(a) This part prescribes standards, or portions thereof, incorporated by reference into this part with the approval of the Director of the Federal Register in 5 U.S.C. 552(a) and 1 CFR part 51. The materials listed in this section have the full force of law. To enforce any edition other than that specified in this section, PHMSA must publish a notice of change in the Federal Register.
(1) Availability of standards incorporated by reference. All of the materials incorporated by reference are available for inspection from several sources, including the following:
(i) The Office of Pipeline Safety, Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue SE., Washington, DC 20590. For more information contact 202-366-4046 or go to the PHMSA Web site at: http://www.phmsa.dot.gov/pipeline/regs.
(ii) The National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030 or go to the NARA Web site at: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(iii) Copies of standards incorporated by reference in this part can also be purchased or are otherwise made available from the respective standards-developing organization at the addresses provided in the centralized IBR section below.
(2) [Reserved]
(b) American Petroleum Institute (API), 1220 L Street NW., Washington, DC 20005, phone: 202-682-8000, http://api.org/.
(1) API Recommended Practice 5L1, ``Recommended Practice for Railroad Transportation of Line Pipe,'' 7th edition, September 2009, (API RP 5L1), IBR approved for Sec. 192.65(a).
(2) API Recommended Practice 5LT, ``Recommended Practice for Truck Transportation of Line Pipe,'' First edition, March 2012, (API RP 5LT), IBR approved for Sec. 192.65(c).
(3) API Recommended Practice 5LW, ``Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels,'' 3rd edition, September 2009, (API RP 5LW), IBR approved for Sec. 192.65(b).
(4) API Recommended Practice 80, ``Guidelines for the Definition of Onshore Gas Gathering Lines,'' 1st edition, April 2000, (API RP 80), IBR approved for Sec. 192.8(a).
(5) API Recommended Practice 1162, ``Public Awareness Programs for Pipeline Operators,'' 1st edition, December 2003, (API RP 1162), IBR approved for Sec. 192.616(a), (b), and (c).
(6) API Recommended Practice 1165, ``Recommended Practice for Pipeline SCADA Displays,'' First edition, January 2007, (API RP 1165), IBR approved for Sec. 192.631(c).
(7) API Specification 5L, ``Specification for Line Pipe,'' 45th edition, effective July 1, 2013, (API Spec 5L), IBR approved for Secs. 192.55(e); 192.112(a), (b), (d), (e); 192.113; and Item I, Appendix B to Part 192.
(8) ANSI/API Specification 6D, ``Specification for Pipeline Valves,''23rd edition, effective October 1, 2008, including Errata 1 (June 2008), Errata2 (/November 2008), Errata 3 (February 2009), Errata 4 (April 2010), Errata 5 (November 2010), Errata 6 (August 2011) Addendum 1 (October 2009), Addendum 2 (August 2011), and Addendum 3 (October 2012), (ANSI/API Spec 6D), IBR approved for Sec. 192.145(a).
(9) API Standard 1104, ``Welding of Pipelines and Related Facilities,'' 20th edition, October 2005, including errata/addendum (July 2007) and errata 2 (2008), (API Std 1104), IBR approved for Sec. Sec. 192.225(a); 192.227(a); 192.229(c); 192.241(c); and Item II, Appendix B.
(c) ASME International (ASME), Three Park Avenue, New York, NY 10016, 800-843-2763 (U.S./Canada), http://www.asme.org/.
(1) ASME/ANSI B16.1-2005, ``Gray Iron Pipe Flanges and Flanged Fittings: (Classes 25, 125, and 250),'' August 31, 2006, (ASME/ANSI B16.1), IBR approved for Sec. 192.147(c).
(2) ASME/ANSI B16.5-2003, ``Pipe Flanges and Flanged Fittings, ``October 2004, (ASME/ANSI B16.5), IBR approved for Secs. 192.147(a) and 192.279.
(3) ASME/ANSI B31G-1991 (Reaffirmed 2004), ``Manual for Determining the Remaining Strength of Corroded Pipelines,'' 2004, (ASME/ANSI B31G), IBR approved for Secs. 192.485(c) and 192.933(a).
