(a) Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions:
(1) The adhesive is prepared from one or more of the optional substances named in paragraph (c) of this section, subject to any prescribed limitations.
(2) The adhesive is either separated from the food by a functional barrier or used subject to the following additional limitations:
(i) In dry foods. The quantity of adhesive that contacts packaged dry food shall not exceed the limits of good manufacturing practice.
(ii) In fatty and aqueous foods. (a) The quantity of adhesive that contacts packaged fatty and aqueous foods shall not exceed the trace amount at seams and at the edge exposure between packaging laminates that may occur within the limits of good manufacturing practice.
(b) Under normal conditions of use the packaging seams or laminates will remain firmly bonded without visible separation.
(b) To assure safe usage of adhesives, the label of the finished adhesive container shall bear the statement ``food-packaging adhesive''.
(c) Subject to any limitation prescribed in this section and in any other regulation promulgated under section 409 of the Act which prescribes safe conditions of use for substances that may be employed as constituents of adhesives, the optional substances used in the formulation of adhesives may include the following:
(1) Substances generally recognized as safe for use in food or food packaging.
(2) Substances permitted for use in adhesives by prior sanction or approval and employed under the specific conditions of use prescribed by such sanction or approval.
(3) Flavoring substances permitted for use in food by regulations in this part, provided that such flavoring substances are volatilized from the adhesives during the packaging fabrication process.
(4) Color additives approved for use in food.
(5) Substances permitted for use in adhesives by other regulations in this subchapter and substances named in this subparagraph: Provided, however, That any substance named in this paragraph and covered by a specific regulation in this subchapter, must meet any specifications in such regulation. ------------------------------------------------------------------------
Substances Limitations------------------------------------------------------------------------Abietic acid...........................Acetone................................Acetone-formaldehyde condensate (CAS
Reg. No. 25619-09-4).Acetone-urea-formaldehyde resin........N-Acetyl ethanolamine..................Acetyl tributyl citrate................Acetyl triethyl citrate................2-Acrylamido-2-methyl-propanesulfonic
acid, homopolymer, sodium salt (CAS
Reg. No. 35641-59-9).Albumin, blood.........................(2-Alkenyl) succinic anhydrides in
which the alkenyl groups are derived
from olefins which contain not less
than 78 percent C30 and higher groups
(CAS Reg. No. 70983-55-0).4-[2-[2-2-(Alkoxy (C12-C15) ethoxy)
ethoxy]ethyl] disodium sulfosuccinate.1-Alkyl (C6-C18) amino-3-amino-propane
monoacetate.Alkylated (C4 and/or C8) phenols.......Alkyl (C7-C12) benzene.................Alkyl (C10-C20) dimethylbenzyl ammonium
chloride.n-Alkyl(C12, C14, C16, or C18) dimethyl For use as preservative only.
(ethylbenzyl) ammonium
cyclohexylsulfamate.Alkyl ketene dimers as described in
Sec. 176.120 of this chapter.Alkyl (C7-C12) naphthalene.............alpha Olefin sulfonate [alkyl group is
in the range of C10-C18 with not less
than 50 percent C14-C16], ammonium,
calcium, magnesium, potassium, and
sodium salts.2-[(2-aminoethyl)amino]ethanol (CAS
Reg. No. 111-41-1).3-Aminopropanediol..................... For use only in the preparation
of polyurethane resins.Aluminum...............................Aluminum acetate.......................Aluminum di(2-ethylhexoate)............Aluminum potassium silicate............N-[beta]-Aminoethyl-gamma-aminopropyl
trimethoxysilane.3-(Aminomethyl)-3,5,5-
trimethylcyclohexylamine.Aminomethylpropanol....................Ammonium benzoate...................... For use as preservative only.Ammonium bifluoride.................... For use only as bonding agent
for aluminum foil, stabilizer
or preservative. Total
fluoride from all sources not
to exceed 1 percent by weight
of the finished adhesive.Ammonium borate........................Ammonium citrate.......................Ammonium persulfate....................Ammonium polyacrylate..................Ammonium potassium hydrogen phosphate..Ammonium silico-fluoride............... For use only as bonding agent
for aluminum foil, stabilizer,
or preservative. Total
fluoride from all sources not
to exceed 1 percent by weight
of the finished adhesive.
Ammonium sulfamate.....................Ammonium thiocyanate...................Ammonium thiosulfate...................Amyl acetate...........................Anhydroenneaheptitol...................Animal glue as described in Sec.
178.3120 of this chapter.2-Anthraquinone sulfonic acid, sodium For use only as polymerization-
salt. control agent.Antimony oxide.........................Asbestos...............................Asphalt, paraffinic and naphthenic.....Azelaic acid...........................Azo-bis-isobutyronitrile...............Balata rubber..........................Barium acetate.........................Barium peroxide........................Barium sulfate.........................Bentonite..............................Benzene (benzol).......................1,4-Benzenedicarboxylic acid, bis[2- For use as a stabilizer.
(1,1-dimethylethyl)-6-[[3-(1,1-
dimethylethyl)-2-hydroxy-5-
methylphenyl]methyl]-4-methyl-
phenyl]ester (CAS Reg. No. 57569-40-1).1,2-Benzisothiazolin-3-one (CAS For use as preservative only.
Registry No. 2634-33-5).Benzothiazyldisulfide..................p-Benzoxyphenol........................ For use as preservative only.Benzoyl peroxide.......................Benzyl alcohol.........................Benzyl benzoate........................Benzyl bromoacetate.................... For use as preservative only.p-Benzyloxyphenol...................... Do.BHA (butylated hydroxyanisole).........BHT (butylated hydroxytoluene).........Bicyclo[2.2.1]hept-2-ene-6-methyl
acrylate.2-Biphenyl diphenyl phosphate..........Bis(benzoate-O)(2-propanolato)aluminum For use only as a reactant in
(CAS Reg. No. 105442-85-1). the preparation of polyester
resins.1,2-Bis(3,5-di-tert-butyl-4- For use at a level not to
hydroxyhydrocinnamoyl)hy-drazine (CAS exceed 2 percent by weight of
Reg. No. 32687-78-8). the adhesive.1,3-Bis(2-benzothiazolylmercaptomethyl)
urea.4,4'-Bis([alpha],[alpha]-
dimethylbenzyl)diphenylamine.2,6-Bis(1,1-dimethylethyl)-4-(1- For use as an antioxidant and/
methylpropyl)phenol (CAS Reg. No. or stabilizer only.
17540-75-9).2,6-Bis (1-methylheptadecyl)-p-cresol..4-[[4, 6-Bis(octylthio)6-
Bis(octylthio)6-Bis(octylthio)-s-
triazin-2-yl]amino]-2,6-di-tert-
butylphenol (CAS Reg. No. 991-84-4).Bis(tri-n-butyltin) oxide.............. For use as preservative only.Bis(trichloromethyl)sulfone C.A. Do.
