(a) Each owner or operator shall prepare and maintain the following records:
(1) Documentation describing the floating membrane cover or cover design, as applicable to the surface impoundment.
(2) A record for each inspection required by Sec. 63.946 of this subpart that includes the following information: a surface impoundment identification number (or other unique identification description as selected by the owner or operator) and the date of inspection.
(3) The owner or operator shall record for each defect detected during inspections required by Sec. 63.946 of this subpart the following information: the location of the defect, a description of the defect, the date of detection, and corrective action taken to repair the defect. In the event that repair of the defect is delayed in accordance with the provisions of Sec. 63.946(c)(2) of this section, the owner or operator shall also record the reason for the delay and the date that completion of repair of the defect is expected.
(b) Owners and operators that use a surface impoundment equipped with a fixed-roof and vented through a closed-vent system to a control device in accordance with the provisions of Sec. 63.943 of this subpart shall prepare and maintain the records required for the closed-vent system and control device in accordance with the requirements of Sec. 63.693 in 40 CFR part 63, subpart DD--National Emission Standards for Hazardous Air Pollutant Standards from Off-Site Waste and Recovery Operations.