(a) General. Preferential treatment applies to any of the following articles, provided that the article in question is imported directly into the customs territory of the United States from an ATPDEA beneficiary country within the meaning of paragraph (b) of this section:
(1) Tuna that is harvested by United States vessels or ATPDEA beneficiary country vessels, that is prepared or preserved in any manner, in an ATPDEA beneficiary country, in foil or other flexible airtight containers weighing with their contents not more than 6.8 kilograms each; and
(2) Any of the following articles that the President has determined are not import-sensitive in the context of imports from ATPDEA beneficiary countries, provided that the article in question meets the country of origin and value content requirements set forth in paragraphs (c) and (d) of this section:
(i) Footwear not designated on December 4, 1991, as eligible articles for the purpose of the Generalized System of Preferences (GSP) under Title V, Trade Act of 1974, as amended (19 U.S.C. 2461 through 2467);
(ii) Petroleum, or any product derived from petroleum, provided for in headings 2709 and 2710 of the HTSUS;
(iii) Watches and watch parts (including cases, bracelets, and straps), of whatever type including, but not limited to, mechanical, quartz digital or quartz analog, if those watches or watch parts contain any material which is the product of any country with respect to which HTSUS column 2 rates of duty apply; and
(iv) Handbags, luggage, flat goods, work gloves, and leather wearing apparel that were not designated on August 5, 1983, as eligible articles for purposes of the GSP.
(b) Imported directly defined. For purposes of paragraph (a) of this section, the words ``imported directly'' mean:
(1) Direct shipment from any ATPDEA beneficiary country to the United States without passing through the territory of any country that is not an ATPDEA beneficiary country;
(2) If the shipment is from any ATPDEA beneficiary country to the United States through the territory of any country that is not an ATPDEA beneficiary country, the articles in the shipment do not enter into the commerce of any country that is not an ATPDEA beneficiary country while en route to the United States and the invoices, bills of lading, and other shipping documents show the United States as the final destination; or
(3) If the shipment is from any ATPDEA beneficiary country to the United States through the territory of any country that is not an ATPDEA beneficiary country, and the invoices and other documents do not show the United States as the final destination, the articles in the shipment upon arrival in the United States are imported directly only if they:
(i) Remained under the control of the customs authority of the intermediate country;
(ii) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the port director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the producer's sales agent; and
(iii) Were not subjected to operations other than loading or unloading, and other activities necessary to preserve the articles in good condition.
(c) Country of origin criteria--(1) General. Except as otherwise provided in paragraph (c)(2) of this section, an article described in paragraph (a)(2) of this section may be eligible for preferential treatment if the article is either:
(1) General. Except as otherwise provided in paragraph (c)(2) of this section, an article described in paragraph (a)(2) of this section may be eligible for preferential treatment if the article is either:
(i) Wholly the growth, product, or manufacture of an ATPDEA beneficiary country; or
(ii) A new or different article of commerce which has been grown, produced, or manufactured in an ATPDEA beneficiary country.
(2) Exceptions. No article will be eligible for preferential treatment by virtue of having merely undergone simple (as opposed to complex or meaningful) combining or packaging operations, or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the article. The principles and examples set forth in Sec. 10.195(a)(2) will apply equally for purposes of this paragraph.
(d) Value content requirement--(1) General. An article may be eligible for preferential treatment only if the sum of the cost or value of the materials produced in an ATPDEA beneficiary country or countries, plus the direct costs of processing operations performed in an ATPDEA beneficiary country or countries, is not less than 35 percent of the appraised value of the article at the time it is entered.
(1) General. An article may be eligible for preferential treatment only if the sum of the cost or value of the materials produced in an ATPDEA beneficiary country or countries, plus the direct costs of processing operations performed in an ATPDEA beneficiary country or countries, is not less than 35 percent of the appraised value of the article at the time it is entered.
(2) Commonwealth of Puerto Rico, U.S. Virgin Islands and CBI beneficiary countries. For the specific purpose of determining the percentage referred to in paragraph (d)(1) of this section, the term ``ATPDEA beneficiary country'' includes the Commonwealth of Puerto Rico, the U.S. Virgin Islands, and any CBI beneficiary country as defined in Sec. 10.191(b)(1). Any cost or value of materials or direct costs of processing operations attributable to the Virgin Islands or any CBI beneficiary country must be included in the article prior to its final exportation to the United States from an ATPDEA beneficiary country as defined in Sec. 10.252.
(3) Materials produced in the United States. For purposes of determining the percentage referred to in paragraph (d)(1) of this section, an amount not to exceed 15 percent of the appraised value of the article at the time it is entered may be attributed to the cost or value of materials produced in the customs territory of the United States (other than the Commonwealth of Puerto Rico). The principles set forth in paragraph (d)(4)(i) of this section will apply in determining whether a material is ``produced in the customs territory of the United States'' for purposes of this paragraph.
