(a) Definitions. Unless the context indicates otherwise:
(1) Act means Pub. L. 97-446, enacted January 12, 1983 (19 U.S.C. 1202), 96 Stat. 2329, as amended at Pub. L. 103-465, enacted on December 8, 1994, 108 Stat. 4991, Public Law 108-429, enacted on 3 December 2004, 118 Stat. 2582.
(2) Secretaries means the Secretary of Commerce and the Secretary of Interior or their delegates, acting jointly.
(3) Director means the Director of the Statutory Import Programs Staff, International Trade Administration, U.S. Department of Commerce.
(4) Sale or tranfer of a business means the sale or transfer of control, whether temporary or permanent, over a firm to which a duty-exemption has been allocated, to any other firm, corporation, partnership, person or other legal entity by any means whatsoever, including, but not limited to, merger and transfer of stock, assets or voting trusts.
(5) New firm is a watch firm not affiliated through ownership or control with any other watch duty-refund recipient. In assessing whether persons or parties are affiliated, the Secretaries will consider the following factors, among others: stock ownership; corporate or family groupings; franchise or joint venture agreements; debt financing; and close supplier relationships. The Secretaries may not find that control exists on the basis of these factors unless the relationship has the potential to affect decisions concerning production, pricing, or cost. Also, no watch duty-refund recipient may own or control more than one jewelry duty-refund recipient. A new entrant is a new watch firm which has received an allocation.
(6) Producer means a duty-exemption holder which has maintained its eligibility for further allocations by complying with these regulations.
(7) Established industry means all producers, including new entrants, that have maintained their eligibility for further allocations.
(8) Territories, territorial, and insular possessions refer to the insular possessions of the United States (i.e., the U.S. Virgin Islands, Guam, and American Samoa and the Northern Mariana Islands).
(9) Duty-exemption refers to the authorization of duty-free entry of a specified number of watches and watch movements into the Customs Territory of the United States.
(10) Total annual duty-exemption refers to the entire quantity of watches or watch movements which may enter duty-free into the customs territory of the United States from the territories under 91/5 in a calendar year, as determined by the Secretaries or by the International Trade Commission in accordance with the Act.
(11) Territorial distribution refers to the apportionment by the Secretaries of the total annual duty-exemption among the separate territories; territorial share means the portion consigned to each territory by this apportionment.
(12) Allocation refers to the distribution of all parts of a territorial share, or a portion thereof, among the several producers in a territory.
(13) Creditable wages and associated, creditable fringe benefits and creditable duty differentials eligible for the duty refund benefit include, but are not limited to, the following:
(i) Wages up to an amount equal to 65 percent of the contribution and benefit base for Social Security, as defined in the Social Security Act for the year in which wages were earned, paid to permanent residents of the insular possessions employed in a firm's 91/5 watch and watch movement program.
(A) Wages paid for the repair of watches up to an amount equal to 85 percent of the firm's total creditable wages.
(B) Wages paid to watch and watch movement assembly workers involved in the complete assembly of watches and watch movements which have entered the United States duty-free and have complied with the laws and regulations governing the program.
(C) Wages paid to watch and watch movement assembly workers involved in the complete assembly of watches, excluding the movement, only in situations where the desired movement can not be purchased unassembled and the producer has documentation establishing this.
(D) Wages paid to those persons engaged in the day-to-day assembly operations on the premises of the company office, wages paid to administrative employees working on the premises of the company office, wages paid to security employees and wages paid to servicing and maintenance employees if these services are integral to the assembly and manufacturing operations and the employees are working on the premises of the company office.
(E) Wages paid to persons engaged in both creditable and non-creditable assembly and repair operations may be credited proportionally provided the firm maintains production, shipping and payroll records adequate for the Departments' verification of the creditable portion.
(F) Wages paid to new permanent residents who have met the requirements of permanent residency in accordance with the Departments' regulations, along with meeting all other creditable wage requirements of the regulations, which must be documented and verified to the satisfaction of the Secretaries.
