(a) Recordkeeping and reporting. Any person who produces, imports, exports, transforms, or destroys class II controlled substances must comply with the following recordkeeping and reporting requirements:
(1) Reports required by this section must be mailed to the Administrator within 30 days of the end of the applicable reporting period, unless otherwise specified.
(2) Revisions of reports that are required by this section must be mailed to the Administrator within 180 days of the end of the applicable reporting period, unless otherwise specified.
(3) Records and copies of reports required by this section must be retained for three years.
(4) Quantities of class II controlled substances must be stated in terms of kilograms in reports required by this section.
(5) Reports and records required by this section may be used for purposes of compliance determinations. These requirements are not intended as a limitation on the use of other evidence admissible under the Federal Rules of Evidence. Failure to provide the reports, petitions and records required by this section and to certify the accuracy of the information in the reports, petitions and records required by this section, will be considered a violation of this subpart. False statements made in reports, petitions and records will be considered violations of Section 113 of the Clean Air Act and under 18 U.S.C. 1001.
(b) Producers. Persons (``producers'') who produce class II controlled substances during a control period must comply with the following recordkeeping and reporting requirements:
(1) Reporting--Producers. For each quarter, each producer of a class II controlled substance must provide the Administrator with a report containing the following information:
(i) The quantity (in kilograms) of production of each class II controlled substance used in processes resulting in their transformation by the producer and the quantity (in kilograms) intended for transformation by a second party;
(ii) The quantity (in kilograms) of production of each class II controlled substance used in processes resulting in their destruction by the producer and the quantity (in kilograms) intended for destruction by a second party;
(iii) The expended allowances for each class II controlled substance;
(iv) The producer's total of expended and unexpended production allowances, consumption allowances, export production allowances, and Article 5 allowances at the end of that quarter;
(v) The quantity (in kilograms) of class II controlled substances sold or transferred during the quarter to a person other than the producer for use in processes resulting in their transformation or eventual destruction;
(vi) A list of the quantities and names of class II controlled substances, exported by the producer to a Party to the Protocol, that will be transformed or destroyed and therefore were not produced expending production or consumption allowances;
(vii) For transformation in the U.S. or by a person of another Party, one copy of a transformation verification from the transformer for a specific class II controlled substance and a list of additional quantities shipped to that same transformer for the quarter;
(viii) For destruction in the U.S. or by a person of another Party, one copy of a destruction verification as required in paragraph (e) of this section for a particular destroyer, destroying the same class II controlled substance, and a list of additional quantities shipped to that same destroyer for the quarter;
(ix) In cases where the producer produced class II controlled substances using export production allowances, a list of U.S. entities that purchased those class II controlled substances and exported them to a Party to the Protocol;
(x) In cases where the producer produced class II controlled substances using Article 5 allowances, a list of U.S. entities that purchased those class II controlled substances and exported them to Article 5 countries; and
(xi) A list of the HCFC 141b-exemption allowance holders from whom orders were received and the quantity (in kilograms) of HCFC-141b requested and produced.
(2) Recordkeeping--Producers. Every producer of a class II controlled substance during a control period must maintain the following records:
(i) Dated records of the quantity (in kilograms) of each class II controlled substance produced at each facility;
(ii) Dated records of the quantity (in kilograms) of class II controlled substances produced for use in processes that result in their transformation or for use in processes that result in their destruction;
(iii) Dated records of the quantity (in kilograms) of class II controlled substances sold for use in processes that result in their transformation or for use in processes that result in their destruction;
(iv) Dated records of the quantity (in kilograms) of class II controlled substances produced with export production allowances or Article 5 allowances;
(v) Copies of invoices or receipts documenting sale of class II controlled substances for use in processes that result in their transformation or for use in processes that result in their destruction;
(vi) Dated records of the quantity (in kilograms) of each class II controlled substance used at each facility as feedstocks or destroyed in the manufacture of a class II controlled substance or in the manufacture of any other substance, and any class II controlled substance introduced into the production process of the same class II controlled substance at each facility;
(vii) Dated records of the quantity (in kilograms) of raw materials and feedstock chemicals used at each facility for the production of class II controlled substances;
(viii) Dated records of the shipments of each class II controlled substance produced at each plant;
(ix) The quantity (in kilograms) of class II controlled substances, the date received, and names and addresses of the source of used materials containing class II controlled substances which are recycled or reclaimed at each plant;
(x) Records of the date, the class II controlled substance, and the estimated quantity of any spill or release of a class II controlled substance that equals or exceeds 100 pounds;
(xi) Transformation verification in the case of transformation, or the destruction verification in the case of destruction as required in paragraph (e) of this section showing that the purchaser or recipient of a class II controlled substance, in the U.S. or in another country that is a Party, certifies the intent to either transform or destroy the class II controlled substance, or sell the class II controlled substance for transformation or destruction in cases when allowances were not expended;
(xii) Written verifications from a U.S. purchaser that the class II controlled substance was exported to a Party in accordance with the requirements in this section, in cases where export production allowances were expended to produce the class II controlled substance;
(xiii) Written verifications from a U.S. purchaser that the class II controlled substance was exported to an Article 5 country in cases where Article 5 allowances were expended to produce the class II controlled substance;
(xiv) Written verifications from a U.S. purchaser that HCFC-141b was manufactured for the express purpose of meeting HCFC-141b exemption needs in accordance with information submitted under Sec. 82.16(h), in cases where HCFC-141b exemption allowances were expended to produce the HCFC-141b.
