The provisions in 40 CFR part 63, subpart A, applicable to sources subject to Sec. 63.11514(a) are specified in Table 2 of this subpart.
Sec. Table 1 to Subpart XXXXXX of Part 63--Description of Source
Categories Affected by This Subpart ------------------------------------------------------------------------
Metal fabrication and
finishing source category Description------------------------------------------------------------------------Electrical and Electronic Establishments primarily engaged in
Equipment Finishing manufacturing motors and generators; and
Operations. electrical machinery, equipment, and
supplies, not elsewhere classified. The
electrical machinery equipment and
supplies industry sector of this source
category includes establishments
primarily engaged in high energy
particle acceleration systems and
equipment, electronic simulators,
appliance and extension cords, bells and
chimes, insect traps, and other
electrical equipment and supplies not
elsewhere classified. The motors and
generators sector of this source
category includes establishments
primarily engaged in manufacturing
electric motors (except engine starting
motors) and power generators; motor
generator sets; railway motors and
control equipment; and motors,
generators and control equipment for
gasoline, electric, and oil-electric
buses and trucks.Fabricated Metal Products.... Establishments primarily engaged in
manufacturing fabricated metal products,
such as fire or burglary resistive steel
safes and vaults and similar fire or
burglary resistive products; and
collapsible tubes of thin flexible
metal. Also, establishments primarily
engaged in manufacturing powder
metallurgy products, metal boxes; metal
ladders; metal household articles, such
as ice cream freezers and ironing
boards; and other fabricated metal
products not elsewhere classified.Fabricated Plate Work (Boiler Establishments primarily engaged in
Shops). manufacturing power marine boilers,
pressure and nonpressure tanks,
processing and storage vessels, heat
exchangers, weldments and similar
products.Fabricated Structural Metal Establishments primarily engaged in
Manufacturing. fabricating iron and steel or other
metal for structural purposes, such as
bridges, buildings, and sections for
ships, boats, and barges.Heating Equipment, except Establishments primarily engaged in
Electric. manufacturing heating equipment, except
electric and warm air furnaces,
including gas, oil, and stoker coal
fired equipment for the automatic
utilization of gaseous, liquid, and
solid fuels. Products produced in this
source category include low-pressure
heating (steam or hot water) boilers,
fireplace inserts, domestic (steam or
hot water) furnaces, domestic gas
burners, gas room heaters, gas infrared
heating units, combination gas-oil
burners, oil or gas swimming pool
heaters, heating apparatus (except
electric or warm air), kerosene space
heaters, gas fireplace logs, domestic
and industrial oil burners, radiators
(except electric), galvanized iron
nonferrous metal range boilers, room
heaters (except electric), coke and gas
burning salamanders, liquid or gas solar
energy collectors, solar heaters, space
heaters (except electric), mechanical
(domestic and industrial) stokers, wood
and coal-burning stoves, domestic unit
heaters (except electric), and wall
heaters (except electric).
Industrial Machinery and Establishments primarily engaged in
Equipment Finishing construction machinery manufacturing;
Operations. oil and gas field machinery
manufacturing; and pumps and pumping
equipment manufacturing. The
construction machinery manufacturing
industry sector of this source category
includes establishments primarily
engaged in manufacturing heavy machinery
and equipment of types used primarily by
the construction industries, such as
bulldozers; concrete mixers; cranes,
except industrial plant overhead and
truck-type cranes; dredging machinery;
pavers; and power shovels. Also
establishments primarily engaged in
manufacturing forestry equipment and
certain specialized equipment, not
elsewhere classified, similar to that
used by the construction industries,
such as elevating platforms, ship
cranes, and capstans, aerial work
platforms, and automobile wrecker
hoists. The oil and gas field machinery
manufacturing industry sector of this
source category includes establishments
primarily engaged in manufacturing
machinery and equipment for use in oil
and gas fields or for drilling water
wells, including portable drilling rigs.
The pumps and pumping equipment
manufacturing sector of this source
category includes establishments
primarily engaged in manufacturing pumps
and pumping equipment for general
industrial, commercial, or household
use, except fluid power pumps and
motors. This category includes
establishments primarily engaged in
manufacturing domestic water and sump
pumps.Iron and Steel Forging....... Establishments primarily engaged in the
forging manufacturing process, where
purchased iron and steel metal is
pressed, pounded or squeezed under great
pressure into high strength parts known
as forgings. The forging process is
different from the casting and foundry
processes, as metal used to make forged
parts is never melted and poured.Primary Metals Products Establishments primarily engaged in
Manufacturing. manufacturing products such as
fabricated wire products (except
springs) made from purchased wire. These
facilities also manufacture steel balls;
nonferrous metal brads and nails;
nonferrous metal spikes, staples, and
tacks; and other primary metals products
not elsewhere classified.Valves and Pipe Fittings..... Establishments primarily engaged in
manufacturing metal valves and pipe
fittings; flanges; unions, with the
exception of purchased pipes; and other
valves and pipe fittings not elsewhere
classified.------------------------------------------------------------------------
Sec. Table 2 to Subpart XXXXXX of Part 63--Applicability of General
Provisions to Metal Fabrication or Finishing Area Sources
Instructions for Table 2--As required in Sec. 63.11523, ``General Provisions Requirements,'' you must meet each requirement in the following table that applies to you. ------------------------------------------------------------------------
Citation Subject------------------------------------------------------------------------63.1\1\................................ Applicability.63.2................................... Definitions.63.3................................... Units and abbreviations.63.4................................... Prohibited activities.63.5................................... Construction/reconstruction.63.6(a), (b)(1)-(b)(5), (c)(1), (c)(2), Compliance with standards and
(c)(5), (g), (i), (j). maintenance requirements.63.9(a)-(d)............................ Notification requirements.63.10(a), (b) except for (b)(2), Recordkeeping and reporting.
(5), (g), (i), (j). maintenance requirements.63.9(a)-(d)............................ Notification requirements.63.10(a), (b) except for (b)(2), Recordkeeping and reporting.
(d)(1), (d)(4).63.12.................................. State authority and
(1), (d)(4).63.12.................................. State authority and
delegations.63.13.................................. Addresses of State air
pollution control agencies and
EPA regional offices.63.14.................................. Incorporation by reference.63.15.................................. Availability of information and
confidentiality.63.16.................................. Performance track provisions.------------------------------------------------------------------------\1\ Sec. 63.11514(g), ``Am I subject to this subpart?'' exempts
affected sources from the obligation to obtain title V operating
permits. Subpart YYYYYY_National Emission Standards for Hazardous Air Pollutants
for Area Sources: Ferroalloys Production Facilities
Source: 73 FR 78643, Dec. 23, 2008, unless otherwise noted.
Applicability and Compliance Dates