(ii) The combined creditable amount of individual health and life insurance per year, for each full-time permanent resident employee who works on the premises of the company office and whose wages qualify as creditable, may not exceed 130 percent of the ``weighted average'' yearly federal employee health insurance, which is calculated from the individual health plans weighted by the number of individual contracts in each plan. The yearly amount is calculated by the Office of Personnel Management and includes the ``weighted average'' of all individual health insurance costs for federal employees throughout the United States. The maximum life insurance allowed within this combined amount is $50,000 for each employee. Only during the time employees are earning creditable wages are they entitled to health and life insurance duty refund benefits under the program.
(A) The combined creditable amount of family health and life insurance per year, for each full-time permanent resident employee who works on the premises of the company office and whose wages qualify as creditable, may not exceed 150 percent of the ``weighted average'' yearly federal employee health insurance, which is calculated from the family health plans weighted by the number of family contracts in each plan. The yearly amount is calculated by the Office of Personnel Management and includes the ``weighted average'' of all family health insurance costs for federal employees throughout the United States. The maximum life insurance allowed within this combined amount is $50,000 for each employee. Only during the time employees are earning creditable wages are they entitled to health and life insurance duty refund benefits under the program.
(B) The creditable pension benefit, for each full-time permanent resident employee who works on the premises of the company office and whose wages qualify as creditable, is up to 3 percent of the employee's wages unless the employee's wages exceed the maximum annual creditable wage allowed under the program (see paragraph (a)(13)(i) of this section). An employee earning more than the maximum creditable wage allowed under the program will be eligible for only 3 percent of the maximum creditable wage. Only during the time employees are earning creditable wages are they entitled to pension duty refund benefits under the program.
(iii) If tariffs on watches and watch movements are reduced, then companies would be required to provide the annual aggregate data by individual HTSUS watch tariff numbers for the following components contained therein: the quantity and value of watch cases, the quantity of movements, the quantity and value of each type of strap, bracelet or band, and the quantity and value of batteries shipped free of duty into the United States. If discrete watch movements are shipped free of duty into the United States, then the annual aggregate quantity by individual HTSUS movement tariff numbers would also be required along with the value of each battery if it is contained within. These data would be used to calculate the annual duty rate before each HTSUS tariff reduction, and the annual duty rate after the HTSUS tariff reduction. The amount of the difference would be creditable toward the duty refund. The tariff information would only be collected and used in the calculation of the annual duty-refund certificate and would not be used in the calculation of the mid-year duty-refund.
(14) Non-creditable wages and associated non-creditable fringe benefits ineligible for the duty refund benefit include, but are not limited to, the following:
(i) Wages over 65 percent of the contribution and benefit base for Social Security, as defined in the Social Security Act for the year in which wages were earned, paid to permanent residents of the territories employed in a firm's 91/5 watch and watch movement program.
(A) Wages paid for the repair of watches in an amount over 85 percent of the firm's total creditable wages.
(B) Wages paid for the assembly of watches and watch movements which are shipped outside the customs territory of the United States; wages paid for the assembly of watches and watch movements that do not meet the regulatory assembly requirements; or wages paid for the assembly of watches or watch movements that contain HTSUS column 2 components.
(C) Wages paid for the complete assembly of watches, excluding the movement, when the desired movement can be purchased unassembled, if the producer does not have adequate documentation, demonstrating to the satisfaction of the Secretaries, that the movement could not be purchased unassembled whether or not it is entering the United States.
(D) Wages paid to persons not engaged in the day-to-day assembly operations on the premises of the company office; wages paid to any outside consultants; wages paid to outside the office personnel, including but not limited to, lawyers, gardeners, construction workers, and accountants; wages paid to employees not working on the premises of the company office; and wages paid to employees who do not qualify as permanent residents in accordance with the Departments' regulations.
(E) Wages paid to persons engaged in both creditable and non-creditable assembly and repair operations if the producer does not maintain production, shipping and payroll records adequate for the Departments' verification of the creditable portion.
(ii) Any costs, for the year in which the wages were paid, of the combined creditable amount of individual health and life insurance for employees over 130 percent of the ``weighted average'' yearly individual health insurance costs for all federal employees. The cost of any life insurance over the $50,000 limit for each employee. Any health and life insurance costs during the time an employee is not earning creditable wages.
(A) Any costs, for the year in which the wages were paid, of the combined creditable amount of family health and life insurance for employees over 150 percent of the ``weighted average'' yearly family health insurance costs for all federal employee. The cost of any life insurance over the $50,000 limit for each employee. Any health and life insurance costs during the time an employee is not earning creditable wages.