(4) ASME/ANSI B31.8-2007, ``Gas Transmission and Distribution Piping Systems,'' November 30, 2007, (ASME/ANSI B31.8), IBR approved for Secs. 192.112(b) and 192.619(a).
(5) ASME/ANSI B31.8S-2004, ``Supplement to B31.8 on Managing System Integrity of Gas Pipelines,'' 2004, (ASME/ANSI B31.8S-2004), IBR approved for Secs. 192.903 note to Potential impact radius; 192.907 introductory text, (b); 192.911 introductory text, (i), (k), (l), (m); 192.913(a), (b), (c); 192.917 (a), (b), (c), (d), (e); 192.921(a); 192.923(b); 192.925(b); 192.927(b), (c); 192.929(b); 192.933(c), (d); 192.935 (a), (b); 192.937(c); 192.939(a); and 192.945(a).
(6) ASME Boiler & Pressure Vessel Code, Section I, ``Rules for Construction of Power Boilers 2007,'' 2007 edition, July 1, 2007, (ASME BPVC, Section I), IBR approved for Sec. 192.153(b).
(7) ASME Boiler & Pressure Vessel Code, Section VIII, Division 1 ``Rules for Construction of Pressure Vessels,'' 2007 edition, July 1, 2007, (ASME BPVC, Section VIII, Division 1), IBR approved for Secs. 192.153(a), (b), (d); and 192.165(b).
(8) ASME Boiler & Pressure Vessel Code, Section VIII, Division 2 ``Alternate Rules, Rules for Construction of Pressure Vessels,'' 2007 edition, July 1, 2007, (ASME BPVC, Section VIII, Division 2), IBR approved for Secs. 192.153(b), (d); and 192.165(b).
(9) ASME Boiler & Pressure Vessel Code, Section IX: ``Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators,'' 2007 edition, July 1, 2007, ASME BPVC, Section IX, IBR approved for Secs. 192.225(a); 192.227(a); and Item II, Appendix B to Part 192.
(d) American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428, phone: (610) 832-9585, Web site: http://www.astm.org/.
(1) ASTM A53/A53M-10, ``Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless,'' approved October 1, 2010, (ASTM A53/A53M), IBR approved for Sec. 192.113; and Item II, Appendix B to Part 192.
(2) ASTM A106/A106M-10, ``Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service,'' approved October 1, 2010, (ASTM A106/A106M), IBR approved for Sec. 192.113; and Item I, Appendix B to Part 192.
(3) ASTM A333/A333M-11, ``Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service,'' approved April 1, 2011, (ASTM A333/A333M), IBR approved for Sec. 192.113; and Item I, Appendix B to Part 192.
(4) ASTM A372/A372M-10, ``Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels,'' approved October 1, 2010, (ASTM A372/A372M), IBR approved for Sec. 192.177(b).
(5) ASTM A381-96 (reapproved 2005), ``Standard Specification for Metal-Arc Welded Steel Pipe for Use with High-Pressure Transmission Systems,'' approved October 1, 2005, (ASTM A381), IBR approved for Sec. 192.113; and Item I, Appendix B to Part 192.
(6) ASTM A578/A578M-96 (reapproved 2001), ``Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications,'' (ASTM A578/A578M), IBR approved for Sec. 192.112(c).
(7) ASTM A671/A671M-10, ``Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures,'' approved April 1, 2010, (ASTM A671/A671M), IBR approved for Sec. 192.113; and Item I, Appendix B to Part 192.
(8) ASTM A672/A672M-09, ``Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures,'' approved October 1, 2009, (ASTM A672/672M), IBR approved for Sec. 192.113 and Item I, Appendix B to Part 192.
(9) ASTM A691/A691M-09, ``Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures,'' approved October 1, 2009, (ASTM A691/A691M), IBR approved for Sec. 192.113 and Item I, Appendix B to Part 192.
(10) ASTM D638-03, ``Standard Test Method for Tensile Properties of Plastics,'' 2003, (ASTM D638), IBR approved for Sec. 192.283(a) and (b).
(11) ASTM D2513-87, ``Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings,'' (ASTM D2513-87), IBR approved for Sec. 192.63(a).
