In addition to the information required by Sec. 98.3(c), each annual report must contain the following information for each electric power system, by chemical:
(a) Nameplate capacity of equipment (pounds) containing SF6 and nameplate capacity of equipment (pounds) containing each PFC:
(1) Existing at the beginning of the year (excluding hermetically sealed-pressure switchgear).
(2) New during the year (all SF6-insulated equipment, including hermetically sealed-pressure switchgear).
(3) Retired during the year (all SF6-insulated equipment, including hermetically sealed-pressure switchgear).
(b) Transmission miles (length of lines carrying voltages above 35 kilovolt).
(c) Distribution miles (length of lines carrying voltages at or below 35 kilovolt).
(d) Pounds of SF6 and PFC stored in containers, but not in energized equipment, at the beginning of the year.
(e) Pounds of SF6 and PFC stored in containers, but not in energized equipment, at the end of the year.
(f) Pounds of SF6 and PFC purchased in bulk from chemical producers or distributors.
(g) Pounds of SF6 and PFC purchased from equipment manufacturers or distributors with or inside equipment, including hermetically sealed-pressure switchgear.
(h) Pounds of SF6 and PFC returned to facility after off-site recycling.
(i) Pounds of SF6 and PFC in bulk and contained in equipment sold to other entities.
(j) Pounds of SF6 and PFC returned to suppliers.
(k) Pounds of SF6 and PFC sent off-site for recycling.
(l) Pounds of SF6 and PFC sent off-site for destruction.