(a) You must maintain records that document continuous compliance with the certification requirements in Sec. 63.7700(b) or with the procedures in your scrap selection and inspection plan required in Sec. 63.7700(c). Your records documenting compliance with the scrap selection and inspection plan must include a copy (kept onsite) of the procedures used by the scrap supplier for either removing accessible mercury switches or for purchasing automobile bodies that have had mercury switches removed, as applicable.
(b) You must keep records of the chemical composition of all catalyst binder formulations applied in each furan warm box mold or core making line at a new or existing iron and steel foundry to demonstrate continuous compliance with the requirements in Sec. 63.7700(d).
(c) For a scrap preheater at an existing iron and steel foundry, you must operate and maintain each gas-fired preheater such that the flame directly contacts the scrap charged to demonstrate continuous compliance with the requirement Sec. 63.7700(e)(1). If you choose to meet the work practice standard in Sec. 63.7700(e)(2), you must keep records to document that the scrap preheater charges only material that is subject to and in compliance with the scrap certification requirements in Sec. 63.7700(b).
(d) For a scrap preheater at a new iron and steel foundry, you must keep records to document that each scrap preheater charges only material that is subject to and in compliance with the scrap certification requirements in Sec. 63.7700(b) to demonstrate continuous compliance with the requirement in Sec. 63.7700(f).