Code of Federal Regulations (alpha)

CFR /  Title 40  /  Part 63  /  Sec. 63.1328 Heat exchange systems provisions.

(a) Except as specified in paragraph (b) of this section, each owner or operator of an affected source shall comply with Sec. 63.104, with the differences noted in paragraphs (c) through (h) of this section, for the purposes of this subpart.

(b) The provisions of paragraph (a) of this section do not apply to each process contact cooling tower that is associated with an existing affected source manufacturing PET.

(c) When the term ``chemical manufacturing process unit'' is used in Sec. 63.104, the term ``thermoplastic product process unit'' shall apply for purposes of this subpart, with the exception noted in paragraph (d) of this section.

(d) When the phrase ``a chemical manufacturing process unit meeting the conditions of Sec. 63.100(b)(1) through (b)(3) of this subpart, except for chemical manufacturing process units meeting the condition specified in Sec. 63.100(c) of this subpart'' is used in Sec. 63.104(a), the term ``a TPPU, except for TPPUs meeting the condition specified in Sec. 63.1310(b)'' shall apply for purposes of this subpart.

(e) When Sec. 63.104 refers to Table 4 of subpart F of this part or Table 9 of subpart G of this part, the owner or operator is only required to consider organic HAP listed on Table 6 of this subpart, except for ethylene glycol which need not be considered under this section, for purposes of this subpart.

(f) When Sec. 63.104(c)(3) specifies the monitoring plan retention requirements, and when Sec. 63.104(f)(1) refers to the record retention requirements in Sec. 63.103(c)(1), the requirements in Sec. Sec. 63.1335(a) and 63.1335(h) shall apply, for purposes of this subpart.

(g) When Sec. 63.104(f)(2) requires information to be reported in the Periodic Reports required by Sec. 63.152(c), the owner or operator shall instead report the information specified in Sec. 63.104(f)(2) in the Periodic Reports required by Sec. 63.1335(e)(6), for the purposes of this subpart.

(h) The compliance date for heat exchange systems subject to the provisions of this section is specified in Sec. 63.1311.[65 FR 38124, June 19, 2000]