Code of Federal Regulations (alpha)

CFR /  Title 40  /  Part 467  /  Sec. 467.66 Pretreatment standards for new sources.

Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in aluminum forming process wastewaters introduced into a POTW shall not exceed the values set forth below:

Subpart F

Core ------------------------------------------------------------------------

PSNS

---------------------------

Pollutant or pollutant property Maximum for

Maximum for monthly

any 1 day average------------------------------------------------------------------------

mg/off-kg (lb/million off-

lbs) of aluminum drawn

with emulsions or soaps

---------------------------Chromium.................................... 0.173 0.070Cyanide..................................... 0.094 0.038Zinc........................................ 0.48 0.196TTO......................................... 0.32 ............Oil and grease (alternate monitoring 4.67 4.67

parameter).................................------------------------------------------------------------------------

Subpart F

Continuous Rod Casting Lubricant ------------------------------------------------------------------------

PSNS

---------------------------

Pollutant or pollutant property Maximum for

Maximum for monthly

any 1 day average------------------------------------------------------------------------

mg/off-kg (lb/million off-

lbs) of aluminum rod cast

---------------------------Chromium.................................... 0.0008 0.0003Cyanide..................................... 0.0004 0.0002Zinc........................................ 0.0020 0.0008TTO......................................... 0.0014 ............Oil and grease (alternate monitoring 0.020 0.020

parameter).................................------------------------------------------------------------------------

Subpart F

Continuous Rod Casting Contact Cooling Water ------------------------------------------------------------------------

PSNS

---------------------------

Pollutant or pollutant property Maximum for

Maximum for monthly

any 1 day average------------------------------------------------------------------------

mg/off-kg (lb/million off-

lbs) of aluminum rod cast

---------------------------Chromium.................................... 0.072 0.029Cyanide..................................... 0.039 0.016Zinc........................................ 0.198 0.082TTO......................................... 0.134 ............Oil and grease (alternate monitoring 1.94 1.94

parameter).................................------------------------------------------------------------------------

Subpart F

Solution Heat Treatment Contact Cooling Water ------------------------------------------------------------------------

PSNS

--------------------------

Pollutant or pollutant property Maximum for

Maximum for monthly

any 1 day average------------------------------------------------------------------------

mg/off-kg (lb/million off-

lbs) of aluminum quenched

--------------------------Chromium..................................... 0.76 0.306Cyanide...................................... 0.41 0.163Zinc......................................... 2.08 0.856TTO.......................................... 1.41 ............Oil and grease (alternate monitoring 20.37 20.37

parameter)..................................------------------------------------------------------------------------

Subpart F

Cleaning or Etching Bath ------------------------------------------------------------------------

PSNS

---------------------------

Pollutant or pollutant property Maximum for

Maximum for monthly

any 1 day average------------------------------------------------------------------------

mg/off-kg (lb/million off-

lbs) of aluminum cleaned

or etched

---------------------------Chromium.................................... 0.067 0.027Cyanide..................................... 0.036 0.015Zinc........................................ 0.183 0.075TTO......................................... 0.124 ............Oil and grease (alternate monitoring 1.79 1.79

parameter).................................------------------------------------------------------------------------

Subpart F

Cleaning or Etching Rinse ------------------------------------------------------------------------

PSNS

-------------------------

Pollutant or pollutant property Maximum for

Maximum for monthly

any 1 day average------------------------------------------------------------------------

mg/off-kg (lb/million

off-lbs) of aluminum

cleaned or etched

-------------------------Chromium...................................... 0.52 0.21Cyanide....................................... 0.28 0.11Zinc.......................................... 1.42 0.59TTO........................................... 0.96 ...........Oil and grease (alternate monitoring 13.91 13.91

parameter)...................................------------------------------------------------------------------------

Subpart F

Cleaning or Etching Scrubber Liquor ------------------------------------------------------------------------

PSNS

---------------------------

Pollutant or pollutant property Maximum for

Maximum for monthly

any 1 day average------------------------------------------------------------------------

mg/off-kg (lb/million off-

lbs) of aluminum cleaned

or etched

---------------------------Chromium.................................... 0.715 0.290Cyanide..................................... 0.387 0.155Zinc........................................ 1.97 0.812TTO......................................... 1.34 ............Oil and grease (alternate monitoring 19.33 19.33

parameter).................................------------------------------------------------------------------------ [48 FR 49149, Oct. 24, 1983; 49 FR 11632, 11633, and 11636, Mar. 27, 1984]