Registry No. 3064-70-8.Borax..................................Boric acid.............................2-Bromo-2-nitro-1, 3-propanediol (CAS For use only as an
Reg. No. 52-51-7). antibacterial preservative.Butanedioic acid, sulfo-1,4-di-(C9-C11 For use as a surface active
alkyl) ester, ammonium salt (also agent in adhesives.
known as butanedioic acid, sulfo-1,4-
diisodecyl ester, ammonium salt [CAS
Reg. No. 144093-88-9])..1,3-Butanediol.........................1,4-Butanediol.........................1,4-Butanediol modified with adipic
acid.Butoxy polyethylene polyproplyene
glycol (molecular weight 900-4,200).Butyl acetate..........................Butyl acetyl ricinoleate...............Butyl alcohol..........................Butylated reaction product of p-cresol As identified in Sec.
and dicyclopentadiene. 178.2010(b) of this chapter.Butylated, styrenated cresols
identified in Sec. 178.2010(b) of
this chapter.Butyl benzoate.........................Butyl benzyl phthalate.................Butyldecyl phthalate................... ...............................1,3-Butylene glycoldiglycolic acid
copolymer.tert-Butyl hydroperoxide...............4,4'-Butylidenebis(6-tert-butyl-m-
cresol).Butyl lactate..........................Butyloctyl phthalate...................p-tert-Butylphenyl salicylate..........Butyl phthalate butyl glycolate........p-tert-Butylpyrocatechol............... For use only as polymerization-
control agent.Butyl ricinoleate......................Butyl rubber polymer...................
Butyl stearate.........................Butyl titanate, polymerized............Butyraldehyde..........................Calcium ethyl acetoacetate.............Calcium nitrate........................Calcium metasilicate...................Camphor................................Camphor fatty acid esters..............Candelilla wax.........................epsilon-Caprolactam-(ethylene-ethyl
acrylate) graft polymer.Carbon black, channel process..........Carbon disulfide-1,1'-
methylenedipiperidine reaction product.Carbon tetrachloride...................Carboxymethylcellulose.................Castor oil, polyoxyethylated (4-84
moles ethylene oxide).Cellulose acetate butyrate.............Cellulose acetate propionate...........Ceresin wax (ozocerite)................Cetyl alcohol..........................Chloracetamide.........................Chloral hydrate........................Chlorinated liquid n-paraffins with
chain lengths of C10-C17, containing
40-70 percent chlorine by weight.Chlorinated pyridine mixture with For use as preservative only.
active ingredients consisting of
2,3,5,6-tetrachloro-4-(methylsulfonyl)
pyridine, 2,3,5,6-tetrachloro-4-
(methylsulfinyl) pyridine and
pentachloropyridine.Chlorinated rubber polymer (natural
rubber polymer containing
approximately 67 percent chlorine).1-(3-Chloroallyl)-3,5,7-triaza-1- For use as preservative only.
azoniaadamantane chloride.Chlorobenzene..........................4-Chloro-3,5-dimethylphenol (p-chloro-m- For use as preservative only.
xylenol).4-Chloro-3-methylphenol................ Do.5-Chloro-2-methyl-4-isothiazolin-3-one For use only as an
(CAS Reg. No. 26172-55-4) and 2-methyl- antimicrobial agent in polymer
4-isothiazolin-3-one (CAS Reg. No. latex emulsions.
2682-20-4) mixture at a ratio of 3
parts to 1 part, manufactured from
methyl-3-mercaptopropionate (CAS Reg.
No. 2935-90-2). The mixture may
contain magnesium nitrate (CAS Reg.
No. 10377-60-3) at a concentration
equivalent to the isothiazolone active
ingredients (weight/weight).Chloroform.............................Chloroprene............................Chromium caseinate.....................Chromium nitrate.......................Chromium potassium sulfate.............Cobaltous acetate......................Coconut fatty acid amine salt of For use as preservative only.
tetrachlorophenol.Copal..................................Copper 8-quinolinolate................. For use as preservative only.Coumarone-indene resin.................Cresyl diphenyl phosphate..............Cumene hydroperoxide...................Cyanoguanidine.........................Cyclized rubber as identified in Sec.
176.170(b)(2) of this chapter.Cyclohexane............................1,4-Cyclohexanedimethanoldibenzoate
(CAS Reg. No. 35541-81-2).Cyclohexanol...........................Cyclohexanone resin....................Cyclohexanone-formaldehyde condensate..N-Cyclohexyl p-toluene sulfonamide.....([eta] \5\-Cyclopentadienyl)-([eta] \6\- For use only as a
isopropylbenzene)iron(II) photoinitiator.
hexafluorophosphate (CAS Reg. No.
32760-80-8).Damar..................................Defoaming agents as described in Sec.
176.210 of this chapter.Dehydroacetic acid..................... ...............................Diacetone alcohol......................Diacetyl peroxide......................N,N'-Dialkoyl-4,4'-
diaminodiphenylmethane mixtures where;
the alkoyl groups are derived from
marine fatty acids (C12-C24).2,5-Di-tert-amylhydroquinone...........Diamines derived from dimerized
vegetable oil acids.Diaryl-p-phenylenediamine, where the
aryl group may be phenyl, tolyl, or
xylyl.1,2-Dibromo-2,4-dicyanobutane (CAS For use as a preservative only.
Registry No. 3569-65-7).2,2-Dibromo-3-nitrilopropionamide (CAS For use as a preservative only.
Reg. No. 10222-01-2)..
Di(butoxyethyl) phthalate..............2,5-Di-tert-butylhydroquinone..........Dibutyl maleate........................2,6-Di-tert-butyl-4-methylphenol....... For use as preservative only.Di(C7, C9-alkyl)adipate................Dibutyl phthalate......................Dibutyl sebacate.......................Dibutyltin dilaurate for use only as a
catalyst for polyurethane resins.1,2-Dichloroethylene (mixed isomers)...Dicumyl peroxide.......................Dicyclohexyl phthalate.................Diethanolamine.........................Diethanolamine condensed with animal or
vegetable fatty acids.Diethylamine...........................Diethylene glycol......................Diethylene glycol adipic acid copolymerDiethylene glycol dibenzoate...........Diethylene glycol hydrogenated
tallowate monoester.Diethylene glycol laurate..............Diethylene glycol monobutyl ether......Diethylene glycol monobutyl ether
acetate.Diethylene glycol monoethyl ether......Diethylene glycol monoethyl ether
acetate.Diethylene glycol monomethyl ether.....Diethylene glycol monooleate...........Diethylene glycol monophenyl ether.....Diethylene glycol copolymer of adipic
acid and phthalic anhydride.Di(2-ethylhexyl) adipate...............Di(2-ethylhexyl)hexahydrophthalate.....Di(2-ethylhexyl)phthalate..............Diethyl oxalate........................Diethyl phthalate......................Dihexyl phthalate......................Dihydroabietylphthalate................Di(2-hydroxy-5-tert-butylphenyl)
sulfide.2,2'-Dihydroxy-5,5'-
dichlorodiphenylmethane
(dichlorophene).4,5-Dihydroxy-2-imidazolidinone........4-(Diiodomethylsulfonyl) toluene CA For use as an antifungal
Registry No.: 20018-09-01. preservative only.Diisobutyl adipate.....................Diisobutyl ketone......................Diisobutylphenoxyethoxyethyl dimethyl
benzyl ammonium chloride.Diisobutyl phthalate...................Diisodecyl adipate.....................Diisodecyl phthalate...................Diisooctyl phthalate...................Diisopropylbenzene hydroperoxide.......N,N-Dimethylcyclohexylamine
dibutyldithiocarbamate.Dimethyl formamide.....................Dimethyl hexynol.......................2,2-Dimethyl-1,3-propanediol dibenzoateDimethyl octynediol....................N-(1,1-dimethyl-3-oxobutyl) acrylamide.Dimethyl phthalate.....................3,5-Dimethyl-1,3,5,2H- For use as preservative only.
