(a) Except as provided in paragraph (b) of this section, the requirements of this subpart apply to the owner or operator of each new pitch storage tank and new or existing potline, paste production plant, or anode bake furnace associated with primary aluminum production and located at a major source as defined in Sec. 63.2.
(b) The requirements of this subpart do not apply to any existing anode bake furnace that is not located on the same site as a primary aluminum reduction plant. The owner or operator shall comply with the State MACT determination established by the applicable regulatory authority.
(c) An owner or operator of an affected facility (potroom group or anode bake furnace) under Sec. 60.190 of this chapter may elect to comply with either the requirements of Sec. 63.845 of this subpart or the requirements of subpart S of part 60 of this chapter.