(a) For each compliance period, to demonstrate continuous compliance, you must use no coating for which the organic HAP content, determined according to Sec. 63.4141(d), exceeds the applicable emission limit in Sec. 63.4090, and use no thinner or cleaning material that contains organic HAP, determined according to Sec. 63.4141(a). Each month following the initial compliance period described in Sec. 63.4140 is a compliance period.
(b) If you choose to comply with the emission limitations by using the compliant material option, the use of any coating, thinner, or cleaning material that does not meet the criteria specified in paragraph (a) of this section is a deviation from the emission limitations that must be reported as specified in Sec. Sec. 63.4110(b)(6) and 63.4120(d).
(c) As part of each semiannual compliance report required by Sec. 63.4120, you must submit a statement that you were in compliance with the emission limitations during the reporting period because you used no thinners or cleaning materials that contained organic HAP, and you used no coatings for which the organic HAP content exceeded the applicable emission limit in Sec. 63.4090.
(d) You must maintain records as specified in Sec. Sec. 63.4130 and 63.4131.
Compliance Requirements for the Emission Rate Without Add-On Controls
Option