Code of Federal Regulations (alpha)

CFR /  Title 40  /  Part 428  /  Sec. 428.105 Standards of performance for new sources.

(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: ------------------------------------------------------------------------

Effluent limitations

-----------------------------

Average of daily

Effluent characteristic Maximum values for 30

for any 1 consecutive days

day shall not

exceed--------------------------------------------------------------------------

Metric units (kg/kkg of raw

material)

-----------------------------Oil and grease............................ 2.0 0.73BOD5...................................... 3.72 2.20TSS....................................... 6.96 2.90pH........................................ (\1\) (\1\)

-----------------------------

English units (lb/1,000 lb

of raw material)

-----------------------------Oil and grease............................ 2.0 0.73BOD5...................................... 3.72 2.20TSS....................................... 6.96 2.90pH........................................ (\1\) (\1\)------------------------------------------------------------------------\1\ Within the range 6.0 to 9.0.

(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to plants employing the chromic acid form-cleaning operation, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by Sec. 428.102(a): ------------------------------------------------------------------------

Effluent limitations

-----------------------------

Average of daily

Effluent characteristic Maximum values for 30

for any 1 consecutive days

day shall not

exceed--------------------------------------------------------------------------

Metric units (kg/kkg of raw

material)

-----------------------------Chromium.................................. 0.0086 0.0036

-----------------------------

English units (lb/1,000 lb

of raw material)

-----------------------------Chromium.................................. 0.0086 0.0036------------------------------------------------------------------------