(a) Heating boilers shall be designed, constructed, inspected, tested, and stamped in accordance with section IV of the ASME Boiler and Pressure Vessel Code (incorporated by reference; see 46 CFR 53.01-1) as limited, modified, or replaced by specific requirements in this part. The provisions in the appendices to section IV of the ASME Boiler and Pressure Vessel Code are adopted and shall be followed when the requirements in section IV make them mandatory. For general information, table 53.01-3(a) lists the various paragraphs in section IV of the ASME Boiler and Pressure Vessel Code that are limited, modified, or replaced by regulations in this part.
Table 53.01-3(a)--Limitations and Modifications in the Adoption of
Section IV of the ASME Boiler and Pressure Vessel Code------------------------------------------------------------------------
Paragraphs in Section IV of the ASME Boiler and Pressure Unit of
Vessel Code \1\ and disposition this part------------------------------------------------------------------------HG-100 modified by......................................... 53.01-5(b)HG-101 replaced by......................................... 53.01-10HG-400 modified by......................................... 53.05-1HG-400.2 modified by....................................... 53.05-2HG-401 modified by......................................... 53.05-1HG-401.2 modified by....................................... 53.05-3HG-500 through HG-540 modified by.......................... 53.10-3HG-600 through HG-640 modified by.......................... 53.12-1------------------------------------------------------------------------\1\ The references to specific provisions in the ASME Boiler and
Pressure Vessel Code are coded. The first letter, such as ``H,''
refers to section IV. The second letter, such as ``G,'' refers to a
part or subpart in section IV. The number following the letters refers
to the paragraph so numbered in the text of the part or subpart in
section IV.
(b) References to the ASME Boiler and Pressure Vessel Code, such as paragraph HG-307, indicate:
H = Section IV of the ASME Boiler and Pressure Vessel Code.
G = Part containing general requirements.
3 = Article in part.
307 = Paragraph within Article 3.
(c) When a paragraph or a section of the regulations in this part relates to material in section IV of the ASME Boiler and Pressure Vessel Code, the relationship with the code will be shown immediately following the heading of the section or at the beginning of the paragraph, as follows:
(1) (Modifies H------.) This indicates that the material in H------ is generally applicable but is being altered, amplified or augmented.
(2) (Replaces H------.) This indicates that H------ does not apply.
(3) (Reproduces H------.) This indicates that H------ is being identically reproduced for convenience, not for emphasis. [CGFR 68-82, 33 FR 18826, Dec. 18, 1968, as amended by CGFR 69-127, 35 FR 9976, June 17, 1970; CGD 81-79, 50 FR 9435, Mar. 8, 1985. Redesignated and amended by CGD 88-032, 56 FR 35821, July 29, 1991; USCG-2003-16630, 73 FR 65163, Oct. 31, 2008]