(a) You must demonstrate continuous compliance with the emissions limitations and work practice standards in Sec. 63.7905 applicable to your affected surface impoundments by meeting the requirements in paragraphs (b) and (c) of this section as applicable to your surface impoundments.
(b) You must demonstrate continuous compliance for each surface impoundment using a floating membrane cover according to Sec. 63.7905(b)(1) by meeting the requirements in paragraphs (b)(1) through (5) of this section.
(1) Operating and maintaining the floating membrane cover and closure devices according to the requirements in Sec. 63.942(c).
(2) Visually inspecting the floating membrane cover and closure devices for defects at least annually according to the requirements in Sec. 63.946(a).
(3) Repairing defects according to the requirements in Sec. 63.946(c).
(4) Recording the information specified in Sec. 63.947(a)(2) and (a)(3).
(5) Keeping records to document compliance with the requirements according to the requirements in Sec. 63.7952.
(c) You must demonstrate continuous compliance for each surface impoundment using a cover vented to a control device according to Sec. 63.7905(b)(2) by meeting the requirements in paragraphs (c)(1) through (6) of this section.
(1) Operating and maintaining the cover and its closure devices according to the requirements in Sec. 63.943(c).
(2) Visually inspecting the cover and its closure devices for defects at least annually according to the requirements in Sec. 63.946(b).
(3) Repairing defects according to the requirements in Sec. 63.946(c).
(4) Recording the information specified in Sec. 63.947(a)(2) and (a)(3).
(5) Meeting each applicable requirement for demonstrating continuous compliance with the emission limitations and work practice standards for a closed vent system and control device in Sec. 63.7928.
(6) Keeping records to document compliance with the requirements according to the requirements in Sec. 63.7952.
Separators