To comply with the CO standards, you must meet all of the following:
(a) Install, calibrate, maintain, and operate a device that continuously measures the operating temperature in the firebox of each thermal incinerator.
(b) Do a performance test as specified in Sec. 63.1188 of this subpart and show compliance with the CO emission limits while the device for measuring incinerator operating temperature is installed, operational, and properly calibrated. Establish the average operating temperature as specified in Sec. 63.1185(a) of this subpart.
(c) Following the performance test, measure and record the average operating temperature of the incinerator as specified in Sec. 63.1185(b) of this subpart.
(d) Maintain the operating temperature of the incinerator so that the average operating temperature for each three-hour block period never falls below the average temperature established during the performance test.
(e) Operate and maintain the incinerator as specified in your operations, maintenance, and monitoring plan required by Sec. 63.1187 of this subpart.