The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:
(a) Any manufacturing plant which produces incandescent lamp envelopes shall meet the following limitations with regard to the forming operations. ------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed--------------------------------------------------------------------------
Metric units (g/kkg of
furnace pull)
-----------------------------Oil....................................... 90.0 45.0TSS....................................... 90.0 45.0pH........................................ (\1\) (\1\)
-----------------------------
English units (lb/1,000 lb
of furnace pull)
-----------------------------Oil....................................... 0.09 0.045TSS....................................... 0.09 0.045pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.
(b) Any manufacturing plant which frosts incandescent lamp envelopes shall meet the following limitations with regard to the finishing operations. ------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not
exceed--------------------------------------------------------------------------
Metric units (g/kkg of
product frosted)
-----------------------------Fluoride.................................. 104.0 52.0Ammonia................................... 240.0 120.0TSS....................................... 80.0 40.0pH........................................ (\1\) (\1\)
-----------------------------
English units (lb/1,000 lb
of product frosted)
-----------------------------Fluoride.................................. 0.104 0.052Ammonia................................... 0.24 0.12TSS....................................... 0.08 0.04pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.