(a) Pursuant to section 11(d)(1) of the Act, the Administrator may issue an order to the manufacturer to recall and repair or modify any compressor distributed in commerce not in compliance with this subpart.
(b) A recall order issued pursuant to this section shall be based upon a determination by the Administrator that compressors of a specified category or configuration have been distributed in commerce which do not conform to the regulations. Such determination may be based on:
(1) A technical analysis of the noise emission characteristics of the category or configuration in question; or
(2) Any other relevant information, including test data.
(c) For the purposes of this section, noise emissions may be measured by any test prescribed in Sec. 204.54 for testing prior to sale or any other test which has been demonstrated to correlate with the prescribed test procedure.
(d) Any such order shall be issued only after notice and an opportunity for a hearing in accordance with section 554 of Title 5 of the United States Code.
(e) All costs, including labor and parts, associated with the recall and repair or modification of non-complying compressors under this section shall be borne by the manufacturer.
(f) This section shall not limit the discretion of the Administrator to take any other actions which are authorized by the Act. (Secs. 6, 11, Pub. L. 92-574 (42 U.S.C. 4910)) [41 FR 2172, Jan. 14, 1976, as amended at 42 FR 61456, Dec. 5, 1977]
Sec. Appendix I to Part 204
Table I--Sample Size Code Letters------------------------------------------------------------------------
Batch size Code letter------------------------------------------------------------------------4 to 8....................................... A.9 to 15...................................... B.16 to 25..................................... C.26 and larger................................ D.------------------------------------------------------------------------
Table II--Sampling Plans for Inspecting Batches----------------------------------------------------------------------------------------------------------------
Batch inspection
Test Cumulative criteria
Sample size code letter Test sample sample test -----------------------
size sample Acceptance Rejection
size number number----------------------------------------------------------------------------------------------------------------A..................................... 1st..................... 4 4 0 1B..................................... 1st..................... 3 3 0 1C..................................... 1st..................... 3 3 0 2
2d...................... 3 6 1 2D..................................... 1st..................... 2 2 (\1\) 2
2d...................... 2 4 (\1\) 2
3d...................... 2 6 0 2
4th..................... 2 8 0 3
5th..................... 2 10 1 3
6th..................... 2 12 1 3
7th..................... 2 14 2 3----------------------------------------------------------------------------------------------------------------\1\ Batch acceptance not permitted at this sample size.
Table III--Batch Sequence Plans----------------------------------------------------------------------------------------------------------------
Sequence inspection
Cumulative criteria
Sample size code letter Number number -----------------------
batches batches Acceptance Rejection
number number----------------------------------------------------------------------------------------------------------------A............................................................... 2 2 1 (\1\)
2 4 2 4
2 6 3 5
2 8 4 5B............................................................... 2 2 0 (\1\)
2 4 1 4
2 6 2 5
2 8 3 5
2 10 4 6
2 12 5 6C............................................................... 2 2 (\2\) 2
2 4 0 2
2 6 0 3
2 8 1 3
2 10 2 4
2 12 3 4D............................................................... 2 2 0 2
2 4 1 3
2 6 2 4
2 8 3 4----------------------------------------------------------------------------------------------------------------\1\ Batch sequence rejection not permitted for this number of batches.\2\ Batch sequence acceptance not permitted for this number of batches.
Table IV--Recommended Format for Portable Air Compressor Noise Data Sheet
Test report number:............ ..................Subject:
Manufacturer:.................................... Model:............. Serial No.:....... ..................
Rated speed:................. Rpm:.............. Rated capacity:.... .................. cfm (m\3\/in).
Configuration identification:.................... Category .................. ..................
identification:.
Portable air compressor identification No.:...... Build date:........ .................. ..................Test conditions:
Manufacturer's test site identification and location:..................................... ..................
Reflecting plane composition:............................................................. ..................Operating speed as tested:
Beginning of test.......... rpm
End of test................ rpm
Air pressure supplied:....... psi (kg/cm\2\) Ambient wind speed--
----mph (km/hr).
Actual flow rate:............ cfm (m\3\/min.) Atmospheric
pressure------psi
(kg/cm\2\).
Temperature:................. [deg]F ([deg]C)Instrumentation:
Microphone Manufacturer:......................... Model No.:......... Serial No.:....... ..................
Sound Level Meter Manufacturer:.................. Model No.:......... Serial No.:....... ..................
Calibrator Manufacturer:......................... Model No.:......... Serial No.:....... ..................
Other and Manufacturer:.......................... Model No.:......... Serial No.:....... ..................Data:
--------------------------------------------------------------------------------------------------------------------------------------------------------
Location
----------------------------------------------------------------------------------------
Background sound level Average
Sound levels (decibels) at location 1 (decibels) sound
1 2 3 4 5 level
(decibels)--------------------------------------------------------------------------------------------------------------------------------------------------------A-Weighted--------------------------------------------------------------------------------------------------------------------------------------------------------Tested by:......................................................................................................... Date:.................. ..........Reported by:....................................................................................................... Date:.................. ..........Supervisory personnel:.................................................................... Title:................. ....................... ..........
....... ....... ....... Title:................. ....................... ..........--------------------------------------------------------------------------------------------------------------------------------------------------------