(a) You must meet each requirement in Table 3 to this subpart that applies to your equipment leaks, except as specified in paragraphs (b) through (d) of this section.
(b) Exceptions to requirements in Sec. 63.424(a). (1) When Sec. 63.424(a) refers to ``a bulk gasoline terminal or pipeline breakout station subject to the provisions of this subpart,'' the phrase ``a miscellaneous coating manufacturing affected source subject to 40 CFR part 63, subpart HHHHH'' shall apply for the purposes of this subpart.
(2) When Sec. 63.424(a) refers to ``equipment in gasoline service,'' the phrase ``equipment in organic HAP service'' shall apply for the purposes of this subpart.
(3) When Sec. 63.424(a) specifies that ``each piece of equipment shall be inspected during loading of a gasoline cargo tank,'' the phrase ``each piece of equipment must be inspected when it is operating in organic HAP service'' shall apply for the purposes of this subpart.
(4) Equipment in service less than 300 hours per year, equipment in vacuum service, or equipment contacting non-process fluids is excluded from this section.
(c) When Sec. 63.1036 refers to batch processes, any part of the miscellaneous coating manufacturing operations applies for the purposes of this subpart.
(d) For the purposes of this subpart, pressure testing for leaks in accordance with Sec. 63.1036(b) is not required after reconfiguration of an equipment train if flexible hose connections are the only disturbed equipment. [68 FR 69185, Dec. 11, 2003, as amended at 70 FR 25681, May 13, 2005]