You must prepare and submit reports to the Administrator as required by this subpart and Sec. 63.10 of the general provisions in subpart A of this part. These reports include, but are not limited to, the following:
(a) A performance test report, as required by Sec. 63.10(d)(2) of the general provisions in subpart A of this part, that documents the process and control equipment operating parameters during the test period, the test methods and procedures, the analytical procedures, all calculations, and the results of the performance tests.
(b) A startup, shutdown, and malfunction plan, as described in Sec. 63.6(e)(3) of the general provisions in subpart A of this part, that contains specific procedures for operating and maintaining the source during periods of startup, shutdown, and malfunction and a program of corrective action for malfunctioning process and control systems used to comply with the emission standards. In addition to the information required by Sec. 63.6(e)(3), your plan must include the following:
(1) Procedures to determine and record what caused the malfunction and when it began and ended.
(2) Corrective actions you will take if a process or control device malfunctions, including procedures for recording the actions taken to correct the malfunction or minimize emissions.
(3) An inspection and maintenance schedule for each process and control device that is consistent with the manufacturer's instructions and recommendations for routine and long-term maintenance.
(c) A report of each event as required by Sec. 63.10(b) of the general provisions in subpart A of this part, including a report if an action taken during a startup, shutdown, or malfunction is inconsistent with the procedures in the plan as described in Sec. 63.6(e)(3) of the general provisions in subpart A of this part.
(d) An operations, maintenance, and monitoring plan as specified in Sec. 63.1187 of this subpart.
(e) A semiannual report as required by Sec. 63.10(e)(3) of the general provisions in subpart A of this part if measured emissions exceed the applicable standard or a monitored parameter varies from the level established during performance testing. The report must contain the information specified in Sec. 63.10(c) of the general provisions, as well as the relevant records required by Sec. 63.1192(b) of this subpart.
(f) A semiannual report stating that no excess emissions or deviations of monitored parameters occurred during the reporting period as required by Sec. 63.10(e)(3)(v) of the general provisions in subpart A of this part if no deviations have occurred.
Other Requirements and Information