(a) Beginning with the 1995 averaging period, and for each subsequent averaging period, any refiner for each refinery or group of refineries at which any conventional gasoline is produced, and any importer that imports any conventional gasoline, shall submit to the Administrator a report which contains the following information:
(1) The total gallons of conventional gasoline produced or imported;
(2)-(3) [Reserved]
(4)(i) If using the simple model:
(i) If using the simple model:
(A) The applicable exhaust benzene emissions standard under Sec. 80.101(b)(1)(i);
(B) The average exhaust benzene emissions under Sec. 80.101(g);
(C) The applicable sulfur content standard under Sec. 80.101(b)(1)(ii) in parts per million;
(D) The average sulfur content under Sec. 80.101(g) in parts per million;
(E) The difference between the applicable sulfur content standard under Sec. 80.101(b)(1)(ii) in parts per million and the average sulfur content under paragraph (a)(4)(i)(D) of this section in parts per million, indicating whether the average is greater or lesser than the applicable standard;
(F) The applicable olefin content standard under Sec. 80.101(b)(1)(iii) in volume percent;
(G) The average olefin content under Sec. 80.101(g) in volume percent;
(H) The difference between the applicable olefin content standard under Sec. 80.101(b)(1)(iii) in volume percent and the average olefin content under paragraph (a)(4)(i)(G) of this section in volume percent, indicating whether the average is greater or lesser than the applicable standard;
(I) The applicable T90 distillation point standard under Sec. 80.101(b)(1)(iv) in degrees Fahrenheit;
(J) The average T90 distillation point under Sec. 80.101(g) in degrees Fahrenheit; and
(K) The difference between the applicable T90 distillation point standard under Sec. 80.101(b)(1)(iv) in degrees Fahrenheit and the average T90 distillation point under paragraph (a)(4)(i)(J) of this section in degrees Fahrenheit, indicating whether the average is greater or lesser than the applicable standard.
(ii) If using the optional complex model, the applicable exhaust benzene emissions standard and the average exhaust benzene emissions, under Sec. 80.101(b)(2) and (g).
(iii) If using the complex model:
(A) The applicable exhaust toxics emissions standard and the average exhaust toxics emissions, under Sec. 80.101(b)(3) and (g); and
(B) The applicable NOX emissions standard and the average NOX emissions, under Sec. 80.101(b)(3) and (g).
(5) All the following information for each batch of conventional gasoline or batch of blendstock included under paragraph (a) of this section:
(i) The batch number.
(ii) The date of production.
(iii) The volume of the batch.
(iv) The grade of gasoline produced (i.e., premium, mid-grade, or regular).
(v) The properties, along with identification of the test method used to measure those properties, pursuant to Sec. 80.101(i).
(vi) In the case of any previously certified gasoline used in a refinery operation under the terms of Sec. 80.101(g)(9), all the following information relative to the previously certified gasoline when received at the refinery:
(A) Identification of the previously certified gasoline as such.
(B) The batch number assigned by the receiving refinery.
(C) The date of receipt.
(D) The volume, properties (along with identification of the test method used to measure those properties), and designation of the batch.
(vii) In the case of butane blended with conventional gasoline under Sec. 80.82, all the following:
(A) Identification of the butane batch as complying with the provisions of Sec. 80.82.
(B) Identification of the butane batch as commercial or non-commercial grade butane.
(C) The batch number of the butane.
(D) The date of production of the gasoline produced using the butane.
(E) The volume of the butane batch.
(F) The properties of the butane batch specified by the butane supplier, along with identification of the test method used to measure those properties, or the properties specified in Sec. 80.82(c) or (d), as appropriate.
(G) Where butane is blended with conventional gasoline during the period May 1 through September 15, the Reid vapor pressure, along with identification of the test method used to measure Reid vapor pressure (per Sec. 80.46 through December 31, 2015 and Sec. 80.47 beginning January 1, 2016);
(viii) In the case of pentane blended with conventional gasoline under Sec. 80.85, all the following:
(A) Identification of the pentane batch as complying with the provisions of Sec. Sec. 80.85 and 80.86.
(B) Identification of the pentane batch as blender-commercial grade or blender-non-commercial grade pentane.
(C) The batch number of the pentane.
(D) The date of production of the gasoline produced using the pentane.
(E) The volume of the pentane batch.
(F) The properties of the pentane batch specified by the pentane supplier, or the properties specified in Sec. 80.85(c) or (d), as appropriate.
(G) Where pentane is blended with conventional gasoline during the period May 1 through September 15, the Reid vapor pressure, as measured using the appropriate test method in Sec. 80.46 or Sec. 80.47, as applicable.
(ix) In the case of any imported GTAB, identification of the gasoline as GTAB.
(6) Such other information as EPA may require.
(7) For refiners that blend any butane with conventional gasoline under Sec. 80.82, or any pentane with conventional gasoline under the report required under Sec. 80.85, the report described in paragraph (a) of this section must include all the following information for the annual averaging period:
(i) The total volume of butane blended with conventional gasoline.
(ii) The total volume of conventional gasoline produced using butane.
(iii) A statement that the gasoline produced using butane meets all applicable downstream standards that apply to conventional gasoline under this subpart E, along with the test methods used to determine compliance with the downstream standards that apply to conventional gasoline under this subpart E.
(iv) A statement that all butane blended with conventional gasoline at the refinery is included in the volume under paragraph (a)(7)(i) of this section, or a statement that all butane blended with conventional gasoline is included in the refinery's annual average compliance calculations under Sec. 80.101.
(v) The total volume of pentane blended with conventional gasoline.
(vi) The total volume of conventional gasoline produced using pentane.
(vii) A statement that the gasoline produced using pentane meets all applicable downstream standards that apply to conventional gasoline under this subpart E.
(viii) A statement that all pentane blended with conventional gasoline at the refinery is included in the volume under paragraph (a)(7)(v) of this section, or a statement that all pentane blended with conventional gasoline is included in the refinery's annual average compliance calculations under Sec. 80.101.
(b) The reporting requirements of paragraph (a) of this section do not apply in the case of any conventional gasoline or gasoline blendstock that is excluded from a refiner's or importer's compliance calculation pursuant to Sec. 80.101(e).
(c) For each averaging period, each refiner for each refinery and importer shall submit to the Administrator of EPA, by June 1 of each year, a report in accordance with the requirements for the Attest Engagements of Sec. 80.125 through Sec. 80.131.
(d) The report required by paragraph (a) of this section shall be:
(1) Submitted on forms and following procedures specified by the Administrator of EPA;
(2) Submitted to EPA by March 31 each year for the prior calendar year averaging period; and
(3) Signed and certified as correct by the owner or a responsible corporate officer of the refiner or importer. [59 FR 7860, Feb. 16, 1994, as amended at 59 FR 36969, July 20, 1994; 60 FR 65575, Dec. 20, 1995; 66 FR 67108, Dec. 28, 2001; 67 FR 8738, Feb. 26, 2002; 70 FR 74573, Dec. 15, 2005; 79 FR 23647, Apr. 28, 2014]