tetrahydrothiadiazine-2-thione.Di-[beta]-naphthyl-p-phenylenediamine..4,6-Dinonyl-o-cresol...................Dinonylphenol..........................Di-n-octyldecyl adipate................Dioctyldiphenylamine...................Dioctylphthalate.......................Dioctylsebacate........................Dioxane................................Dipentaerythritol pentastearate........Dipentamethylene-thiuram-tetrasulfide..Dipentene.............................. ...............................Dipentene resins.......................Dipentene-beta-pinene-styrene resins...Dipentene-styrene resin (CAS Registry
No. 64536-06-7).Diphenyl-2-ethylhexyl phosphate........Diphenyl, hydrogen ated................N,N'-Diphenyl-p-phenylenediamine.......Diphenyl phthalate.....................1,3-Diphenyl-2-thiourea................Dipropylene glycol.....................
Dipropylene glycol dibenzoate..........Dipropylene glycol monomethyl ether....Dipropylene glycol copolymer of adipic
acid and phthalic anhydride.Disodium cyanodithioimidocarbonate.....Disodium 4-isodecyl sulfosuccinate (CAS
Reg. No. 37294-49-8).N,N'-Distearoylethylenediamine.........Distearyl thiodipropionate.............3,5-Di-tert-butyl-4- For use as antioxidant only.
hydroxyhydrocinnamic acid triester
with 1,3,5-tris(2-hydroxyethyl)-s-
triazine-2,4,6(1H, 3H, 5H)-trione.4,4'-Dithiodimorpholine................n-Dodecylmercaptan.....................tert-Dodecylmercaptan..................Dodecylphenoxybenzene-disulfonic acid
and/or its calcium, magnesium, and
sodium salts.Elemi gum..............................Epichlorohydrin-4,4'-
isopropylidenediphenol resin.Epichlorohydrin-4,4'-sec-
butylidenediphenol resin.Epichlorohydrin-4,4'-isopropylidene-di-
o-cresol resin.Epichlorohydrin-phenolformaldehyde
resin.Erucamide (erucylamide)................Ethanolamine...........................Ethoxylated primary linear alcohols of
greater than 10 percent ethylene oxide
by weight having molecular weights of
390 to 7,000 (CAS Reg. No. 97953-22-5).Ethoxypropanol butyl ether.............Ethyl alcohol (ethanol)................5-Ethyl-1,3-diglycidyl-5-
methylhydantoin (CAS Reg. No. 15336-82-
0).Ethylene-acrylic acid-carbon monoxide
copolymer (CAS Reg. No. 97756-27-9).Ethylene-acrylic acid copolymer,
partial sodium salt containing no more
than 20 percent acrylic acid by
weight, and no more than 16 percent of
the acrylic acid as the sodium salt
(CAS Reg. No. 25750-82-7).Ethylenediamine........................Ethylenediaminetetra-acetic acid,
calcium, ferric, potassium, or sodium
salts, single or mixed.Ethylene dichloride....................Ethylene glycol........................Ethylene glycol monobutyl ether........Ethylene glycol monobutyl ether acetateEthylene glycol monoethyl ether........Ethylene glycol monoethyl ether acetateEthylene glycol monoethyl ether
ricinoleate.Ethylene glycol monomethyl ether.......Ethylene glycol monophenyl ether.......Ethylene-carbon monoxide copolymer (CAS
Reg. No. 25052-62-4) containing not
more than 30 weight percent of the
units derived from carbon monoxide.Ethylene-maleic anhydride copolymer,
ammonium or potassium salt.Ethylene-methacrylic acid copolymer
partial salts: Ammonium, calcium,
magnesium, sodium, and/or zinc.Ethylene-methacrylic acid-vinyl acetate
copolymer partial salts: Ammonium,
calcium, magnesium, sodium, and/or
zinc.Ethylene-octene-1 copolymers containing
not less than 70 weight percent
ethylene (CAS Reg. No. 26221-73-8).Ethylene-propylene-dicyclopentadiene
copolymer rubber.Ethylene, propylene, 1,4-hexadiene and
2,5-norbornadiene tetrapolymer.Ethylene-vinyl acetate carbon monoxide
terpolymer (CAS Registry No. 26337-35-
9) containing not more than 15 weight
percent of units derived from carbon
monoxide.2,2'-Ethylidenebis (4,6-di-tert-
butylphenol) (CAS Reg. No. 35958-30-6).Ethyl-p-hydroxybenzoate................ For use as preservative only.Ethyl hydroxyethylcellulose............Ethyl lactate..........................2,2'-Ethylidenebis(4,6-di-tert- For use as an antioxidant and/
butylphenyl)fluorophosphonite (CAS or stabilizer only.
Reg. No. 118337-09-0).Ethyl phthalyl ethyl glycolate.........Ethyl-p-toluene sulfonamide............ ...............................Fats and oils derived from animal or
vegetable sources, and the
hydrogenated, sulfated, or sulfonated
forms of such fats and oils.Fatty acids derived from animal or
vegetable fats and oils; and salts of
such acids, single or mixed, as
follows:
Aluminum.............................
Ammonium.............................
Calcium..............................
Magnesium............................
Potassium............................
Sodium...............................
