(a) If longwall or shortwall mining systems are used and the two designated escapeways required by Sec. 75.380 are located on the headgate side of the longwall or shortwall, a travelway shall be provided on the tailgate side of that longwall or shortwall. The travelway shall be located to follow the most direct and safe practical route to a designated escapeway.
(b) The route of travel shall be clearly marked.
(c) When a roof fall or other blockage occurs that prevents travel in the travelway--
(1) Work shall cease on the longwall or shortwall face;
(2) Miners shall be withdrawn from face areas to a safe area outby the section loading point; and
(3) MSHA shall be notified.
(d) Work may resume on the longwall or shortwall face after the procedures set out in Sec. Sec. 75.215 and 75.222 are implemented.