(3) For any person who fails to maintain the records required by this paragraph, or to submit the report required by this paragraph, the Administrator may assume that the person has produced at full capacity during the period for which records were not kept, for purposes of determining whether the person has violated the prohibitions at Sec. 82.15.
(c) Importers. Persons (``importers'') who import class II controlled substances during a control period must comply with the following recordkeeping and reporting requirements:
(1) Reporting--Importers. For each quarter, an importer of a class II controlled substance (including importers of used class II controlled substances) must submit to the Administrator a report containing the following information:
(i) Summaries of the records required in paragraphs (c)(2)(i) through (xvi) of this section for the previous quarter;
(ii) The total quantity (in kilograms) imported of each class II controlled substance for that quarter;
(iii) The commodity code for the class II controlled substances imported, which must be one of those listed in Appendix K to this subpart;
(iv) The quantity (in kilograms) of those class II controlled substances imported that are used class II controlled substances;
(v) The quantity (in kilograms) of class II controlled substances imported for that quarter and totaled by chemical for the control period to date;
(vi) For substances for which EPA has apportioned baseline production and consumption allowances, the importer's total sum of expended and unexpended consumption allowances by chemical as of the end of that quarter;
(vii) The quantity (in kilograms) of class II controlled substances imported for use in processes resulting in their transformation or destruction;
(viii) The quantity (in kilograms) of class II controlled substances sold or transferred during that quarter to each person for use in processes resulting in their transformation or eventual destruction; and
(ix) Transformation verifications showing that the purchaser or recipient of imported class II controlled substances intends to transform those substances or destruction verifications showing that the purchaser or recipient intends to destroy the class II controlled substances (as provided in paragraph (e) of this section).
(x) [Reserved]
(xi) A list of the HCFC 141b-exemption allowance holders from whom orders were received and the quantity (in kilograms) of HCFC-141b requested and imported.
(2) Recordkeeping--Importers. An importer of a class II controlled substance (including used class II controlled substances) must maintain the following records:
(i) The quantity (in kilograms) of each class II controlled substance imported, either alone or in mixtures, including the percentage of each mixture which consists of a class II controlled substance;
(ii) The quantity (in kilograms) of those class II controlled substances imported that are used and the information provided with the petition where a petition is required under paragraph (c)(3) of this section;
(iii) The quantity (in kilograms) of class II controlled substances other than transhipments or used substances imported for use in processes resulting in their transformation or destruction;
(iv) The quantity (in kilograms) of class II controlled substances other than transhipments or used substances imported and sold for use in processes that result in their destruction or transformation;
(v) The date on which the class II controlled substances were imported;
(vi) The port of entry through which the class II controlled substances passed;
(vii) The country from which the imported class II controlled substances were imported;
(viii) The commodity code for the class II controlled substances shipped, which must be one of those listed in Appendix K to this subpart;
(ix) The importer number for the shipment;
(x) A copy of the bill of lading for the import;
(xi) The invoice for the import;
(xii) The quantity (in kilograms) of imports of used class II controlled substances;
(xiii) The U.S. Customs entry form;
(xiv) Dated records documenting the sale or transfer of class II controlled substances for use in processes resulting in their transformation or destruction;
(xv) Copies of transformation verifications or destruction verifications indicating that the class II controlled substances will be transformed or destroyed (as provided in paragraph (e) of this section).
