|
Section 54.01-1
|
Adoption of division 1 of section VIII of the ASME Boiler and Pressure Vessel Code |
|
Section 54.01-2
|
Scope (modifies U-1 and U-2) |
|
Section 54.01-5
|
Steam-generating pressure vessels (modifies U-1(g)) |
|
Section 54.01-10
|
Exemptions from shop inspection and plan approval (modifiesU-1(c)(2)) |
|
Section 54.01-15
|
Pressure vessel for human occupancy (PVHO) |
|
Section 54.01-17
|
Plan approval |
|
Section 54.01-18
|
Miscellaneous pressure components (modifies UG-11) |
|
Section 54.01-25
|
Loadings (modifies UG-22) |
|
Section 54.01-30
|
Corrosion (modifies UG-25) |
|
Section 54.01-35
|
External pressure (modifies UG-28) |
|
Section 54.01-40
|
Scope |
|
Section 54.03-1
|
General |
|
Section 54.03-5
|
Scope (replaces UG-84) |
|
Section 54.05-1
|
Tests required |
|
Section 54.05-3
|
Toughness test specimens |
|
Section 54.05-5
|
Toughness test temperatures |
|
Section 54.05-6
|
Certification of material toughness tests |
|
Section 54.05-10
|
Weldment toughness tests--procedure qualifications |
|
Section 54.05-15
|
Production toughness testing |
|
Section 54.05-16
|
Weld toughness test acceptance criteria |
|
Section 54.05-17
|
Impact test properties for service of 0 [deg]F and below |
|
Section 54.05-20
|
Allowable stress values at low temperatures |
|
Section 54.05-30
|
Scope (modifies UG-90 through UG-103 and UG-115 through UG-120) |
|
Section 54.10-1
|
Marine inspectors (replaces UG-90 and UG-91, and modifies UG-92 through UG-103) |
|
Section 54.10-3
|
Maximum allowable working pressure (reproduces UG-98) |
|
Section 54.10-5
|
Standard hydrostatic test (modifies UG-99) |
|
Section 54.10-10
|
Pneumatic test (modifies UG-100) |
|
Section 54.10-15
|
Marking and stamping |
|
Section 54.10-20
|
Manufacturers' data report forms (modifies UG-120) |
|
Section 54.10-25
|
General (modifies UG-125 through UG-137) |
|
Section 54.15-1
|
Definitions (modifies appendix 3) |
|
Section 54.15-3
|
Protective devices (modifies UG-125) |
|
Section 54.15-5
|
Safety and relief valves (modifies UG-126) |
|
Section 54.15-10
|
Rupture disks (modifies UG-127) |
|
Section 54.15-13
|
Relief devices for unfired steam boilers, evaporators, and heat exchangers (modifies UG-126) |
|
Section 54.15-15
|
Minimum relief capacities for cargo tanks containing compressed or liquefied gas |
|
Section 54.15-25
|
Scope (modifies UW-1 through UW-65) |
|
Section 54.20-1
|
Fabrication for hazardous materials (replaces UW-2(a)) |
|
Section 54.20-2
|
Design (modifies UW-9, UW-11(a), UW-13, and UW-16) |
|
Section 54.20-3
|
Welding qualification tests and production testing (modifies UW-26, UW-28, UW-29, UW-47, and UW-48) |
|
Section 54.20-5
|
Scope (modifies UB-1) |
|
Section 54.23-1
|
Scope |
|
Section 54.25-1
|
Steel plates (modifies UCS-6) |
|
Section 54.25-3
|
Corrosion allowance |
|
Section 54.25-5
|
Requirement for postweld heat treatment (modifies UCS-56) |
|
Section 54.25-7
|
Radiography (modifies UW-11(a), UCS-57, UNF-57, UHA-33, and UHT-57) |
|
Section 54.25-8
|
Low temperature operation--ferritic steels (replaces UCS-65 through UCS-67) |
|
Section 54.25-10
|
Low temperature operation--high alloy steels (modifies UHA-23(b) and UHA-51) |
|
Section 54.25-15
|
Low temperature operation--ferritic steels with properties enhanced by heat treatment (modifies UHT-5(c), |
|
Section 54.25-20
|
Welding of quenched and tempered steels (modifies UHT-82) |
|
Section 54.25-25
|
Scope |
|
Section 54.30-1
|
Introduction |
|
Section 54.30-3
|
Limitations and requirements |
|
Section 54.30-5
|
Method of performing mechanical stress relief |
|
Section 54.30-10
|
Requirement for analysis and computation |
|
Section 54.30-15
|
Scope (replaces 100 |