|
Section 111.01-1
|
Placement of equipment |
|
Section 111.01-3
|
Protection from bilge water |
|
Section 111.01-5
|
Accessibility and spacing |
|
Section 111.01-7
|
Degrees of protection |
|
Section 111.01-9
|
Corrosion-resistant parts |
|
Section 111.01-11
|
Limitations on porcelain use |
|
Section 111.01-13
|
Temperature ratings |
|
Section 111.01-15
|
Voltage and frequency variations |
|
Section 111.01-17
|
Inclination of the vessel |
|
Section 111.01-19
|
Purpose |
|
Section 111.05-1
|
Design, construction, and installation; general |
|
Section 111.05-3
|
Armored and metallic sheathed cable |
|
Section 111.05-7
|
Masts |
|
Section 111.05-9
|
Hull return |
|
Section 111.05-11
|
Grounding connection |
|
Section 111.05-13
|
Neutral grounding |
|
Section 111.05-15
|
Generation and distribution system grounding |
|
Section 111.05-17
|
Tank vessels; grounded distribution systems |
|
Section 111.05-19
|
Grounded distribution systems on OSVs designed to carry flammable or combustible liquids with closed-cup flashpoints |
|
Section 111.05-20
|
Ground detection |
|
Section 111.05-21
|
Location of ground indicators |
|
Section 111.05-23
|
Ungrounded systems |
|
Section 111.05-25
|
Grounded neutral alternating current systems |
|
Section 111.05-27
|
Dual voltage direct current systems |
|
Section 111.05-29
|
Grounding conductors for systems |
|
Section 111.05-31
|
Equipment safety grounding (bonding) conductors |
|
Section 111.05-33
|
Overcurrent devices |
|
Section 111.05-37
|
Definitions |
|
Section 111.10-1
|
Two generating sources |
|
Section 111.10-3
|
Power requirements, generating sources |
|
Section 111.10-4
|
Multiple energy sources |
|
Section 111.10-5
|
Dead ship |
|
Section 111.10-7
|
Ship's service supply transformers; two required |
|
Section 111.10-9
|
Prime movers |
|
Section 111.12-1
|
Excitation |
|
Section 111.12-3
|
Construction and testing of generators |
|
Section 111.12-5
|
Voltage regulation and parallel operation |
|
Section 111.12-7
|
Generator cables |
|
Section 111.12-9
|
Generator protection |
|
Section 111.12-11
|
Propulsion generator protection |
|
Section 111.12-13
|
General |
|
Section 111.15-1
|
Battery construction |
|
Section 111.15-2
|
Battery categories |
|
Section 111.15-3
|
Battery installation |
|
Section 111.15-5
|
Ventilation |
|
Section 111.15-10
|
Conductors |
|
Section 111.15-20
|
Overload and reverse current protection |
|
Section 111.15-25
|
Battery chargers |
|
Section 111.15-30
|
General requirements |
|
Section 111.20-1
|
Temperature rise |
|
Section 111.20-5
|
Autotransformers |
|
Section 111.20-10
|
Protection of transformers against overcurrent |
|
Section 111.20-15
|
General requirements |
|
Section 111.25-1
|
Marking |
|
Section 111.25-5
|
Duty cycle |
|
Section 111.25-15
|
Location and installation |
|
Section 111.30-1
|
Accessibility of switchboard components and connections |
|
Section 111.30-3
|
Circuit breakers removable from the front |
|
Section 111.30-4
|
Construction |
|
Section 111.30-5
|
Deck coverings |
|
Section 111.30-11
|
Nameplates |
|
Section 111.30-15
|
Protection of instrument circuits |
|
Section 111.30-17
|
Buses and wiring |
|
Section 111.30-19
|
Generation systems greater than 3000 kw |
|
Section 111.30-24
|
Alternating-current ship's service switchboards |
|
Section 111.30-25
|
Direct current ship's service switchboards |
|
Section 111.30-27
|
Emergency switchboards |
|
Section 111.30-29
|
General |
|
Section 111.33-1
|
Nameplate data |
|
Section 111.33-3
|
Installation |
|
Section 111.33-5
|
Alarms and shutdowns |
|
Section 111.33-7
|
Ventilation exhaust |
|
Section 111.33-9
|
Propulsion systems |
|
Section 111.33-11
|
Electrical propulsion installations |
|
Section 111.35-1
|
Panelboard standard |
|
Section 111.40-1
|
Enclosure |
|
Section 111.40-5
|
Location |
|
Section 111.40-7
|
Locking device |
|
Section 111.40-9
|
Numbered switching unit and panelboard directory |
|
Section 111.40-11
|
Rating |
|
Section 111.40-13
|
Overcurrent device |
|
Section 111.40-15
|
Protection of equipment |
|
Section 111.50-1
|
Systems integration |
|
Section 111.50-2
|
Protection of conductors |
|
Section 111.50-3
|
Location of overcurrent protective devices |
|
Section 111.50-5
|
Enclosures |
|
Section 111.50-7
|
Disconnecting and guarding |
|
Section 111.50-9
|
Purpose |
|
Section 111.51-1
|
Protection of vital equipment |
|
Section 111.51-3
|
General |
|
Section 111.52-1
|
Systems below 1500 kilowatts |
|
Section 111.52-3
|
Systems 1500 kilowatts or above |
|
Section 111.52-5
|
General |
|
Section 111.53-1
|
Circuit breakers |
|
Section 111.54-1
|
Remote control |
|
Section 111.54-3
|
General |
|
Section 111.55-1
|
Circuit connections |
|
Section 111.55-3
|
General |
|
Section 111.59-1
|
No mechanical cooling |
|
Section 111.59-3
|
Construction and testing of cable |
|
