(a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the Environmental Protection Agency must publish a notice of the change in the Federal Register and the material must be available to the public. All approved material is available for inspection at U.S. EPA, Air and Radiation Docket and Information Center, 1301 Constitution Ave., NW., Room B102, EPA West Building, Washington, DC 20460, (202) 202-1744, and is available from the sources listed below. It is also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to http://www.archives.gov/federal--register/code--of--federal--regulations/ibr--locations.html.
(b) International Organization for Standardization, Case Postale 56, CH-1211 Geneva 20, Switzerland, (41) 22749 0111, http://www.iso.org, or central@iso.org.
(1) ISO 28580:2009(E) ``Passenger car, truck and bus tyres--Methods of measuring rolling resistance--Single point test and correlation of measurement results'', First Edition, July 1, 2009; IBR approved for Sec. 1037.520(c).
(2) [Reserved]
(c) U.S. EPA, Office of Air and Radiation, 2565 Plymouth Road, Ann Arbor, MI 48105, http://www.epa.gov:
(1) Greenhouse gas Emissions Model (GEM) simulation tool, Version 2.0.1, September 2012; IBR approved for Sec. 1037.520. The computer code for this model is available as noted in paragraph (a) of this section. A working version of this software is also available for download at http://www.epa.gov/otaq/climate/gem.htm.
(2) [Reserved]
(d) Society of Automotive Engineers, 400 Commonwealth Dr., Warrendale, PA 15096-0001, (877) 606-7323 (U.S. and Canada) or (724) 776-4970 (outside the U.S. and Canada), http://www.sae.org.
(1) SAE J1252, SAE Wind Tunnel Test Procedure for Trucks and Buses, Revised July 1981, IBR approved for Sec. 1037.521(d), (e), and (f).
(2) SAE J1594, Vehicle Aerodynamics Terminology, Revised July 2010, IBR approved for Sec. 1037.521(d).
(3) SAE J2071, Aerodynamic Testing of Road Vehicles--Open Throat Wind Tunnel Adjustment, Revised June 1994, IBR approved for Sec. 1037.521(d). [76 FR 57398, Sept. 15, 2011, as amended at 78 FR 36394, June 17, 2013]