Zinc.................................Ferric chloride........................Fluosilicic acid (hydrofluosilicic For use only as bonding agent
acid). for aluminum foil, stabilizer,
or preservative. Total
fluoride from all sources not
to exceed 1 percent by weight
of the finished adhesive.Formaldehyde...........................Formaldehyde o- and p-toluene
sulfonamide.Formamide..............................Fumaratochromium (III) nitrate.........Furfural...............................Furfuryl alcohol.......................Fumaric acid...........................gamma-Aminopropyltrimethoxysilane (CAS
Reg. No. 13822-56-5).Glutaraldehyde.........................Glycerides, di- and monoesters.........Glycerol polyoxypropylene triol, For use only in the preparation
minimum average molecular weight 250 of polyester and polyurethane
(CAS Reg. No. 25791-96-2). resins in adhesives.Glyceryl borate (glycol boriborate
resin).Glyceryl ester of damar, copal, elemi,
and sandarac.Glyceryl monobutyl ricinoleate.........Glyceryl monohydroxy stearate..........Glyceryl monohydroxy tallowate.........Glyceryl polyoxypropylene triol
(average molecular weight 1,000).Glyceryl tribenzoate...................Glycol diacetate.......................Glyoxal................................Heptane................................Hexamethylenetetramine.................Hexane.................................Hexanetriols...........................Hexylene glycol........................Hydroabietyl alcohol...................Hydrocarbon resins (produced by
polymerization of mixtures of mono-
and di-unsaturated hydrocarbons of the
aliphatic, alicyclic, and
monobenzenoid type derived both from
cracked petroleum and terpene stocks)
(CAS Reg. No. 68239-99-6).Hydrocarbon resins (produced by the
polymerization of styrene and alpha-
methyl styrene), hydrogenated (CAS
Reg. No. 68441-37-2).Hydrofluoric acid...................... For use only as bonding agent
for aluminum foil, stabilizer,
or preservative. Total
fluoride from all sources not
to exceed 1 percent by weight
of the finished adhesive.Hydrogen peroxide......................Hydrogenated dipentene resin (CAS Reg.
No. 106168-39-2).Hydrogenated dipentene-styrene
copolymer resin (CAS Reg. No. 106168-
36-9).Hydrogenated-beta-pinene-alpha-pinene-
dipentene copolymer resin (CAS Reg.
No. 106168-37-0).a-Hydro-omega-hydroxypoly- For use only in the preparation
(oxytetramethylene). of polyurethane resins.Hydroquinone...........................Hydroquinone monobenzyl ether..........Hydroquinone monoethyl ether...........2(2'-Hydroxy-3',5' di-tert-amylphenyl)
benzotriazole.Hydroxyacetic acid.....................7-Hydroxycoumarin......................Hydroxyethylcellulose..................2-Hydroxy-1-[4-(2-hydroxyethoxy)phenyl]- For use only as a
2-methyl-1-propanone(CAS Reg. No. photoinitiator at a level not
106797-53-9). to exceed 5 percent by weight
of the adhesive.1-(2-Hydroxyethyl)-1-(4-chlorobutyl)-2
alkyl (C6-C17) imidazolinium chloride.Hydroxyethyldiethylenetriamine.........[beta]-Hydroxyethyl pyridinium 2-
mercaptobenzothiazol.Hydroxyethyl starch....................Hydroxyethylurea....................... ...............................Hydroxylamine sulfate..................5-Hydroxymethoxymethyl-1-aza-3,7- For use only as an
dioxabicyclo[3.3.0]octane, 5- antibacterial preservative.
hydroxymethyl-1-aza-3,7-
dioxabicyclo[3.3.0]octane, and 5-
hydroxypoly-[methyleneoxy]methyl-1-aza-
3,7-dioxabicyclo[3.3.0] octane mixture.Hydroxypropyl methylcellulose..........
2-(Hydroxymethyl)-2-methyl-1,3-
propanediol tribenzoate.2-Imidazolidinone......................3-Iodo-2-propynyl-N-butyl carbamate For use only as an antifungal
(CAS Reg. No. 55406-53-6). preservative.Iodoform............................... For use only as polymerization-
control agent.Isoascorbic acid.......................Isobutyl alcohol (isobutanol)..........Isobutylene-isoprene copolymer.........Isodecyl benzoate (CAS Reg. No. 131298-
44-7).Isophorone.............................Isopropanolamine (mono-, di-, tri-)....Isopropyl acetate......................Isopropyl alcohol (isopropanol)........Isopropyl-m- and p-cresol (thymol
derived).4,4'-Isopropylidenediphenol............4,4'-Isopropylidenediphenol, For use as preservative only.
polybutylated mixture.Isopropyl peroxydicarbonate............p-Isopropoxy diphenylamine.............4,4'-Isopropylidene-bis(p-phenyleneoxy)-
di-2-propanol.Itaconic acid..........................Japan wax..............................Kerosene...............................Lauroyl peroxide.......................Lauroyl sulfate salts:
Ammonium.............................
Magnesium............................
Potassium............................
Sodium...............................Lauryl alcohol.........................Lauryl pyridinium 5-chloro-2-
mercaptobenzothiazole.Lignin calcium sulfonate...............Lignin sodium sulfonate................Linoleamide (linoleic acid amide)......Magnesium fluoride..................... For use only as bonding agent
for aluminum foil, stabilizer,
or preservative. Total
fluoride from all sources not
to exceed 1 percent by weight
of the finished adhesives.Magnesium glycerophosphate.............Maleic acid............................Maleic anhydride-diisobutylene
copolymer, ammonium or sodium salt.Manganese acetate......................Marine oil fatty acid soaps,
hydrogenated.Melamine...............................Melamine-formaldehyde copolymer........2-Mercaptobenzothiazole................2-Mercaptobenzothiazole and dimethyl For use as preservative only.
dithiocarbamic acid mixture, sodium
salt.2-Mercaptobenzothiazole, sodium or zinc For use as preservative only.
salt.Methacrylate-chromic chloride complex,
ethyl or methyl ester.p-Menthane hydroperoxide...............Methyl acetate.........................Methyl acetyl ricinoleate..............Methyl alcohol (methanol)..............Methylcellulose........................Methylene chloride.....................4,4'-Methylenebis(2,6-di-tert-
butylphenol).2,2-Methylenebis (4-ethyl-6-tert-
butylphenol).2,2-Methylenebis (4-methyl-6-
nonylphenol).2,2-Methylenebis (4-methyl-6-tert-
butylphenol).Methyl ethyl ketone....................Methyl ethyl ketone-formaldehyde
condensate.2-Methylhexane.........................1-Methyl-2-hydroxy-4-isopropyl benzene.Methyl isobutyl ketone.................Methyl oleate..........................Methyl oleate-palmitate mixture........Methyl phthalyl ethyl glycolate........Methyl ricinoleate.....................Methyl salicylate......................a-Methylstyrene-vinyltoluene copolymer ...............................
resins (molar ratio 1 a methylstyrene
to 3 vinyltoluene).Methyl tallowate.......................Mineral oil............................Monochloracetic acid...................Monooctyldiphenylamine.................
