(a) The weather deck on a well deck vessel must be watertight.
(b) The area required on a well deck vessel for drainage of well formed by the bulwarks shall be determined by Sec. 178.450.
(c) The freeing ports or scuppers on a well deck vessel must be located to allow rapid clearing of water in all probable conditions of list and trim.
(d) The deck of well deck vessel that operates on exposed or partially protected waters must be at least 255 millimeters (10 inches) above the deepest load waterline unless the vessel complies with:
(1) The intact stability requirements of Sec. Sec. 170.170, 170.173, 171.050, 171.055, and 171.057 in subchapter S of this chapter;
(2) The Type II subdivision requirements in Sec. Sec. 171.070, 171.072, and 171.073 in subchapter S of this chapter; and
(3) The damage stability requirements in Sec. 171.080 in subchapter S of this chapter.