(a) Fuel economy. Determine city and highway fuel economy values as described in Sec. 600.210-12(a) and (b). Determine combined fuel economy values as described in Sec. 600.210-12(c). Note that the label for plug-in hybrid electric vehicles requires separate values for combined fuel economy for vehicle operation before and after the vehicle's battery is fully discharged; we generally refer to these modes as ``Blended Electric+Gas'' (or ``Electric Only'', as applicable) and ``Gas only''.
(b) CO2 emission rate. Determine the engine-related CO2 emission rate as described in Sec. 600.210-12(d).
(c) Fuel consumption rate. Calculate the fuel consumption rate as follows:
(1) For vehicles with engines that are not plug-in hybrid electric vehicles, calculate the fuel consumption rate in gallons per 100 miles (or gasoline gallon equivalent per 100 miles for fuels other than gasoline or diesel fuel) with the following formula, rounded to the first decimal place: Fuel Consumption Rate = 100/MPG Where: MPG = The value for combined fuel economy from Sec. 600.210-12(c),
rounded to the nearest whole mpg.
(2) For plug-in hybrid electric vehicles, calculate two separate fuel consumption rates as follows:
(i) Calculate the fuel consumption rate based on engine operation after the battery is fully discharged as described in paragraph (c)(1) of this section.
(ii) Calculate the fuel consumption rate during operation before the battery is fully discharged in kW-hours per 100 miles as described in SAE J1711 (incorporated by reference in Sec. 600.011), as described in Sec. 600.116.
(3) For electric vehicles, calculate the fuel consumption rate in kW-hours per 100 miles with the following formula, rounded to the nearest whole number: Fuel Consumption Rate = 100/MPG Where: MPG = The combined fuel economy value from paragraph (a) of this
section, in miles per kW-hour.
(4) For hydrogen fuel cell vehicles, calculate the fuel consumption rate in kilograms of hydrogen per 100 miles with the following formula, rounded to the nearest whole number: Fuel Consumption Rate = 100/MPG Where: MPG = The combined fuel economy value from paragraph (a) of this
section, in miles per kilogram of hydrogen.
(d) Fuel economy and greenhouse gas ratings. Determine a vehicle's fuel economy and greenhouse gas ratings as follows:
(1) For gasoline-fueled vehicles that are not plug-in hybrid electric vehicles (including flexible fuel vehicles that operate on gasoline), establish a single rating based only on the vehicle's combined fuel economy from paragraph (a) of this section. For all other vehicles, establish a fuel economy rating based on the vehicle's combined fuel economy and establish a separate greenhouse gas rating based on combined CO2 emission rates from paragraph (b) of this section.
(2) We will establish the fuel economy rating based on fuel consumption values specified in paragraph (c) of this section. We will establish the value dividing the 5 and 6 ratings based on the fuel consumption corresponding to the projected achieved Corporate Average Fuel Economy level for the applicable model year. This is intended to prevent below-average vehicles from getting an above-average fuel economy rating for the label. We will establish the remaining cutpoints based on a statistical evaluation of available information from the certification database for all model types. Specifically, the mean value plus two standard deviations will define the point between the 1 and 2 ratings. The mean value minus two standard deviations will define the point between the 9 and 10 ratings. The 1 rating will apply for any vehicle with higher fuel consumption rates than the 2 rating; similarly, the 10 rating will apply for any vehicle with lower fuel consumption rates than the 9 rating. We will calculate range values for the remaining intermediate ratings by dividing the range into equal intervals. We will convert the resulting range intervals to equivalent miles-per-gallon values. We will define the greenhouse gas ratings by converting the values from the fuel economy rating intervals to equivalent CO2 emission rates using the conventional conversion factor for gasoline (8887 g CO2 per gallon of consumed fuel).
(e) Annual fuel cost. Calculate annual fuel costs as follows:
(1) Except as specified in paragraph (e)(3) of this section, calculate the total annual fuel cost with the following formula, rounded to nearest $50: Annual Fuel Cost = Fuel Price/MPG x Average Annual Miles Where: Fuel Price = The estimated fuel price provided by EPA for the type of
fuel required for the vehicle. The units are dollars per
gallon for gasoline and diesel fuel, dollars per gasoline
gallon equivalent for natural gas, dollars per kW-hr for plug-
in electricity, and dollars per kilogram of hydrogen for
hydrogen fuel cell vehicles.MPG = The combined fuel economy value from paragraph (a) of this
section. The units are miles per gallon for gasoline and
diesel fuel, miles per gasoline gallon equivalent for natural
gas, miles per kW-hr for plug-in electricity, and miles per
kilogram of hydrogen for hydrogen fuel cell vehicles.Average Annual Miles = The estimated annual mileage figure provided by
EPA, in miles.
(2) For dual fuel vehicles and flexible fuel vehicles, disregard operation on the alternative fuel.