(B) Any pension benefits that were not based on associated creditable wages. The cost of any pension benefit per employee over 3 percent of the employee's creditable wages unless the employee's wages exceed the maximum annual creditable annual maximum creditable wage allowed under the program (see paragraph (a)(13)(i) of this section). Employees earning over the maximum creditable wage allowed under the program would have a creditable annual pension benefit of up to 3 percent of the maximum creditable wage and wages over 3 percent of the maximum creditable wage would not be creditable.
(15) Non-91/5 watches and watch movements include, but are not limited to, watches and movements which are liquidated as dutiable by the Bureau of Customs and Border Protection but do not include, for purposes of the duty refund, watches that are completely assembled in the insular possessions, with the exception of a desired movement if the movement cannot be purchased in an unassembled condition; contains any material which is the product of any country with respect to which Column 2 rates of duty apply; are ineligible for duty-free treatment pursuant to law or regulation; or are units the assembly of which the Departments have determined not to involve substantial and meaningful work in the territories (as elsewhere defined in these regulations).
(16) Discrete movements and components means screws, parts, components and subassemblies not assembled together with another part, component or subassembly at the time of importation into the territory. (A mainplate containing set jewels or shock devices, together with other parts, would be considered a single discrete component, as would a barrel bridge subassembly.)
(17) Permanent resident means a person with one residence which is in the insular possessions or a person with one or more residences outside the insular possessions who meets criteria that include maintaining his or her domicile in the insular possessions, residing (i.e., be physically present for at least 183 days within a continuous 365 day period) and working in the territory at a program company, and maintaining his or her primary office for day-to-day work in the insular possessions.
(b) Forms--(1) ITA-334P ``Application for License to Enter Watches and Watch Movements into the Customs Territory of the United States.'' This form must be completed annually by all producers desiring to receive an annual allocation. It is also used, with appropriate special instructions for its completion, by new firms applying for duty-exemptions and by producers who wish to receive the duty refund in installments on a biannual basis.
(2) ITA-333 ``License to Enter Watches and Watch Movements into the Customs Territory of the United States.'' This form is issued by the Director to producers who have received an allocation and constitutes authorization for issuing specific shipment permits by the territorial governments. It is also used to record the balance of a producer's remaining duty-exemptions after each shipment permit is issued.
(3) ITA-340 ``Permit to Enter Watches and Watch Movements into the Customs Territory of the United States.'' This form may be obtained, by producers holding a valid license, from the territorial government or may be produced by the licensee in an approved computerized format or any other medium or format approved by the Departments of Commerce and the Interior. The completed form authorizes duty-free entry of a specified amount of watches or watch movements at a specified U.S. Customs port.
(4) ITA-360P ``Certificate of Entitlement to Secure the Refund of Duties on Articles that Entered the Customs Territory of The United State Duty Paid.'' This document authorizes an insular watch producer to request the refund of duties on imports of articles that entered the customs territory of the United States duty paid, up to the specified value of the certificate. Certificates may be used to obtain duty refunds only when presented with a properly executed Form ITA-361P.
(5) ITA-361P ``Request for Refund of Duties on Articles that Entered the Customs Territory of the United States Duty Paid.'' This form must be completed to obtain the refund of duties authorized by the Director through Form ITA- 360P. After authentication by the Department of Commerce, it may be used for the refund of duties on items which were entered into the customs territory of the United States duty paid during a specified time period. Copies of the appropriate Customs entries must be provided with this form to establish a basis for issuing the claimed amounts. The forms may also be used to transfer all or part of the producer's entitlement to another party. (See Sec. 303.12.) [49 FR 17740, Apr. 25, 1984, as amended at 50 FR 43568, Oct. 28, 1985; 53 FR 52994, Dec. 30, 1988; 56 FR 9621, Mar. 7, 1991; 61 FR 55884, 55885, Oct. 30, 1996; 65 FR 8049, Feb. 17, 2000; 66 FR 34812, July 2, 2001; 67 FR 77408, Dec. 18, 2002; 68 FR 56555, Oct. 1, 2003; 70 FR 67647, Nov. 8, 2005; 72 FR 16714, Apr. 5, 2007; 73 FR 62881, Oct. 22, 2008]