Code of Federal Regulations (alpha)

CFR /  Title 40  /  Part 63  /  Sec. 63.1319 PET and polystyrene affected sources--recordkeeping

(a) Except as specified in paragraphs (b) and (c) of this section, owners or operators using a control or recovery device to comply with Sec. 63.1316 shall comply with the applicable recordkeeping provisions specified in Sec. 63.1315(a), except that, for the purposes of this paragraph (a), references to group determinations (i.e., total resource effectiveness) do not apply, and owners or operators are not required to comply with Sec. 63.113.

(b) Records demonstrating compliance with the applicability determination procedure for PET affected sources using a dimethyl terephthalate process. Owners or operators complying with Sec. 63.1316(b)(1)(i) by demonstrating that mass emissions per mass product are less than or equal to the level specified in Sec. 63.1316(b)(1)(i) (i.e., 0.12 kg organic HAP per Mg of product) shall keep the following records.

(1) Results of the mass emissions per mass product calculation specified in Sec. 63.1318(b).

(2) Records of any change in process operation that increases the mass emissions per mass product.

(c) Records demonstrating compliance with temperature limits for final condensers. Owners or operators of continuous process vents complying with Sec. 63.1316(b)(1)(i)(B) or Sec. 63.1316(c)(1)(ii) shall keep records of the daily averages required by Sec. 63.1318, per the recordkeeping provisions specified in Sec. 63.1335(d).[61 FR 48229, Sept. 12, 1996, as amended at 65 FR 38111, June 19, 2000; 66 FR 36938, July 16, 2001; 79 FR 17366, Mar. 27, 2014]