Section 111.60-1
|
Specialty cable for communication and RF applications |
|
Section 111.60-2
|
Cable application |
|
Section 111.60-3
|
Minimum cable conductor size |
|
Section 111.60-4
|
Cable installation |
|
Section 111.60-5
|
Fiber optic cable |
|
Section 111.60-6
|
Demand loads |
|
Section 111.60-7
|
Segregation of vital circuits |
|
Section 111.60-9
|
Wire |
|
Section 111.60-11
|
Flexible electric cord and cables |
|
Section 111.60-13
|
Connections and terminations |
|
Section 111.60-17
|
Cable splices |
|
Section 111.60-19
|
Cable insulation tests |
|
Section 111.60-21
|
Metal-clad (Type MC) cable |
|
Section 111.60-23
|
General |
|
Section 111.70-1
|
Motor controllers and motor-control centers |
|
Section 111.70-3
|
Heater circuits |
|
Section 111.70-5
|
Remote control, interlock, and indicator circuits |
|
Section 111.70-7
|
Lighting feeders |
|
Section 111.75-1
|
Lighting branch circuits |
|
Section 111.75-5
|
Lighting requirements |
|
Section 111.75-15
|
Lighting of survival craft and rescue boats |
|
Section 111.75-16
|
Navigation lights |
|
Section 111.75-17
|
Signaling lights |
|
Section 111.75-18
|
Lighting fixtures |
|
Section 111.75-20
|
Overcurrent protection |
|
Section 111.77-1
|
Appliances |
|
Section 111.77-3
|
Receptacle outlets; general |
|
Section 111.79-1
|
Grounding pole |
|
Section 111.79-3
|
Transmitting power between receptacles |
|
Section 111.79-9
|
Lifeboat receptacles |
|
Section 111.79-11
|
Different voltages and power types |
|
Section 111.79-13
|
Receptacles for refrigerated containers |
|
Section 111.79-15
|
Outlet boxes and junction boxes; general |
|
Section 111.81-1
|
Cables entering boxes |
|
Section 111.81-3
|
General |
|
Section 111.83-1
|
Bottom entrance and protected enclosures |
|
Section 111.83-5
|
Electric oil immersion heaters |
|
Section 111.85-1
|
Applicability |
|
Section 111.87-1
|
General requirements |
|
Section 111.87-3
|
Power, control, and interlock circuits |
|
Section 111.91-1
|
Applicability |
|
Section 111.95-1
|
General requirements |
|
Section 111.95-3
|
Wiring of boat winch components |
|
Section 111.95-7
|
Applicability |
|
Section 111.97-1
|
General requirements |
|
Section 111.97-3
|
Electric and hydraulic power supply |
|
Section 111.97-5
|
Distribution |
|
Section 111.97-7
|
Overcurrent protection |
|
Section 111.97-9
|
Applicability |
|
Section 111.99-1
|
Definitions |
|
Section 111.99-3
|
General |
|
Section 111.99-5
|
Applicability |
|
Section 111.101-1
|
General requirements |
|
Section 111.101-3
|
Power ventilation systems except machinery space ventilation systems |
|
Section 111.103-1
|
Machinery space ventilation |
|
Section 111.103-3
|
Ventilation stop stations |
|
Section 111.103-7
|
Machinery stop stations |
|
Section 111.103-9
|
Applicability; definition |
|
Section 111.105-1
|
General requirements |
|
Section 111.105-3
|
System integrity |
|
Section 111.105-5
|
Approved equipment |
|
Section 111.105-7
|
Explosion-proof and flameproof equipment |
|
Section 111.105-9
|
Intrinsically safe systems |
|
Section 111.105-11
|
Additional methods of protection |
|
Section 111.105-15
|
Wiring methods for hazardous locations |
|
Section 111.105-17
|
Switches |
|
Section 111.105-19
|
Ventilation |
|
Section 111.105-21
|
Belt drives |
|
Section 111.105-27
|
Combustible liquid cargo carriers |
|
Section 111.105-29
|
Flammable or combustible cargo with a flashpoint below 60 [deg]C (140 [deg]F), carriers of liquid-sulphur or inorganic |
|
Section 111.105-31
|
Bulk liquefied flammable gas and ammonia carriers |
|
Section 111.105-32
|
Mobile offshore drilling units |
|
Section 111.105-33
|
Vessels carrying coal |
|
Section 111.105-35
|
Flammable anesthetics |
|
Section 111.105-37
|
Additional requirements for vessels carrying vehicles with fuel in their tanks |
|
Section 111.105-39
|
Additional requirements for RO/RO vessels |
|
Section 111.105-40
|
Battery rooms |
|
Section 111.105-41
|
Paint stowage or mixing spaces |
|
Section 111.105-43
|
Vessels carrying agricultural products |
|
Section 111.105-45
|
Applicability |
|
Section 111.106-1
|
General requirements |
|
Section 111.106-3
|
Cable and wiring |
|
Section 111.106-5
|
Classification of adjacent spaces with access to hazardous locations |
|
Section 111.106-7
|
Classification of flammable or combustible cargo storage and handling locations |
|
Section 111.106-9
|
Classification of storage and handling locations of heated combustible liquid cargoes |
|
Section 111.106-11
|
Cargo handling devices or cargo pump rooms handling flammable or combustible cargoes |
|
Section 111.106-13
|
Ventilation of hazardous locations |
|
Section 111.106-15
|
Piping: electrical bonding |
|
Section 111.106-17
|
Industrial systems |
|
Section 111.107-1
|
Applicability |
|
Section 111.108-1
|
General requirements |
|
Section 111.108-3
|
Purpose |