(a) Existing cupolas and curing ovens. You must install any control devices and monitoring equipment necessary to meet the standards in this subpart, complete performance testing, and demonstrate compliance with all requirements of this subpart no later than the following:
(1) June 2, 2002; or
(2) June 3, 2003 if you apply for and receive a one-year extension under section 112(i)(3)(B) of the Act.
(b) New and reconstructed cupolas and curing ovens. You must install any control devices or monitoring equipment necessary to meet the standards in this subpart, complete performance testing, and demonstrate compliance with all requirements of this subpart by the dates in Sec. 63.7 of the general provisions in subpart A of this part.
(c) You must comply with the standards in Sec. Sec. 63.1178 and 63.1179 of this subpart on and after the dates in paragraphs (a) and (b) of this section.
(d) You must comply with these standards at all times except during periods of startup, shutdown, or malfunction.
Compliance With Standards