(xvi) Written verifications from a U.S. purchaser that HCFC-141b was imported for the express purpose of meeting HCFC-141b exemption needs in accordance with information submitted under Sec. 82.16(h), and that the quantity will not be resold, in cases where HCFC-141b exemption allowances were expended to import the HCFC-141b.
(3) Petition to import used class II controlled substances and transhipment-Importers. For each individual shipment over 5 pounds of a used class II controlled substance as defined in Sec. 82.3 for which EPA has apportioned baseline production and consumption allowances, an importer must submit directly to the Administrator, at least 40 working days before the shipment is to leave the foreign port of export, the following information in a petition:
(i) The name and quantity (in kilograms) of the used class II controlled substance to be imported;
(ii) The name and address of the importer, the importer ID number, the contact person, and the phone and fax numbers;
(iii) Name, address, contact person, phone number and fax number of all previous source facilities from which the used class II controlled substance was recovered;
(iv) A detailed description of the previous use of the class II controlled substance at each source facility and a best estimate of when the specific controlled substance was put into the equipment at each source facility, and, when possible, documents indicating the date the material was put into the equipment;
(v) A list of the name, make and model number of the equipment from which the material was recovered at each source facility;
(vi) Name, address, contact person, phone number and fax number of the exporter and of all persons to whom the material was transferred or sold after it was recovered from the source facility;
(vii) The U.S. port of entry for the import, the expected date of shipment and the vessel transporting the chemical. If at the time of submitting a petition the importer does not know the U.S. port of entry, the expected date of shipment and the vessel transporting the chemical, and the importer receives a non-objection notice for the individual shipment in the petition, the importer is required to notify the Administrator of this information prior to the actual U.S. Customs entry of the individual shipment;
(viii) A description of the intended use of the used class II controlled substance, and, when possible, the name, address, contact person, phone number and fax number of the ultimate purchaser in the United States;
(ix) The name, address, contact person, phone number and fax number of the U.S. reclamation facility, where applicable;
(x) If someone at the source facility recovered the class II controlled substance from the equipment, the name and phone and fax numbers of that person;
(xi) If the imported class II controlled substance was reclaimed in a foreign Party, the name, address, contact person, phone number and fax number of any or all foreign reclamation facility(ies) responsible for reclaiming the cited shipment;
(xii) An export license from the appropriate government agency in the country of export and, if recovered in another country, the export license from the appropriate government agency in that country;
(xiii) If the imported used class II controlled substance is intended to be sold as a refrigerant in the U.S., the name and address of the U.S. reclaimer who will bring the material to the standard required under subpart F of this part, if not already reclaimed to those specifications; and
(xiv) A certification of accuracy of the information submitted in the petition.
(4) Review of petition to import used class II controlled substances and transhipments--Importers. Starting on the first working day following receipt by the Administrator of a petition to import a used class II controlled substance, the Administrator will initiate a review of the information submitted under paragraph (c)(3) of this section and take action within 40 working days to issue either an objection-notice or a non-objection notice for the individual shipment to the person who submitted the petition to import the used class II controlled substance.
(i) The Administrator may issue an objection notice to a petition for the following reasons:
(A) If the Administrator determines that the information is insufficient, that is, if the petition lacks or appears to lack any of the information required under paragraph (c)(3) of this section;
(B) If the Administrator determines that any portion of the petition contains false or misleading information, or the Administrator has information from other U.S. or foreign government agencies indicating that the petition contains false or misleading information;
(C) If the transaction appears to be contrary to provisions of the Vienna Convention on Substances that Deplete the Ozone Layer, the Montreal Protocol and Decisions by the Parties, or the non-compliance procedures outlined and instituted by the Implementation Committee of the Montreal Protocol;
(D) If the appropriate government agency in the exporting country has not agreed to issue an export license for the cited individual shipment of used class II controlled substance;
(E) If reclamation capacity is installed or is being installed for that specific class II controlled substance in the country of recovery or country of export and the capacity is funded in full or in part through the Multilateral Fund.
(ii) Within ten (10) working days after receipt of the objection notice, the importer may re-petition the Administrator, only if the Administrator indicated ``insufficient information'' as the basis for the objection notice. If no appeal is taken by the tenth working day after the date on the objection notice, the objection shall become final. Only one re-petition will be accepted for any original petition received by EPA.
