(a) You must be in compliance with the emission limitations in Sec. Sec. 63.3090 and 63.3091 at all times, as determined on a monthly basis.
(b) The coating operations must be in compliance with the operating limits for emission capture systems and add-on control devices required by Sec. 63.3093 at all times except during periods of startup, shutdown, and malfunction.
(c) You must be in compliance with the work practice standards in Sec. 63.3094 at all times.
(d) You must always operate and maintain your affected source including all air pollution control and monitoring equipment you use for purposes of complying with this subpart according to the provisions in Sec. 63.6(e)(1)(i).
(e) You must maintain a log detailing the operation and maintenance of the emission capture systems, add-on control devices, and continuous parameter monitoring systems (CPMS) during the period between the compliance date specified for your affected source in Sec. 63.3083 and the date when the initial emission capture system and add-on control device performance tests have been completed, as specified in Sec. 63.3160.
(f) If your affected source uses emission capture systems and add-on control devices, you must develop a written startup, shutdown, and malfunction plan (SSMP) according to the provisions in Sec. 63.6(e)(3). The SSMP must address startup, shutdown, and corrective actions in the event of a malfunction of the emission capture system or the add-on control devices. [69 FR 22623, Apr. 26, 2004, as amended at 71 FR 20464, Apr. 20, 2006]