The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
(a) For normal liquid detergent operations the following values pertain: ------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed--------------------------------------------------------------------------
Metric units (kilograms per
1,000 kg of anhydrous
product)
-------------BOD5...................................... 0.10 0.05COD....................................... 0.44 .22TSS....................................... 0.01 .005Surfactants............................... 0.10 .05Oil and grease............................ 0.01 .005pH........................................ (\1\) (\1\)
-------------
English units (pounds per
1,000 lb of anhydrous
product)
-------------BOD5...................................... 0.10 0.05COD....................................... 0.44 .22TSS....................................... 0.01 .005Surfactants............................... 0.10 .05Oil and grease............................ 0.01 .005pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
(b) For fast turnaround operation of automated fill lines, the following values pertain: The maximum for any one day when the number of turnarounds exceeds eight in any thirty consecutive day period shall be the sum of the appropriate value below and that from paragraph (a) of this section; and the average of daily values for thirty consecutive days shall be the value shown below multiplied by the number of turnarounds in excess of eight and prorated to thirty days plus the appropriate value from paragraph (a) of this section: ------------------------------------------------------------------------
Effluent characteristic Effluent limitations------------------------------------------------------------------------
Metric units (kilograms per
1,000 kg of anhydrous product)
---------------------------------BOD5.................................. 0.02.COD................................... 0.07.TSS................................... 0.002.Surfactants........................... 0.02.Oil and grease........................ 0.002.pH.................................... Within the range 6.0 to 9.0.
---------------------------------
English units (pounds per 1,000
lb of anhydrous product)
---------------------------------BOD5.................................. 0.02.COD................................... 0.07.TSS................................... 0.002.Surfactants........................... 0.02.Oil and grease........................ 0.002.pH.................................... Within the range 6.0 to 9.0.------------------------------------------------------------------------