Each manufacturer of a product being manufactured under a type certificate must--
(a) Maintain at the place of manufacture all information and data specified in Sec. Sec. 21.31 and 21.41;
(b) Make each product and article thereof available for inspection by the FAA;
(c) Maintain records of the completion of all inspections and tests required by Sec. Sec. 21.127, 21.128, and 21.129 for at least 5 years for the products and articles thereof manufactured under the approval and at least 10 years for critical components identified under Sec. 45.15(c) of this chapter;
(d) Allow the FAA to make any inspection or test, including any inspection or test at a supplier facility, necessary to determine compliance with this subchapter;
(e) Mark the product in accordance with part 45 of this chapter, including any critical parts;
(f) Identify any portion of that product (e.g., sub-assemblies, component parts, or replacement articles) that leave the manufacturer's facility as FAA approved with the manufacturer's part number and name, trademark, symbol, or other FAA-approved manufacturer's identification; and
(g) Except as otherwise authorized by the FAA, obtain a production certificate for that product in accordance with subpart G of this part within 6 months after the date of issuance of the type certificate. [Doc. No. FAA-2006-25877, Amdt. 21-92, 74 FR 53387, Oct. 16, 2009] Sec. 21.125 [Reserved]