Montan wax.............................Morpholine.............................Myristic acid-chromic chloride complex.Myristyl alcohol.......................Naphtha................................Naphthalene, monosulfonated............Naphthalene sulfonic acid-formaldehyde
condensate, sodium salt.[alpha]-Naphthylamine..................[alpha],[alpha]',[alpha]'',[alpha]'''-
Neopentane tetrayltetrakis [omega-
hydroxypoly (oxypropylene) (1-2
moles)], average molecular weight 400.Nitric acid............................-Nitrobiphenyl................Nitrocellulose.........................2-Nitropropane.........................[alpha]-(p-Nonylphenyl)-omega-
hydroxypoly (oxyethylene) mixture of
dihydrogen phosphate and monohydrogen
phosphate esters; the nonyl group is a
propylene trimer isomer and the poly
(oxyethylene) content averages 6-9
moles or 50 moles.[alpha](p-Nonylphenyl)-omega-
hydroxypoly (oxyethylene) produced by
the condensation of 1 mole of p-
nonylphenol (nonyl group is a
propylene trimer isomer) with an
average of 1-40 moles of ethylene
oxide.[alpha]-(p-Nonylphenyl)-omega-
hydroxypoly (oxyethylene) sulfate,
ammonium salt: the nonyl group is a
propylene trimer isomer and the poly
(oxyethylene) content averages 9 or 30
moles.endo-cis-5-Norbornene-2,3-dicarboxylic
anhydride.[alpha]-cis-9-Octadecenyl-omega-
hydroxypoly (oxyethylene); the
octadecenyl group is derived from
oleyl alcohol and the poly
(oxyethylene) content averages 20
moles.Octadecyl 3,5-di-tert-butyl-4-
hydroxyhydrocinnamate.Octyl alcohol..........................Octyldecyl phthalate...................Octylphenol............................Octylphenoxyethanols...................Octylphenoxypolyethoxy-
polypropoxyethanol (13 moles of
ethylene oxide and propylene oxide).Odorless light petroleum hydrocarbons..Oleamide (oleic acid amide)............Oleic acid, sulfated...................2,2'-Oxamidobis[ethyl 3-(3,5-di-tert-
butyl-4-hydroxyphenyl)propionate] (CAS
Reg. No. 70331-94-1).Oxazoline..............................[alpha]-(oxiranylmethyl)-[omega]- For use as a reactant in the
(oxiranylmethoxy)poly[oxy(methyl-1,2- preparation of epoxy-based
ethanediyl)], (alternative name: resins.
epichlorohydrin-polypropylene glycol)
(CAS Reg. No. 26142-30-3).2,2'-[oxybis[(methyl-2,1-ethanediyl)- For use as a reactant in the
oxymethylene]]bisoxirane, (alternative preparation of epoxy-based
name: epichlorohydrin-dipropylene resins.
glycol) (CAS Reg. No. 41638-13-5).n-Oxydiethylene-benzothiazole..........Palmitamide (palmitic acid amide)......Paraffin (C12-C20) sulfonate...........Paraformaldehyde.......................Pentachlorophenol......................Pentaerythritol ester of maleic
anhydride.Pentaerythritol monostearate........... For use as preservative only.Pentaerythritol tetrabenzoate [CAS
Registry No. 4196-86-5].Pentaerythritol tetrastearate..........2,4-Pentanedione.......................Pentasodium
diethylenetriaminepentaacetate (CAS
Reg. No. 140-01-2).Perchloroethylene......................Petrolatum.............................Petroleum hydrocarbon resin
(cyclopentadiene type), hydrogenated.Petroleum hydrocarbon resin (produced
by the catalytic polymerization and
subsequent hydrogenation of styrene,
vinyltoluene, and indene types from
distillates of cracked petroleum
stocks).Petroleum hydrocarbon resins (produced
by the homo-and copolymerization of
dienes and olefins of the aliphatic,
alicyclic, and monobenzenoid
arylalkene types from distillates of
cracked petroleum stocks).Phenol................................. For use as preservative only.Phenol-coumarone-indene resin..........Phenolic resins as described in Sec.
175.300(b)(3)(vi).Phenothiazine.......................... For use only as polymerization-
control agent.Phenyl-[beta]-naphthylamine (free of
[beta]-naphthylamine).o-Phenylphenol......................... For use as preservative only.
o-Phthalic acid........................Pimaric acid........................... ...............................Pine oil...............................Piperazine.............................Piperidinium
pentamethylenedithiocarbamate.Poly(acrylamide-[2-acrylamide-2-
methylpropylsulfonate]-
dimethylidiallyl ammonium chloride)
sodium salt (CAS Reg. No. 72275-68-4).Polyamides derived from reaction of one
or more of the following acids with
one or more of the following amines:
Acids:
Azelaic acid...................
Dimerized vegetable oil acids..
Amines:
Bis(hexamethylene) triamine and
higher homologues.
Diethylenetriamine.............
Diphenylamine..................
Ethylenediamine................
Hexamethylenediamine...........
Poly(oxypropylene)diamine
(weight average molecular
weight 2010) (CAS Reg. No.
9046-10-0).
Poly(oxypropylene)diamine
(weight average molecular
weight 440) (CAS Reg. No. 9046-
10-0).
Tetraethylenepentamine.........
Triethylenetetramine...........Polybutene, hydrogenated...............Polybutylene glycol (molecular weight
1,000).Poly [2(diethylamino) ethyl
methacrylate] phosphate.Polyester of adipic acid, phthalic
acid, and propylene glycol, terminated
with butyl alcohol.Polyester of diglycolic acid and
propylene glycol containing ethylene
glycol monobutyl ether as a chain
stopper.Polyester resins (including alkyd
type), as the basic polymer, formed as
esters when one or more of the
following acids are made to react with
one or more of the following alcohols:
Acids:
Azelaic acid...................
Dimethyl 1,4-
cyclohexanedicarboxylate (CAS
Reg. No. 94-60-0).
Dimethyl-5-sulfoisophthalic
acid (CAS Reg. No. 50975-82-1)
and/or its sodium salt (CAS
Reg. No. 3965-55-7).
Polybasic and monobasic acids
identified in Sec.
175.300(b)(3)(vii)(a) and (b).
5-sulfo-1,3-benzenedicarboxylic
acid, monosodium salt (CAS
Reg. No. 6362-79-4).
Tetrahydrophthalic acid........
Alcohols:
1,4-Cyclohexanedimethanol......
2,2-Dimethyl-1,3-propanediol...
1,6-Hexanediol (CAS Reg. No.
629-11-8).
Polyhydric and monohydric
alcohols identified in Sec.
175.300(b)(3)(vii)(c) and (d).Polyethyleneadipate modified with For use only in the preparation
ethanolamine with the molar ratio of of polyurethan resins.
the amine to the adipic acid less than
0.1 to 1.Polyethylene glycol (molecular weight
200-6,000).Polyethylene glycol mono-isotridecyl
ether sulfate, sodium salt (CAS Reg.
No. 150413-26-6).Polyethyleneglycol alkyl(C10-C12)ether ...............................
sulfosuccinate, disodium salt (CAS
Reg. No. 68954-91-6).Polyethylene, oxidized.................Polyethylene resins, carboxyl modified,
identified in Sec. 177.1600 of this
chapter.Polyethylenimine.......................Polyethylenimine-epichlorohydrin resinsPoly(ethyloxazoline) (CAS Reg. No.