(12) ASTM D2513-99, ``Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings,'' (ASTM D 2513-99), IBR approved for Secs. 192.191(b); 192.281(b); 192.283(a) and Item 1, Appendix B to Part 192.
(13) ASTM D2513-09a, ``Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings,'' approved December 1, 2009, (ASTM D2513-09a), IBR approved for Secs. 192.123(e); 192.191(b); 192.283(a); and Item 1, Appendix B to Part 192.
(14) ASTM D2517-00, ``Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings,'' (ASTM D 2517), IBR approved for Secs. 192.191(a); 192.281(d); 192.283(a); and Item I, Appendix B to Part 192.
(15) ASTM F1055-1998, ``Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controller Polyethylene Pipe and Tubing,'' (ASTM F1055), IBR approved for Sec. 192.283(a).
(e) Gas Technology Institute (GTI), formerly the Gas Research Institute (GRI)), 1700 S. Mount Prospect Road, Des Plaines, IL 60018, phone: 847-768-0500, Web site: www.gastechnology.org.
(1) GRI 02/0057 (2002) ``Internal Corrosion Direct Assessment of Gas Transmission Pipelines Methodology,'' (GRI 02/0057), IBR approved for Sec. 192.927(c).
(2) [Reserved]
(f) Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park St. NE., Vienna, VA 22180, phone: 703-281-6613, Web site: http://www.mss-hq.org/.
(1) MSS SP-44-2010, Standard Practice, ``Steel Pipeline Flanges,'' 2010 edition, (including Errata (May 20, 2011)), (MSS SP-44), IBR approved for Sec. 192.147(a).
(2) [Reserved]
(g) NACE International (NACE), 1440 South Creek Drive, Houston, TX 77084: phone: 281-228-6223 or 800-797-6223, Web site: http://www.nace.org/Publications/.
(1) ANSI/NACE SP0502-2010, Standard Practice, ``Pipeline External Corrosion Direct Assessment Methodology,'' revised June 24, 2010, (NACE SP0502), IBR approved for Secs. 192.923(b); 192.925(b); 192.931(d); 192.935(b) and 192.939(a).
(2) [Reserved]
(h) National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, Massachusetts 02169, phone: 1 617 984-7275, Web site: http://www.nfpa.org/.
(1) NFPA-30 (2012), ``Flammable and Combustible Liquids Code,'' 2012 edition, June 20, 2011, including Errata 30-12-1 (September 27, 2011) and Errata 30-12-2 (November 14, 2011), (NFPA-30), IBR approved for Sec. 192.735(b).
(2) NFPA-58 (2004), ``Liquefied Petroleum Gas Code (LP-Gas Code),'' (NFPA-58), IBR approved for Sec. 192.11(a), (b), and (c).
(3) NFPA-59 (2004), ``Utility LP-Gas Plant Code,'' (NFPA-59), IBR approved for Sec. 192.11(a), (b); and (c).
(4) NFPA-70 (2011), ``National Electrical Code,'' 2011 edition, issued August 5, 2010, (NFPA-70), IBR approved for Secs. 192.163(e); and 192.189(c).
(i) Pipeline Research Council International, Inc. (PRCI), c/o Technical Toolboxes, 3801 Kirby Drive, Suite 520, P.O. Box 980550, Houston, TX 77098, phone: 713-630-0505, toll free: 866-866-6766, Web site: http://www.ttoolboxes.com/. (Contract number PR-3-805.)
(1) AGA, Pipeline Research Committee Project, PR-3-805, ``A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe,'' (December 22, 1989), (PRCI PR-3-805 (R-STRENG)), IBR approved for Secs. 192.485(c); 192.933(a) and (d).
(2) [Reserved]
(j) Plastics Pipe Institute, Inc. (PPI), 105 Decker Court, Suite 825 Irving TX 75062, phone: 469-499-1044, http://www.plasticpipe.org/.
(1) PPI TR-3/2008 HDB/HDS/PDB/SDB/MRS Policies (2008), ``Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Pressure Design Basis (PDB), Strength Design Basis (SDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or Pipe, '' May 2008, IBR approved for Sec. 192.121.
(2) [Reserved] [35 FR 13257, Aug. 19, 1970]
Editorial Note: For Federal Register citations affecting Sec. 192.7, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.fdsys.gov.