(a) Assign each vehicle a unique identification number and permanently affix, engrave, or stamp it on the vehicle in a legible way. The vehicle identification number (VIN) serves this purpose.
(b) At the time of manufacture, affix a permanent and legible label identifying each vehicle. The label must be--
(1) Attached in one piece so it is not removable without being destroyed or defaced.
(2) Secured to a part of the vehicle needed for normal operation and not normally requiring replacement.
(3) Durable and readable for the vehicle's entire life.
(4) Written in English.
(c) The label must--
(1) Include the heading ``VEHICLE EMISSION CONTROL INFORMATION''.
(2) Include your full corporate name and trademark. You may identify another company and use its trademark instead of yours if you comply with the branding provisions of 40 CFR 1068.45.
(3) Include EPA's standardized designation for the vehicle family.
(4) State the regulatory sub-category that determines the applicable emission standards for the vehicle family (see definition in Sec. 1037.801).
(5) State the date of manufacture [DAY (optional), MONTH, and YEAR]. You may omit this from the label if you stamp, engrave, or otherwise permanently identify it elsewhere on the vehicle, in which case you must also describe in your application for certification where you will identify the date on the vehicle.
(6) Identify the emission control system. Use terms and abbreviations as described in appendix III to this part or other applicable conventions.
(7) Identify any requirements for fuel and lubricants that do not involve fuel-sulfur levels.
(8) State: ``THIS VEHICLE COMPLIES WITH U.S. EPA REGULATIONS FOR [MODEL YEAR] HEAVY-DUTY VEHICLES.''
(9) If you rely on another company to design and install fuel tanks in incomplete vehicles that use an evaporative canister for controlling diurnal emissions, include the following statement: ``THIS VEHICLE IS DESIGNED TO COMPLY WITH EVAPORATIVE EMISSION STANDARDS WITH UP TO x GALLONS OF FUEL TANK CAPACITY.'' Complete this statement by identifying the maximum specified fuel tank capacity associated with your certification.
(d) You may add information to the emission control information label to identify other emission standards that the vehicle meets or does not meet (such as European standards). You may also add other information to ensure that the vehicle will be properly maintained and used.
(e) You may ask us to approve modified labeling requirements in this part 1037 if you show that it is necessary or appropriate. We will approve your request if your alternate label is consistent with the requirements of this part. [76 FR 57398, Sept. 15, 2011, as amended at 78 FR 36392, June 17, 2013; 80 FR 9111, Feb. 19, 2015]