(a) General. (1) Tolerances are established for residues of the insecticide tralomethrin, including its metabolites and degradates, in or on the commodities in the table in this paragraph. Compliance with the tolerance levels specified in this paragraph is to be determined by measuring only the sum of tralomethrin, (S)-cyano(3-phenoxyphenyl)methyl (1R,3S)-2,2-dimethyl-3-(1,2,2,2-tetrabromoethyl)cyclopropanecarboxylate, and its metabolites (S)-cyano(3-phenoxyphenyl)methyl (1R,3R)-3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropanecarboxylate and (S)-cyano(3-phenoxyphenyl)methyl (1S,3R)-3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropanecarboxylate, calculated as the stoichiometric equivalent of tralomethrin, in or on the commodity. ------------------------------------------------------------------------
Expiration/
Commodity Parts per revocation
million date------------------------------------------------------------------------Broccoli........................................ 0.5 7/9/13Cotton, undelinted seed......................... 0.02 7/9/13Cotton, oil..................................... 0.20 7/9/13Lettuce, head................................... 1.00 7/9/13Lettuce, leaf................................... 3.00 7/9/13Soybean, seed................................... 0.05 7/9/13Sunflower, seed................................. 0.05 7/9/13------------------------------------------------------------------------
(2) A tolerance of 0.02 part per million with an expiration/revocation date of July 9, 2013 is established for residues of the insecticide tralomethrin, including its metabolites and degradates, in or on food commodities (other than those covered by a higher tolerance as a result of use on growing crops) in food-handling establishments. Compliance with the tolerance level specified in this paragraph is to be determined by measuring only the sum of tralomethrin, (S)-cyano(3-phenoxyphenyl)methyl (1R,3S)-2,2-dimethyl-3-(1,2,2,2-tetrabromoethyl)cyclopropanecarboxylate, and its metabolites (S)-cyano(3-phenoxyphenyl)methyl (1R,3R)-3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropanecarboxylate and (S)-cyano(3-phenoxyphenyl)methyl (1S,3R)-3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropanecarboxylate, calculated as the stoichiometric equivalent of tralomethrin, in or on the commodity.
(i) The insecticide may be present as a residue from application of tralomethrin in food-handling establishments, including food service, manufacturing, and processing establishments, such as restaurants, cafeterias, supermarkets, bakeries, breweries, dairies, meat slaughtering and packing plants, and canneries.
(ii) The application shall be made in accordance with the following prescribed conditions: Application shall be limited to a general surface and spot and/or crack and crevice treatment in food-handling establishments where food and food products are held, processed, prepared, and served. General surface application may be used only when the facility is not in operation provided exposed food has been covered or removed from the area being treated. All food-contact surfaces and equipment must be thoroughly cleaned after general surface applications. Spot and/or crack and crevice application may be used while the facility is in operation provided exposed food is covered or removed from the area being treated prior to application. Spray concentration shall be limited to a maximum of 0.06 percent active ingredient. Contamination of food and food-contact surfaces shall be avoided.
(3) A tolerance of 0.02 part per million with an expiration/revocation date of July 9, 2013 is established for residues of the insecticide tralomethrin, including its metabolites and degradates, in or on feed commodities (other than those covered by a higher tolerance as a result of use on growing crops) in feed-handling establishments. Compliance with the tolerance level specified in this paragraph is to be determined by measuring only the sum of tralomethrin, (S)-cyano(3-phenoxyphenyl)methyl (1R,3S)-2,2-dimethyl-3-(1,2,2,2-tetrabromoethyl)cyclopropanecarboxylate, and its metabolites (S)-cyano(3-phenoxyphenyl)methyl (1R,3R)-3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropanecarboxylate and (S)-cyano(3-phenoxyphenyl)methyl (1S,3R)-3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropanecarboxylate, calculated as the stoichiometric equivalent of tralomethrin, in or on the commodity.
(i) The insecticide may be present as a residue from application of tralomethrin in feed-handling establishments, including feed manufacturing and processing establishments.
(ii) The application shall be made in accordance with the following prescribed conditions: Application shall be limited to a general surface and spot and/or crack and crevice treatment in feed-handling establishments where feed and feed products are held or processed. General surface application may be used only when the facility is not in operation provided exposed feed has been covered or removed from the area being treated. All feed-contact surfaces and equipment must be thoroughly cleaned after general surface applications. Spot and/or crack and crevice application may be used while the facility is in operation provided exposed feed is covered or removed from the area being treated prior to application. Spray concentration shall be limited to a maximum of 0.06 percent active ingredient. Contamination of feed and feed-contact surfaces shall be avoided.
(b) Section 18 emergency exemptions. [Reserved]
(c) Tolerances with regional registrations. [Reserved]
(d) Indirect or inadvertent residues. [Reserved] [62 FR 63001, Nov. 26, 1997, as amended at 62 FR 66025, Dec. 17, 1997; 65 FR 33701, May 24, 2000; 71 FR 74817, Dec. 13, 2006; 77 FR 59127, Sept. 26, 2012]