(3) For plug-in hybrid electric vehicles, calculate annual fuel cost as described in this paragraph (e)(3). This description applies for vehicles whose engine starts only after the battery is fully discharged. Use good engineering judgment to extrapolate this for calculating annual fuel cost for vehicles that use combined power from the battery and the engine before the battery is fully discharged. Calculate annual fuel cost as follows:
(i) Determine the charge-depleting ranges for city and highway operation as described in paragraph (j)(4)(i) of this section. Adjust each of these values for 5-cycle operation.
(ii) Calculate multi-day individual utility factors (UF) as described in Sec. 600.116 corresponding to the driving ranges from paragraph (e)(3)(i) of this section.
(iii) Calculate values for the vehicle's average fuel economy over the charge-depleting range (in miles per kW-hr) for city and highway operation as described in Sec. 600.210. Adjust each of these values for 5-cycle operation. Convert these to $/mile values by dividing the appropriate fuel price from paragraph (e)(1) of this section by the average fuel economy determined in this paragraph (e)(3)(iii).
(iv) Calculate values for the vehicle's average fuel economy over the charge-sustaining range (in miles per gallon) for city and highway operation as described in Sec. 600.210-12. Adjust each of these values for 5-cycle operation. Convert these to $/mile values by dividing the appropriate fuel price from paragraph (e)(1) of this section by the average fuel economy determined in this paragraph (e)(3)(iv).
(v) Calculate a composite $/mile value for city driving using the following equation: $/mile = $/mileCD x UF + $/mileCS x (1-UF)
(vi) Repeat the calculation in paragraph (e)(3)(v) of this section for highway driving.
(vii) Calculate the annual fuel cost based on the combined values for city and highway driving using the following equation: Annual fuel cost = ($/milecity x 0.55 + $/milehwy x 0.45) x Average Annual Miles
(4) Round the annual fuel cost to the nearest $50 by dividing the unrounded annual fuel cost by 50, then rounding the result to the nearest whole number, then multiplying this rounded result by 50 to determine the annual fuel cost to be used for purposes of labeling.
(f) Fuel savings. Calculate an estimated five-year cost increment relative to an average vehicle by multiplying the annual fuel cost from paragraph (e) of this section by 5 and subtracting this value from the average five-year fuel cost. We will calculate the average five-year fuel cost from the annual fuel cost equation in paragraph (e) of this section based on a gasoline-fueled vehicle with a mean fuel economy value, consistent with the value dividing the 5 and 6 ratings under paragraph (d) of this section. The average five-year fuel cost for model year 2012 is $12,600 for a 22-mpg vehicle that drives 15,000 miles per year with gasoline priced at $3.70 per gallon. We may periodically update this five year reference fuel cost for later model years to better characterize the fuel economy for an average vehicle. Round the calculated five-year cost increment to the nearest $50. Negative values represent a cost increase compared to the average vehicle.
(g) Smog rating. Establish a rating for exhaust emissions other than CO2 based on the applicable emission standards for the appropriate model year as shown in Tables 1 through 3 of this section. For Independent Commercial Importers that import vehicles not subject to Tier 2 or Tier 3 emission standards, the vehicle's smog rating is 1. Similarly, if a manufacturer certifies vehicles to emission standards that are less stringent than all the identified standards for any reason, the vehicle's smog rating is 1. If EPA or California emission standards change in the future, we may revise the emission levels corresponding to each rating for future model years as appropriate to reflect the changed standards. If this occurs, we would publish the revised ratings as described in Sec. 600.302-12(k), allowing sufficient lead time to make the changes; we would also expect to initiate a rulemaking to update the smog rating in the regulation.
Table 1 of Sec. 600.311-12--Criteria for Establishing Smog Rating for Model Year 2025 and Later----------------------------------------------------------------------------------------------------------------
U.S. EPA Tier 3 Emission California Air Resources Board LEV III
Rating Standard Emission Standard----------------------------------------------------------------------------------------------------------------1.................................. Bin 160.................... LEV 160.2.................................. Bin 125.................... ULEV125.4.................................. Bin 70..................... ULEV70.5.................................. Bin 50..................... ULEV50.6.................................. Bin 30..................... SULEV30.7.................................. Bin 20..................... SULEV20.10................................. Bin 0...................... ZEV.----------------------------------------------------------------------------------------------------------------
Table 2 of Sec. 600.311-12--Criteria for Establishing Smog Rating for Model Years 2018-2024----------------------------------------------------------------------------------------------------------------
U.S. EPA Tier 3 U.S EPA Tier 2 California Air Resources Board LEV III
Rating Emission Standard Emission Standard Emission Standard----------------------------------------------------------------------------------------------------------------1............................. Bin 160.......... Bin 5 through Bin LEV 160.
