(a) You must demonstrate continuous compliance with the emission standards in Sec. 63.5305 by following the requirements in paragraphs (a)(1) and (2) of this section:
(1) You must collect and monitor data according to the procedures in your plan for demonstrating compliance as specified in Sec. 63.5325.
(2) If you use an emission control device, you must collect the monitoring data according to 40 CFR part 63, subpart SS.
(3) You must maintain your compliance ratio less than or equal to 1.00, as specified at Sec. 63.5330.
(b) You must report each instance in which you did not meet the emission standards in Sec. 63.5305. This includes periods of startup, shutdown, and malfunction. These deviations must be reported according to the requirements in Sec. 63.5420(b).
(c) You must conduct the initial compliance demonstration before the compliance date that is specified for your source in Sec. 63.5295.
Testing and Initial Compliance Requirements