25805-17-8).Polyisoprene...........................Polymeric esters of polyhydric alcohols
and polycarboxylic acids prepared from
glycerin and phthalic anhydride and
modified with benzoic acid, castor
oil, coconut oil, linseed oil, rosin,
soybean oil, styrene, and vinyl
toluene.Polymers: Homopolymers and copolymers
of the following monomers:.
Acrylamide...........................
Acrylic acid.........................
Acrylonitrile........................
Allylmethacrylate (CAS Reg. No. 00096-
05-09).
Butadiene............................
Butene...............................
N-tert-Butylacrylamide...............
Butyl acrylate.......................
1,3-Butylene glycol dimethacrylate...
Butyl methacrylate...................
Crotonic acid........................
Decyl acrylate.......................
Diallyl fumarate.....................
Diallyl maleate......................
Diallyl phthalate....................
Dibutyl fumarate.....................
Dibutyl itaconate....................
Dibutyl maleate......................
Di(2-ethylhexyl) maleate.............
Dimethyl-[alpha]-methylstyrene.......
Dioctyl fumarate.....................
Dioctyl maleate......................
Divinylbenzene.......................
Ethyl acrylate.......................
Ethylene.............................
Ethylene cyanohydrin.................
2-Ethylhexyl acrylate................
Ethyl methacrylate...................
Fatty acids, C10-13-branched, vinyl
esters (CAS Reg. No. 184785-38-4).
Fumaric acid and/or its methyl,
ethyl, propyl, butyl, amyl hexyl,
heptyl and octyl esters.
Glycidyl methacrylate................
1-Hexene (CAS Reg. No. 592-41-6).....
2-Hydroxyethyl acrylate..............
2-Hydroxyethyl methacrylate..........
2-Hydroxypropyl methacrylate.........
Isobutyl acrylate....................
Isobutylene..........................
Itaconic acid........................
Maleic acid, diester with 2-
hydroxyethanesulfonic acid, sodium
salt.
Maleic anhydride.....................
Methacrylic acid.....................
Methyl acrylate......................
N,N'-Methylenebisacrylamide..........
Methyl methacrylate..................
N-Methylolacrylamide.................
Methyl styrene.......................
-Methyl styrene......................
Monoethyl maleate....................
Monomethyl maleate...................
Mono (2-ethylhexyl) maleate..........
5-Norbornene-2 3-dicarboxylic acid,
mono-n-butyl ester.
1-Octene (CAS Reg. No. 111-66-0).....
Propyl acrylate......................
Propylene............................
Styrene..............................
Triallyl cyanurate...................
Vinyl acetate........................
Vinyl alcohol (from alcoholysis or
hydrolysis of vinyl acetate units).
Vinyl butyrate.......................
Vinyl chloride.......................
Vinyl crotonate......................
Vinyl ethyl ether....................
Vinyl hexoate........................
Vinylidene chloride..................
Vinyl methyl ether...................
Vinyl pelargonate....................
Vinyl propionate.....................
Vinyl pyrrolidone....................
Vinyl stearate.......................Polyoxyalkylated-phenolic resin
(phenolic resin obtained from
formaldehyde plus butyl- and/or
amylphenols, oxyalkylated with
ethylene oxide and/or propylene oxide).Poly(oxycaproyl) diols and triols
(minimum molecular weight 500).Polyoxyethylated (40 moles) tallow
alcohol sulfate, sodium salt.Polyoxyethylene (20 mol)--anhydrous
lanolin adduct.
Polyoxyethylene (molecular weight 200)
dibenzoate.Polyoxyethylene (molecular weight 200-
600) esters of fatty acids derived
from animal or vegetable fats and oils
(including tall oil).Polyoxyethylene (15 moles) ester of
rosin.Polyoxyethylene (4-5 moles) ether of
phenol.Polyoxyethylene (25 moles)--glycerol
adduct.Polyoxyethylene (40 moles) stearate....Polyoxyethylene (5-15 moles) tridecyl
alcohol.Polyoxypropylene (3 moles) tridecyl
alcohol sulfate.Polyoxypropylene (20 moles) butyl etherPolyoxypropylene (40 moles) butyl etherPolyoxypropylene (20 moles) oleate
butyl ether.Polyoxypropylene-polyoxyethylene
condensate (minimum molecular weight
1,900).Polypropylene glycol (minimum molecular
weight 150).Polypropylene glycol (3-4 moles)
triether with 2-ethyl-2-
(hydroxymethyl)-1,3-propane-diol,
average molecular weight 730.Polypropylene glycol dibenzoate (CAS For use as a plasticizer at
Reg. No. 72245-46-6). levels not to exceed 20
percent by weight of the
finished adhesive.Polypropylene, noncrystalline..........Polysiloxanes:
Diethyl polysiloxane.................
Dihydrogen polysiloxane..............
Dimethyl polysiloxane................
Diphenyl polysiloxane................
Ethyl hydrogen polysiloxane..........
Ethyl phenyl polysiloxane............
Methyl ethyl polysiloxane............
Methyl hydrogen polysiloxane.........
Methyl phenyl polysiloxane...........
Phenyl hydrogen polysiloxane.........Polysorbate 60.........................Polysorbate 80.........................Polysorbate 20 (polyoxyethylene (20)
sorbitan monolaurate).Polysorbate 40 (polyoxyethylene (20)
sorbitan monopalmitate).Poly[styrene-co-disodium maleate-co-
[alpha]-(p-nonyl-phenyl)-omega-(p-
vinyl-benzyl)poly(oxyethylene)]
terpolymer.Polytetrafluoroethylene................Polyurethane resins produced by: (1)
reacting diisocyanates with one or
more of the polyols or polyesters
named in this paragraph, or (2)
reacting the chloroformate derivatives
of one or more of the polyols or
polyesters named in this paragraph
with one or more of the polyamines
named in this paragraph, or (3)
reacting toluene diisocyanate or 4,4'
methylenebis(cyclohexylisocyanate)
(CAS Reg. No. 5124-30-1) with: (i) one
or more of the polyols or polyesters
named in this paragraph and with
either N-methyldiethanolamine (CAS
Reg. No. 105-59-9) and dimethyl
sulfate (CAS Reg. No. 77-78-1) or
dimethylolpropionic acid (CAS Reg. No.
4767-03-7) and triethylamine (CAS Reg.
No. 121-44-8), or (ii) a fumaric acid-
modified polypropylene glycol or
fumaric acid-modified tripropylene
glycol), triethylamine (CAS Reg. No.
107-15-3), and ethylenediamine (CAS
Reg. No. 121-44-8), or (4) reacting
meta-tetramethylxylene diisocyanate
(CAS Reg. No. 2778-42-9) with one or
more of the polyols and polyesters
listed in this paragraph and with
dimethylolpropionic acid (CAS Reg. No.
4767-03-7) and triethylamine (CAS Reg.