8.3............................. Bin 125.......... Bin 4............ ULEV125.5............................. Bin 70........... Bin 3............ ULEV70.6............................. Bin 50........... ................. ULEV50.7............................. Bin 30........... Bin 2............ SULEV30.8............................. Bin 20........... ................. SULEV20.10............................ Bin 0............ Bin 1............ ZEV.----------------------------------------------------------------------------------------------------------------
Table 3 of Sec. 600.311-12--Criteria for Establishing Smog Rating Through Model Year 2017----------------------------------------------------------------------------------------------------------------
California Air
U.S. EPA Tier 2 Resources Board California Air Resources Board LEV III
Rating Emission Standard LEV II Emission Emission Standard
Standard----------------------------------------------------------------------------------------------------------------1............................. ................. ULEV & LEV II
large trucks.2............................. Bin 8............ SULEV II large
trucks.3............................. Bin 7............4............................. Bin 6............ LEV II, option 1.5............................. Bin 5............ LEV II........... LEV160.6............................. Bin 4............ ULEV II.......... ULEV125.7............................. Bin 3............ ................. ULEV70, ULEV50.8............................. Bin 2............ SULEV II......... SULEV30.9............................. ................. PZEV............. SULEV20, PZEV.10............................ Bin 1............ ZEV.............. ZEV.----------------------------------------------------------------------------------------------------------------
(h) Ranges of fuel economy and CO2 emission values. We will determine the range of combined fuel economy and CO2 emission values for each vehicle class identified in Sec. 600.315. We will generally update these range values before the start of each model year based on the lowest and highest values within each vehicle class. We will also use this same information to establish a range of fuel economy values for all vehicles. Continue to use the most recently published numbers until we update them, even if you start a new model year before we publish the range values for the new model year.
(i) [Reserved]
(j) Driving range. Determine the driving range for certain vehicles as follows:
(1) For vehicles operating on nonpressurized liquid fuels, determine the vehicle's driving range in miles by multiplying the combined fuel economy described in paragraph (a) of this section by the vehicle's usable fuel storage capacity, rounded to the nearest whole number.
(2) For electric vehicles, determine the vehicle's overall driving range as described in Section 8 of SAE J1634 (incorporated by reference in Sec. 600.011), as described in Sec. 600.116. Determine separate range values for FTP-based city and HFET-based highway driving, then calculate a combined value by arithmetically averaging the two values, weighted 0.55 and 0.45 respectively, and rounding to the nearest whole number.
(3) For natural gas vehicles, determine the vehicle's driving range in miles by multiplying the combined fuel economy described in paragraph (a) of this section by the vehicle's usable fuel storage capacity (expressed in gasoline gallon equivalents), rounded to the nearest whole number.
(4) For plug-in hybrid electric vehicles, determine the battery driving range and overall driving range as described in SAE J1711 (incorporated by reference in Sec. 600.011), as described in Sec. 600.116, as follows:
(i) Determine the vehicle's Actual Charge-Depleting Range, Rcda. Determine separate range values for FTP-based city and HFET-based highway driving, then calculate a combined value by arithmetically averaging the two values, weighted 0.55 and 0.45 respectively, and rounding to the nearest whole number. Precondition the vehicle as needed to minimize engine operation for consuming stored fuel vapors in evaporative canisters; for example, you may purge the evaporative canister or time a refueling event to avoid engine starting related to purging the canister. For vehicles that use combined power from the battery and the engine before the battery is fully discharged, also use this procedure to establish an all electric range by determining the distance the vehicle drives before the engine starts, rounded to the nearest mile. You may represent this as a range of values. We may approve adjustments to these procedures if they are necessary to properly characterize a vehicle's all electric range.
(ii) Use good engineering judgment to calculate the vehicle's operating distance before the fuel tank is empty when starting with a full fuel tank and a fully charged battery, consistent with the procedure and calculation specified in this paragraph (j), rounded to the nearest 10 miles.
(5) For hydrogen fuel cell vehicles, determine the vehicle's driving range in miles by multiplying the combined fuel economy described in paragraph (a) of this section by the vehicle's usable fuel storage capacity (expressed in kilograms of hydrogen), rounded to the nearest whole number.
(k) Charge time. For electric vehicles, determine the time it takes to fully charge the battery from a 240 volt power source to the point that the battery meets the manufacturer's end-of-charge criteria, consistent with the procedures specified in SAE J1634 (incorporated by reference in Sec. 600.011) for electric vehicles and in SAE J1711 (incorporated by reference in Sec. 600.011) for plug-in hybrid electric vehicles, as described in Sec. 600.116. This value may be more or less than the 12-hour minimum charging time specified for testing. You must alternatively specify the charge time based on a standard 120 volt power source if the vehicle cannot be charged at the higher voltage.
(l) California-specific values. If the Administrator determines that automobiles intended for sale in California are likely to exhibit significant differences in fuel economy or other label values from those intended for sale in other states, the Administrator will compute separate values for each class of automobiles for California and for the other states. [76 FR 39563, July 6, 2011, as amended at 76 FR 57380, Sept. 15, 2011; 77 FR 63184, Oct. 15, 2012; 79 FR 23747, Apr. 28, 2014]