(a) Sampling plan for selection of units for testing. (1) The requirements of Sec. 429.11 are applicable to conventional cooking tops, conventional ovens and microwave ovens; and
(1) The requirements of Sec. 429.11 are applicable to conventional cooking tops, conventional ovens and microwave ovens; and
(2) For each basic model of conventional cooking tops, conventional ovens and microwave ovens a sample of sufficient size shall be randomly selected and tested to ensure that--
(i) Any represented value of estimated annual operating cost, energy consumption, standby mode power consumption, off mode power consumption, or other measure of energy consumption of a basic model for which consumers would favor lower values shall be greater than or equal to the higher of:
(A) The mean of the sample, where:
[GRAPHIC] [TIFF OMITTED] TR07MR11.051
Or,
(B) The upper 97\1/2\ percent confidence limit (UCL) of the true mean divided by 1.05, where:[GRAPHIC] [TIFF OMITTED] TR02MY11.049 and
(ii) Any represented value of the energy factor, integrated energy factor, or other measure of energy consumption of a basic model for which consumers would favor higher values shall be less than or equal to the lower of:
(A) The mean of the sample, where:
[GRAPHIC] [TIFF OMITTED] TR07MR11.053
Or,
(B) The lower 97\1/2\ percent confidence limit (LCL) of the true mean divided by 0.95, where: [GRAPHIC] [TIFF OMITTED] TR02MY11.050
(b) Certification reports. (1) The requirements of Sec. 429.12 are applicable to conventional cooking tops, conventional ovens and microwave ovens; and
(1) The requirements of Sec. 429.12 are applicable to conventional cooking tops, conventional ovens and microwave ovens; and
(2) Pursuant to Sec. 429.12(b)(13), a certification report shall include the following public product-specific information: For conventional cooking tops and conventional ovens: the type of pilot light and a declaration that the manufacturer has incorporated the applicable design requirements. For microwave ovens, the average standby power in watts. [76 FR 12451, Mar. 7, 2011; 76 FR 24769, May 2, 2011, as amended at 77 FR 65977, Oct. 31, 2012; 78 FR 4025, Jan. 18, 2013; 78 FR 36368, June 17, 2013]