(iii) Any information contained in the re-petition which is inconsistent with the original petition must be identified and a description of the reason for the inconsistency must accompany the re-petition.
(iv) In cases where the Administrator does not object to the petition based on the criteria listed in paragraph (c)(4)(i) of this section, the Administrator will issue a non-objection notice.
(v) To pass the approved used class II controlled substances through U.S. Customs, the petition and the non-objection notice issued by EPA must accompany the shipment through U.S. Customs.
(vi) If for some reason, following EPA's issuance of a non-objection notice, new information is brought to EPA's attention which shows that the non-objection notice was issued based on false information, then EPA has the right to:
(A) Revoke the non-objection notice;
(B) Pursue all means to ensure that the class II controlled substance is not imported into the U.S.; and
(C) Take appropriate enforcement actions.
(vii) Once the Administrator issues a non-objection notice, the person receiving the non-objection notice is permitted to import the individual shipment of used class II controlled substance only within the same control period as the date stamped on the non-objection notice.
(viii) A person receiving a non-objection notice from the Administrator for a petition to import used class II controlled substances must maintain the following records:
(A) A copy of the petition;
(B) The EPA non-objection notice;
(C) The bill of lading for the import; and
(D) U.S. Customs entry documents for the import that must include one of the commodity codes from Appendix K to this subpart.
(5) Recordkeeping for transhipments--Importers. Any person who tranships a class II controlled substance must maintain records that indicate:
(i) That the class II controlled substance shipment originated in a foreign country;
(ii) That the class II controlled substance shipment is destined for another foreign country; and
(iii) That the class II controlled substance shipment will not enter interstate commerce within the U.S.
(d) Exporters. Persons (``exporters'') who export class II controlled substances during a control period must comply with the following reporting requirements:
(1) Reporting--Exporters. For any exports of class II controlled substances not reported under Sec. 82.20 (additional consumption allowances), or under paragraph (b)(2) of this section (reporting for producers of class II controlled substances), each exporter who exported a class II controlled substance must submit to the Administrator the following information within 30 days after the end of each quarter in which the unreported exports left the U.S.:
(i) The names and addresses of the exporter and the recipient of the exports;
(ii) The exporter's Employer Identification Number;
(iii) The type and quantity (in kilograms) of each class II controlled substance exported and what percentage, if any of the class II controlled substance is used;
(iv) The date on which, and the port from which, the class II controlled substances were exported from the U.S. or its territories;
(v) The country to which the class II controlled substances were exported;
(vi) The quantity (in kilograms) exported to each Article 5 country;
(vii) The commodity code for the class II controlled substances shipped, which must be one of those listed in Appendix K to this subpart;
(viii) For persons reporting transformation or destruction, the invoice or sales agreement containing language similar to the transformation verifications that the purchaser or recipient of imported class II controlled substances intends to transform those substances, or destruction verifications showing that the purchaser or recipient intends to destroy the class II controlled substances (as provided in paragraph (e) of this section).
(2) Reporting export production allowances--Exporters. In addition to the information required in paragraph (d)(1) of this section, any exporter using export production allowances must also provide the following to the Administrator:
(i) The Employer Identification Number on the Shipper's Export Declaration Form or Employer Identification Number of the shipping agent shown on the U.S. Customs Form 7525;
(ii) The exporting vessel on which the class II controlled substances were shipped; and
(iii) The quantity (in kilograms) exported to each Party.
(3) Reporting Article 5 allowances--Exporters. In addition to the information required in paragraph (d)(1) of this section, any exporter using Article 5 allowances must also provide the following to the Administrator:
(i) The Employer Identification Number on the Shipper's Export Declaration Form or Employer Identification Number of the shipping agent shown on the U.S. Customs Form 7525; and
(ii) The exporting vessel on which the class II controlled substances were shipped.
(4) Reporting used class II controlled substances--Exporters. Any exporter of used class II controlled substances must indicate on the bill of lading or invoice that the class II controlled substance is used, as defined in Sec. 82.3.
(e) Transformation and destruction. Any person who transforms or destroys class II controlled substances must comply with the following recordkeeping and reporting requirements:
(1) Recordkeeping--Transformation and destruction. Any person who transforms or destroys class II controlled substances produced or imported by another person must maintain the following:
(i) Copies of the invoices or receipts documenting the sale or transfer of the class II controlled substances to the person;
(ii) Records identifying the producer or importer of the class II controlled substances received by the person;
(iii) Dated records of inventories of class II controlled substances at each plant on the first day of each quarter;
(iv) Dated records of the quantity (in kilograms) of each class II controlled substance transformed or destroyed;
(v) In the case where class II controlled substances were purchased or transferred for transformation purposes, a copy of the person's transformation verification as provided under paragraph (e)(3)of this section.
