copper alloy
annealed with water
---------------------------Chromium.................................... 0.458 0.186Copper...................................... 1.587 0.756Lead........................................ 0.124 0.111Nickel...................................... 0.682 0.458Zinc........................................ 1.264 0.520Oil and grease.............................. 12.400 12.400TSS......................................... 18.600 14.880pH.......................................... (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(g) Subpart A--Annealing with Oil NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy annealed with oil
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy annealed with oil
-------------------------Chromium...................................... 0 0Copper........................................ 0 0Lead.......................................... 0 0Nickel........................................ 0 0Zinc.......................................... 0 0Oil and grease................................ 0 0TSS........................................... 0 0pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(h) Subpart A--Alkaline Cleaning Rinse NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy alkaline cleaned
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy alkaline cleaned
-------------------------Chromium...................................... 1.559 0.632Copper........................................ 5.393 2.570Lead.......................................... 0.421 0.379Nickel........................................ 2.317 1.559Zinc.......................................... 4.298 1.769Oil and grease................................ 42.140 42.140TSS........................................... 63.210 50.568pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(i) Subpart A--Alkaline Cleaning Rinse for Forged Parts NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy forged parts
alkaline cleaned
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy forged parts
alkaline cleaned
-------------------------Chromium...................................... 4.677 1.896Copper........................................ 16.181 7.711Lead.......................................... 1.264 1.137Nickel........................................ 6.953 4.677Zinc.......................................... 12.894 5.309Oil and grease................................ 126.420 126.420TSS........................................... 189.630 151.704pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(j) Subpart A--Alkaline Cleaning Bath NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg of
copper or copper alloy
alkaline cleaned
English units--pounds per
1,000,000 off-pounds of
copper or copper alloy
alkaline cleaned
---------------------------Chromium.................................... 0.017 0.0070Copper...................................... 0.059 0.028Lead........................................ 0.0046 0.0042Nickel...................................... 0.025 0.017Zinc........................................ 0.047 0.019Oil and grease.............................. 0.46 0.46TSS......................................... 0.70 0.56pH.......................................... (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(k) Subpart A--Pickling Rinse NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy pickled
English units--pounds
per/1,000,000 off-pounds
of copper or copper
alloy pickled
-------------------------Chromium...................................... 0.216 0.087Copper........................................ 0.748 0.356Lead.......................................... 0.058 0.052Nickel........................................ 0.321 0.216Zinc.......................................... 0.596 0.245Oil and grease................................ 5.850 5.850TSS........................................... 8.775 7.020pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(l) Subpart A--Pickling Rinse for Forged Parts NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy forged parts
pickled
English units--pounds
per/1,000,000 off-pounds
of copper or copper
alloy forged parts
pickled
-------------------------Chromium...................................... 0.649 0.263Copper........................................ 2.246 1.070Lead.......................................... 0.175 0.157Nickel........................................ 0.965 0.649Zinc.......................................... 1.790 0.737Oil and grease................................ 17.550 17.550TSS........................................... 26.325 21.060pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(m) Subpart A--Pickling Bath NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy pickled
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy pickled
-------------------------Chromium...................................... 0.042 0.017Copper........................................ 0.148 0.070Lead.......................................... 0.011 0.010Nickel........................................ 0.063 0.042Zinc.......................................... 0.118 0.048Oil and grease................................ 1.160 1.160TSS........................................... 1.740 1.392pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(n) Subpart A--Pickling Fume Scrubber NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy pickled.
English units-pounds per
1,000,000 off-pounds of
copper or copper alloy
pickled
-------------------------Chromium...................................... 0.231 0.093Copper........................................ 0.801 0.381Lead.......................................... 0.062 0.056Nickel........................................ 0.344 0.231Zinc.......................................... 0.638 0.262Oil and grease................................ 6.260 6.260TSS........................................... 9.390 7.512pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(o) Subpart A--Tumbling or Burnishing NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
tumbled or burnished
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy tumbled or
burnished
-------------------------Chromium...................................... 0.215 0.087Copper........................................ 0.746 0.355Lead.......................................... 0.058 0.052Nickel........................................ 0.320 0.215Zinc.......................................... 0.594 0.244Oil and grease................................ 5.830 5.830TSS........................................... 8.745 6.996pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(p) Subpart A--Surface Coating NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy surface coated
English units--pounds
per 1,000,000 off-pounds
of copper or copper
alloy surface coated
-------------------------Chromium...................................... 0.274 0.111Copper........................................ 0.951 0.453Lead.......................................... 0.074 0.066Nickel........................................ 0.408 0.274Zinc.......................................... 0.757 0.312Oil and grease................................ 7.430 7.430TSS........................................... 11.145 8.916pH............................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range of 7.5 to 10.0 at all times.
(q) Subpart A--Miscellaneous Waste Streams NSPS. ------------------------------------------------------------------------
Maximum for
Pollutant or pollutant property Maximum for monthly
any 1 day average------------------------------------------------------------------------
Metric units--mg/off-kg
of copper or copper
alloy formed
English units--pounds/
1,000,000 off-pounds of
copper or copper alloy
formed
-------------------------Chromium...................................... 0.008 0.003Copper........................................ 0.027 0.013Lead.......................................... 0.0021 0.0019Nickel........................................ 0.011 0.008Zinc.......................................... 0.022 0.009Oil and grease................................ 0.218 0.218TSS........................................... 0.327 0.261pH............................................ (\1\) (\1\)------------------------------------------------------------------------Within the range of 7.5 to 10.0 at all times. [48 FR 36957, Aug. 15, 1983; 48 FR 50718, Nov. 3, 1983]