(a) You must control HAP emissions from each new and existing container subject to Sec. 63.7886(b)(1)(ii) according to emissions limitations and work practice standards in this section that apply to your affected containers.
(b) For each container having a design capacity greater than 0.1 m\3\ you must meet the requirements in paragraph (b)(1) or (2) of this section that apply to your container except at the times the container is used for treatment of remediation material by a waste stabilization process, as defined in Sec. 63.7957. As an alternative for any container subject to this paragraph, you may choose to meet the requirements in paragraph (d) of this section.
(1) If the design capacity of your container is less than or equal to 0.46 m\3\, then you must use controls according to the standards for Container Level 1 controls as specified in Sec. 63.922. As an alternative, you may choose to use controls according to either of the standards for Container Level 2 controls as specified in Sec. 63.923.
(2) If the design capacity of your container is greater than 0.46 m\3\, then you must use controls according to the standards for Container Level 2 controls as specified in Sec. 63.923 except as provided for in paragraph (b)(3) of this section.
(3) As an alternative to meeting the standards in paragraph (b)(2) of this section for containers with a capacity greater than 0.46 m\3\, if you determine that either of the conditions in paragraphs (b)(3)(i) or (ii) apply to the remediation material placed in your container, then you may use controls according to the standards for Container Level 1 controls as specified in Sec. 63.922.
(i) Vapor pressure of every organic constituent in the remediation material placed in your container is less than 0.3 kPa at 20 C; or
(ii) Total concentration of the pure organic constituents having a vapor pressure greater than 0.3 kPa at 20 C in the remediation material placed in your container is less than 20 percent by weight.
(c) At times when a container having a design capacity greater than 0.1 m\3\ is used for treatment of a remediation material by a waste stabilization process as defined in Sec. 63.7957, you must control air emissions from the container during the process whenever the remediation material in the container is exposed to the atmosphere according to the standards for Container Level 3 controls as specified in Sec. 63.924. You must meet the emissions limitations and work practice standards in Sec. 63.7925 that apply to your closed vent system and control device.
(d) As an alternative to meeting the requirements in paragraph (b) of this section, you may choose to use controls on your container according to the standards for Container Level 3 controls as specified in Sec. 63.924. You must meet the emissions limitations and work practice standards in Sec. 63.7925 that apply to your closed vent system and control device.
(e) As provided in Sec. 63.6(g), you may request approval from the EPA to use an alternative to the work practice standards in this section that apply to your containers. If you request for permission to use an alternative to the work practice standards, you must submit the information described in Sec. 63.6(g)(2).