(vi) Dated records of the names, commercial use, and quantities (in kilograms) of the resulting chemical(s) when the class II controlled substances are transformed; and
(vii) Dated records of shipments to purchasers of the resulting chemical(s) when the class II controlled substances are transformed.
(viii) In the case where class II controlled substances were purchased or transferred for destruction purposes, a copy of the person's destruction verification, as provided under paragraph (e)(5) of this section.
(2) Reporting--Transformation and destruction. Any person who transforms or destroys class II controlled substances and who has submitted a transformation verification ((paragraph (e)(3) of this section) or a destruction verification (paragraph (e)(5) of this section) to the producer or importer of the class II controlled substances, must report the following:
(i) The names and quantities (in kilograms) of the class II controlled substances transformed for each control period within 45 days of the end of such control period; and
(ii) The names and quantities (in kilograms) of the class II controlled substances destroyed for each control period within 45 days of the end of such control period.
(3) Reporting--Transformation. Any person who purchases class II controlled substances for purposes of transformation must provide the producer or importer with a transformation verification that the class II controlled substances are to be used in processes that result in their transformation.
(i) The transformation verification shall include the following:
(A) Identity and address of the person intending to transform the class II controlled substances;
(B) The quantity (in kilograms) of class II controlled substances intended for transformation;
(C) Identity of shipments by purchase order number(s), purchaser account number(s), by location(s), or other means of identification;
(D) Period of time over which the person intends to transform the class II controlled substances; and
(E) Signature of the verifying person.
(ii) [Reserved]
(4) Reporting--Destruction. Any person who destroys class II controlled substances shall provide EPA with a one-time report containing the following information:
(i) The destruction unit's destruction efficiency;
(ii) The methods used to record the volume destroyed;
(iii) The methods used to determine destruction efficiency;
(iv) The name of other relevant federal or state regulations that may apply to the destruction process;
(v) Any changes to the information in paragraphs (e)(4)(i), (ii), and (iii) of this section must be reflected in a revision to be submitted to EPA within 60 days of the change(s).
(5) Reporting--Destruction. Any person who purchases or receives and subsequently destroys class II controlled substances that were originally produced without expending allowances shall provide the producer or importer from whom it purchased or received the class II controlled substances with a verification that the class II controlled substances will be used in processes that result in their destruction.
(i) The destruction verification shall include the following:
(A) Identity and address of the person intending to destroy class II controlled substances;
(B) Indication of whether those class II controlled substances will be completely destroyed, as defined in Sec. 82.3, or less than completely destroyed, in which case the destruction efficiency at which such substances will be destroyed must be included;
(C) Period of time over which the person intends to destroy class II controlled substances; and
(D) Signature of the verifying person.
(ii) [Reserved]
(f) Heels-Recordkeeping and reporting. Any person who brings into the U.S. a rail car, tank truck, or ISO tank containing a heel, as defined in Sec. 82.3, of class II controlled substances, must take the following actions:
(1) Indicate on the bill of lading or invoice that the class II controlled substance in the container is a heel.
(2) Report within 30 days of the end of the control period the quantity (in kilograms) brought into the U.S. and certify:
(i) That the residual quantity (in kilograms) in each shipment is no more than 10 percent of the volume of the container;
(ii) That the residual quantity (in kilograms) in each shipment will either:
(A) Remain in the container and be included in a future shipment;
(B) Be recovered and transformed;
(C) Be recovered and destroyed; or
(D) Be recovered for a non-emissive use.
(3) Report on the final disposition of each shipment within 30 days of the end of the control period.