(4) Cost or value of materials--(i) ``Materials produced in an ATPDEA beneficiary country or countries'' defined. For purposes of paragraph (d)(1) of this section, the words ``materials produced in an ATPDEA beneficiary country or countries'' refer to those materials incorporated in an article which are either:
(i) ``Materials produced in an ATPDEA beneficiary country or countries'' defined. For purposes of paragraph (d)(1) of this section, the words ``materials produced in an ATPDEA beneficiary country or countries'' refer to those materials incorporated in an article which are either:
(A) Wholly the growth, product, or manufacture of an ATPDEA beneficiary country or two or more ATPDEA beneficiary countries; or
(B) Substantially transformed in any ATPDEA beneficiary country or two or more ATPDEA beneficiary countries into a new or different article of commerce which is then used in any ATPDEA beneficiary country as defined in Sec. 10.252 in the production or manufacture of a new or different article which is imported directly into the United States. For purposes of this paragraph (d)(4)(i)(B), no material will be considered to be substantially transformed into a new or different article of commerce by virtue of having merely undergone simple (as opposed to complex or meaningful) combining or packaging operations, or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the article. The examples set forth in Sec. 10.196(a), and the principles and examples set forth in Sec. 10.195(a)(2), will apply for purposes of the corresponding context under paragraph (d)(4)(i) of this section.
(ii) Failure to establish origin. If the importer fails to maintain adequate records to establish the origin of a material, that material may not be considered to have been grown, produced, or manufactured in an ATPDEA beneficiary country or in the customs territory of the United States for purposes of determining the percentage referred to in paragraph (d)(1) of this section.
(iii) Determination of cost or value of materials. (A) The cost or value of materials produced in an ATPDEA beneficiary country or countries or in the customs territory of the United States includes:
(1) The manufacturer's actual cost for the materials;
(2) When not included in the manufacturer's actual cost for the materials, the freight, insurance, packing, and all other costs incurred in transporting the materials to the manufacturer's plant;
(3) The actual cost of waste or spoilage, less the value of recoverable scrap; and
(4) Taxes and/or duties imposed on the materials by any ATPDEA beneficiary country or by the United States, provided they are not remitted upon exportation.
(B) Where a material is provided to the manufacturer without charge, or at less than fair market value, its cost or value will be determined by computing the sum of:
(1) All expenses incurred in the growth, production, or manufacture of the material, including general expenses;
(2) An amount for profit; and
(3) Freight, insurance, packing, and all other costs incurred in transporting the material to the manufacturer's plant.
(5) Direct costs of processing operations--(i) Items included. For purposes of paragraph (d)(1) of this section, the words ``direct costs of processing operations'' mean those costs either directly incurred in, or which can be reasonably allocated to, the growth, production, manufacture, or assembly of the specific merchandise under consideration. Those costs include, but are not limited to the following, to the extent that they are includable in the appraised value of the imported merchandise:
(i) Items included. For purposes of paragraph (d)(1) of this section, the words ``direct costs of processing operations'' mean those costs either directly incurred in, or which can be reasonably allocated to, the growth, production, manufacture, or assembly of the specific merchandise under consideration. Those costs include, but are not limited to the following, to the extent that they are includable in the appraised value of the imported merchandise:
(A) All actual labor costs involved in the growth, production, manufacture, or assembly of the specific merchandise, including fringe benefits, on-the-job training, and the cost of engineering, supervisory, quality control, and similar personnel;
(B) Dies, molds, tooling, and depreciation on machinery and equipment which are allocable to the specific merchandise;
(C) Research, development, design, engineering, and blueprint costs insofar as they are allocable to the specific merchandise; and
(D) Costs of inspecting and testing the specific merchandise.
(ii) Items not included. For purposes of paragraph (d)(1) of this section, the words ``direct costs of processing operations'' do not include items which are not directly attributable to the merchandise under consideration or are not costs of manufacturing the product. These include, but are not limited to:
(A) Profit; and
(B) General expenses of doing business which either are not allocable to the specific merchandise or are not related to the growth, production, manufacture, or assembly of the merchandise, such as administrative salaries, casualty and liability insurance, advertising, and salesmen's salaries, commissions, or expenses.
(6) Articles wholly the growth, product, or manufacture of an ATPDEA beneficiary country. Any article which is wholly the growth, product, or manufacture of an ATPDEA beneficiary country as defined in Sec. 10.252, and any article produced or manufactured in an ATPDEA beneficiary country as defined in Sec. 10.252 exclusively from materials which are wholly the growth, product, or manufacture of an ATPDEA beneficiary country or countries, will normally be presumed to meet the requirement set forth in paragraph (d)(1) of this section.