Except as provided in 40 CFR 125.30 through 32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
Subpart B--Electronic Crystals BPT Effluent Limitations------------------------------------------------------------------------
Average of
daily values
Pollutant or pollutant property Maximum for for 30
any 1 day consecutive
days------------------------------------------------------------------------
Milligrams per liter (mg/
l)
---------------------------TTO \1\..................................... 1.37 (\3\)Arsenic (T) \2\............................. 2.09 0.83Fluoride (T)................................ 32.0 17.4TSS......................................... 61.0 23.0pH.......................................... (\4\) (\4\)------------------------------------------------------------------------\1\ Total toxic organics.\2\ The arsenic (T) limitation only applies to manufacturers of gallium
or indium arsenide crystals.\3\ Not applicable.\4\ Within the range of 6.0 to 9.0.