No. 121-44-8), N-methyldiethanolamine
(CAS Reg. No. 105-59-9), 2-
dimethylaminoethanol (CAS Reg. No. 108-
01-0), 2-dimethylamino-2-methyl-1-
propanol (CAS Reg. No. 7005-47-2), and/
or 2-amino-2-methyl-1-propanol (CAS
Reg. No. 124-68-5).Polyvinyl alcohol modified so as to
contain not more than 3 weight percent
of comonomer units derived from 1-
alkenes having 12 to 20 carbon atoms.Polyvinyl butyral......................Polyvinyl formal.......................Potassium ferricyanide................. For use only as polymerization-
control agent.Potassium N-methyldithiocarbamate......Potassium pentachlorophenate........... For use as preservative only.Potassium permanganate.................Potassium persulfate...................Potassium phosphates (mono-, di-,
tribasic).Potassium tripolyphosphate.............[alpha], [alpha]', [alpha]''-1,2,3-
Propanetriyltris [omega-(2,3-
epoxypropoxy) poly (oxypropylene) (24
moles)].[beta]-Propiolactone...................
Propyl alcohol (propanol)..............Propylene carbonate....................Propylene glycol and p-p'-
isopropylidenediphenol diether.Propylene glycol dibenzoate (CAS Reg. For use as a plasticizer at
No. 19224-26-1). levels not to exceed 20
percent by weight of the
finished adhesive.Propylene glycol esters of coconut
fatty acids.Propylene glycol monolaurate...........Propylene glycol monomethyl ether......Propylene glycol monostearate..........[alpha], [alpha]', [alpha]''-
[Propylidynetris (methylene)] tris
[omega-hydroxypoly (oxypropylene) (1.5
moles minimum)], minimum molecular
weight 400.Quaternary ammonium chloride For use as preservative only.
(hexadecyl, octadecyl derivative).Rosin (wood, gum, and tall oil rosin),
rosin dimers, decarboxylated rosin
(including rosin oil,
disproportionated rosin, and these
substances as modified by one or more
of the following reactants:.
Alkyl (C1-C9) phenolformaldehyde.....
Ammonia..............................
Ammonium caseinate-p-
Cyclohexylphenolformaldehyde.
Diethylene glycol....................
Dipentaerythritol....................
Ethylene glycol......................
Formaldehyde.........................
Fumaric acid.........................
Glycerin.............................
Hydrogen.............................
Isophthalic acid.....................
4,4'-Isopropylidenediphenol-
epichlorohydrin (epoxy).
4,4'-Isopropylidenediphenol-
formaldehyde.
Maleic anhydride.....................
Methyl alcohol.......................
Pentaerythritol......................
Phthalic anhydride...................
Polyethylene glycol..................
Phenol-formaldehyde..................
Phenyl [mu]-cresol-formaldehyde......
p-Phenylphenol-formaldehyde..........
Sulfuric acid........................
Triethylene glycol...................
Xylenol-formaldehyde.................Rosin salts (salts of wood, gum, and
tall oil rosin, and the dimers
thereof, decarboxylated rosin
disproportionated rosin, hydrogenated
rosin):
Aluminum.............................
Ammonium.............................
Calcium..............................
Magnesium............................
Potassium............................
Sodium...............................
Zinc.................................Rosin, gasoline-insoluble fraction.....Rubber hydrochloride polymer...........Rubber latex, natural..................Salicylic acid......................... For use as preservative only.Sandarac...............................Sebacic acid...........................Shellac................................Silicon dioxide as defined in Sec.
172.480(a) of this chapter.Sodium alkyl (C2-C13.5 aliphatic)
benezenesulfonate.Sodium aluminum pyrophosphate..........Sodium aluminum sulfate................Sodium bisulfate.......................Sodium calcium silicate................Sodium capryl polyphosphate............Sodium carboxymethylcellulose..........Sodium chlorate........................Sodium chlorite........................Sodium chromate........................Sodium decylsulfate....................Sodium dehydroacetate.................. For use as preservative only.Sodium di-(2-ethylhexoate).............Sodium di-(2-ethylhexyl) pyrophosphate.Sodium dihexylsulfosuccinate...........Sodium dissobutylphenoxydiethoxyethyl
sulfonate.Sodium diisobutylphenoxymonoethoxyethyl
sulfonate.Sodium diisopropyl- and
triisopropylnaphthalenesulfonate.
Sodium dimethyldithiocarbamate.........Sodium dioctylsulfosuccinate...........Sodium n-dodecylpolyethoxy (50 moles)
sulfate.Sodium ethylene ether of nonylphenol
sulfate.Sodium 2-ethylhexyl sulfate............Sodium fluoride........................ For use only as bonding agent
for aluminum foil, stabilizer,
or preservative. Total
fluoride for all sources not
to exceed 1 percent by weight
of the finished adhesive.Sodium formaldehyde sulfoxylate........Sodium formate.........................Sodium heptadecylsulfate...............Sodium hypochlorite....................Sodium isododecylphenoxypolyethoxy (40
moles) sulfate.Sodium N-lauroyl sarcosinate...........Sodium metaborate......................Sodium [alpha]-naphthalene sulfonate...Sodium nitrate.........................Sodium nitrite.........................Sodium oleoyl isopropanolamide
sulfosuccinate.Sodium pentachlorophenate.............. For use as preservative only.Sodium perborate.......................Sodium persulfate......................Sodium [mu]-phenylphenate.............. For use as preservative only.Sodium polyacrylate....................Sodium polymethacrylate................Sodium polystyrene sulfonate...........Sodium salicylate...................... For use as preservative only.Sodium salt of 1-hydroxy 2(1H)-pyridine Do.
thione.Sodium tetradecylsulfate...............Sodium thiocyanate.....................Sodium bis-tridecylsulfosuccinate......Sodium xylene sulfonate................Sorbitan monooleate....................Sorbitan monostearate..................Soybean oil, epoxidized................Spermaceti wax.........................Sperm oil wax..........................Stannous 2-ethylhexanoate.............. For use only as a catalyst for
polyurethane resins.Stannous stearate......................Starch hydrolysates....................Starch or starch modified by one or
more of the treatments described in
Secs. 172.892 and 178.3520 of this
chapter.Starch, reacted with a urea-
formaldehyde resin.Starch, reacted with formaldehyde......Stearamide (stearic acid amide)........Stearic acid...........................Stearic acid-chromic chloride complex..Stearyl-cetyl alcohol, technical grade,
approximately 65 percent-80 percent
stearyl and 20 percent-35 percent
cetyl.Strontium salicylate...................Styrenated phenol......................Styrene block polymers with 1,3-
butadiene.Styrene-maleic anhydride copolymer,
ammonium or potassium salt.Styrene-maleic anhydride copolymer
(partially methylated) sodium salt.Styrene-methacrylic acid copolymer,
potassium salt.Sucrose acetate isobutyrate............Sucrose benzoate.......................Sucrose octaacetate....................2-sulfoethyl methacrylate (CAS Registry For use at levels not to exceed
No. 10595-80-9). 2 percent by weight of the dry
adhesive.[alpha]-Sulfo-omega-(dodecyloxy)poly
(oxyethylene), ammonium salt.Sulfonated octadecylene (sodium form)..Sulfosuccinic acid 4-ester with
polyethylene glycol dodecyl ether
disodium salt (alcohol moiety produced
by condensation of 1 mole of n-dodecyl
alcohol and an average of 5-6 moles of
ethylene oxide, Chemical Abstracts
Service Registry No. 039354-45-5).Sulfosuccinic acid 4-ester with
polyethylene glycol nonylphenyl ether,
disodium salt (alcohol moiety produced
by condensation of 1 mole of
nonylphenol and an average of 9-10
moles of ethylene oxide) (CAS Reg. No.
