(a) Following the initial compliance period, you must complete a compliance demonstration according to the requirements in Sec. 63.4951(h) for each subsequent compliance period. Each month following the initial compliance period described in Sec. 63.4950 is a compliance period.
(b) If the organic HAP emission rate for any compliance period exceeded the applicable emission limit in Sec. 63.4890, this is a deviation from the emission limitations for that compliance period and must be reported as specified in Sec. Sec. 63.4910(c)(6) and 63.4920(a)(6).
(c) As part of each semiannual compliance report required by Sec. 63.4920, you must identify the coating operation or group of coating operations for which you used the emission rate without add-on controls option. If there were no deviations from the emission limitations, you must submit an affirmative statement that the coating operation or group of coating operations was in compliance with the emission limitations during the reporting period because the organic HAP emission rate for each compliance period was less than or equal to the applicable emission limit in Sec. 63.4890.
(d) You must maintain records as specified in Sec. Sec. 63.4930 and 63.4931.
Compliance Requirements for the Emission Rate With Add-On Controls
Option