9040-38-4).Sulfur.................................Synthetic primary linear aliphatic
alcohols whose weight average
molecular weight is greater than 400
(CAS Reg. No. 71750-71-5).
Synthetic wax polymer as described in
Sec. 176.170(a)(5) of this chapter.Tall oil...............................Tall oil fatty acids, linoleic and
oleic.Tall oil fatty acid methyl ester.......Tall oil, methyl ester.................Tall oil pitch.........................Tall oil soaps.........................Tallow alcohol (hydrogenated)..........Tallow amine, secondary (hexadecyl,
octadecyl), of hard tallow.Tallow, blown (oxidized)...............Tallow, propylene glycol ester.........Terpene resins ([alpha]-and [beta]- ...............................
pinene) homopolymers, copolymers, and
condensates with phenol, formaldehyde,
coumarone, and/or indene.Terphenyl..............................Terphenyl, hydrogenated................Terpineol..............................Tetraethylene pentamine................Tetraethylthiuram disulfide............Tetrahydrofuran........................Tetrahydrofurfuryl alcohol.............Tetra-isopropyl titanate...............Tetrakis[methylene (3,5-di-tert-butyl-4-
hydroxy-hydro-cinnamate)] methane.a[p-(1,1,3,3-Tetramethylbutyl) phenyl]-
omega-hydroxypoly-(oxyethylene)
produced by the condensation of 1 mole
of p-(1,1,3,3-tetramethylbutyl) phenol
with an average of 1-40 moles of
ethylene oxide.a-[p-(1,1,3,3-Tetramethylbutyl) phenyl]-
omega-hydroxy-poly(oxyethylene)
mixture of dihydrogen phosphate and
monohydrogen phosphate esters and
their sodium, potassium, and ammonium
salts having a poly(oxyethylene)
content averaging 6-9 or 40 moles.Tetramethyl decanediol.................Tetramethyl decynediol.................Tetramethyl decynediol plus 1-30 moles
of ethylene oxide.Tetramethylthiuram monosulfide.........Tetrasodium N-(1,2-dicarboxyethyl)N-
octadecylsulfosuccinamate.4,4'-Thiobis-6-tert-butyl-m-cresol.....Thiodiethylene-bis(3,5-di-tert-butyl-4-
hydroxyhydrocinnamate).2,2'-(2,5-Thiophenediyl) bis[5-tert-
butylbenzoxazole].Thiram.................................Thymol................................. For use as preservative only.Titanium dioxide.......................Titanium dioxide-barium sulfate........Titanium dioxide-calcium sulfate.......Titanium dioxide-magnesium silicate....Toluene................................Toluene 2,4-diisocyanate...............Toluene 2,6-diisocyanate...............o- and p-Toluene ethyl sulfonamide.....o- and p-Toluene sulfonamide...........p-Toluene sulfonic acid................p-(p'-Toluene-sulfonylamide)-
diphenylamide.Triazine-formaldehyde resins as
described in Sec. 175.300(b)(3)(xiii).Tributoxyethyl phosphate...............Tributylcitrate........................Tri-tert-butyl-p-phenyl phenol......... For use as preservative only.Tributyl phosphate.....................Tributyltin chloride complex of For use as preservative only.
ethylene oxide condensate of
dehydroabietylamine.Tri-n-butyltin acetate................. For use as preservative only.Tri-n-butyltin neodecanoate............ Do.1,1,1-Trichloroethane..................1,1,2-Trichloroethane..................Trichloroethylene......................Tri-[beta]-chloroethylphosphate........Tridecyl alcohol.......................Triethanolamine........................3-(Triethoxysilyl) propylamine.........Triethylene glycol.....................Triethylene glycol dibenzoate..........Triethylene glycol di(2-ethylhexoate)..Triethylene glycol polyester of benzoic
acid and phthalic acid.Triethylhexyl phosphate................Triethylphosphate......................2,4,5-Trihydroxy butyrophenone.........
Triisopropanolamine....................Trimethylol propane....................2,2,4-Trimethylpentanediol-1,3-
diisobutyrate.Trimeric aromatic amine resin from
diphenylamine and acetone of molecular
weight approximately 500.Tri(nonylphenyl) phosphite-formaldehyde As identified in Sec.
resins. 177.2600(c)(4)(iii) of this
chapter. For use only as a
stabilizer.Triphenylphosphate.....................Tripropylene glycol monomethyl ether...1,3,5-Tris (3,5-di-tert-butyl-4-hydroxy-
benzyl)-triazine-2,4,6 (1H,3H,5H)-
trione.Tris (p-tertiary butyl phenyl)
phosphate.Tris(2-methyl-4-hydroxy-5-tert-butyl-
phenyl)butane.Trisodium N-
hydroxyethylethylenediaminetriacetate
(CAS Reg. No. 139-89-9).Turpentine.............................Urea-formaldehyde resins as described
in Sec. 175.300(b)(3)(xii).Vegetable oil, sulfonated or sulfated,
potassium salt.Vinyl acetate-maleic anhydride
copolymer, sodium salt.Waxes, petroleum.......................Wax, petroleum, chlorinated (40% to 70%
chlorine).Waxes, synthetic paraffin (Fischer-
Tropsch process).3-(2-Xenolyl)-1,2-epoxypropane.........Xylene.................................Xylene (or toluene) alkylated with
dicyclopentadiene.Zein...................................Zinc acetate...........................Zinc ammonium chloride.................Zinc dibenzyl dithiocarbamate..........Zinc dibutyldithiocarbamate............Zinc diethyldithiocarbamate............Zinc di(2-ethylhexoate)................Zinc formaldehyde sulfoxylate..........Zinc naphthenate and
dehydroabietylamine mixture.Zinc nitrate...........................Zinc orthophosphate....................Zinc resinate..........................Zinc sulfide...........................Zineb (zinc ethylenebis-
dithiocarbamate).Ziram (zinc dimethyldithiocarbamate)...------------------------------------------------------------------------ [42 FR 14534, Mar. 15, 1977; 42 FR 56728, Oct. 28, 1977]
Editorial Note: For Federal Register citations affecting Sec. 175.105, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.fdsys.gov.