(g) HCFC 141b exemption allowances--Reporting and recordkeeping. (1) Any person allocated HCFC-141b exemption allowances who confers a quantity of the HCFC-141b exemption allowances to a producer or import and places an order for the production or import of HCFC-141b with a verification that the HCFC-141b will only be used for the exempted purpose and not be resold must submit semi-annual reports, due 30 days after the end of the second and fourth respectively, to the Administrator containing the following information:
(1) Any person allocated HCFC-141b exemption allowances who confers a quantity of the HCFC-141b exemption allowances to a producer or import and places an order for the production or import of HCFC-141b with a verification that the HCFC-141b will only be used for the exempted purpose and not be resold must submit semi-annual reports, due 30 days after the end of the second and fourth respectively, to the Administrator containing the following information:
(i) Total quantity (in kilograms) HCFC-141b received during the 6 month period; and
(ii) The identity of the supplier of HCFC-141b on a shipment-by-shipment basis during the 6 month period.
(2) Any person allocated HCFC-141b exemption allowances must keep records of letters to producers and importers conferring unexpended HCFC-141b exemption allowances for the specified control period in the notice, orders for the production or import of HCFC-141b under those letters and written verifications that the HCFC-141b was produced or imported for the express purpose of meeting HCFC-141b exemption needs in accordance with information submitted under Sec. 82.16(h), and that the quantity will not be resold. [68 FR 2848, Jan. 21, 2003, as amended at 71 FR 41172, July 20, 2006]
Sec. Appendix A to Subpart A of Part 82--Class I Controlled Substances ------------------------------------------------------------------------
Class 1 controlled substances ODP------------------------------------------------------------------------A. Group I:
CFCl3-Trichlorofluoromethane (CFC-ll)...................... 1.0
CF2 Cl2-Dichlorofifluoromethane (CFC-12)................... 1.0
C2 F3 Cl3-Trichlorotrifluoroethane (CFC-113)............... 0.8
C2 F4 Cl2-Dichlorotetrafluoroethane (CFC-114).............. 1.0
C2 F5 Cl-Monochloropentafluoroethane (CFC-115)............. 0.6
All isomers of the above chemicalsB. Group II:
CF2 ClBr-Bromochlorodifluoromethane (Halon-1211)........... 3.0
CF3 Br-Bromotrifluoromethane (Halon-1301).................. 10.0
C2 F4 Br2-Dibromotetrafluoroethane (Halon-2402)............ 6.0
All isomers of the above chemicalsC. Group III:
CF3 Cl-Chlorotrifluoromethane (CFC-13)..................... 1.0
C2 FCl5-(CFC-111).......................................... 1.0
C2 F2 Cl4-(CFC-112)........................................ 1.0
C3 FCl7-(CFC-211).......................................... 1.0
C3 F2 Cl6-(CFC-212)........................................ 1.0
C3 F3 Cl5-(CFC-213)........................................ 1.0
C3 F4 Cl4-(CFC-214)........................................ 1.0
C3 F5 Cl3-(CFC-215)........................................ 1.0
C3 F6 Cl2-(CFC-216)........................................ 1.0
C3 F7 Cl-(CFC-217)......................................... 1.0
All isomers of the above chemicalsD. Group IV: CCl4-Carbon Tetrachloride....................... 1.1E. Group V:
C2 H3 Cl3-1,1,1 Trichloroethane (Methyl chloroform)........ 0.1
All isomers of the above chemical except 1,1,2-
trichloroethaneF. Group VI: CH3 Br--Bromomethane (Methyl Bromide)........... 0.7G. Group VII:
CHFBR2..................................................... 1.00
CHF2 Br (HBFC-2201)........................................ 0.74
CH2 FBr.................................................... 0.73
C2 HFBr4................................................... 0.3-0.8
C2 HF2 Br3................................................. 0.5-1.8
C2 HF3 Br2................................................. 0.4-1.6
C2 HF4 Br.................................................. 0.7-1.2
C2 H2 FBr3................................................. 0.1-1.1
C2 H2 F2 Br2............................................... 0.2-1.5
C2 H2 F3 Br................................................ 0.7-1.6
C2 H2 FBr2................................................. 0.1-1.7
C2 H3 F2 Br................................................ 0.2-1.1
C2 H4 FBr.................................................. 0.07-0.1
C3 HFBr6................................................... 0.3-1.5
C3 HF2 Br5................................................. 0.2-1.9
C3 HF3 Br4................................................. 0.3-1.8
C3 HF4 Br3................................................. 0.5-2.2
C3 HF5 Br2................................................. 0.9-2.0
C3 HF6 Br.................................................. 0.7-3.3
C3 H2 FBR5................................................. 0.1-1.9
C3 H2 F2 BR4............................................... 0.2-2.1
C3 H2 F3 Br3............................................... 0.2-5.6
C3 H2 F4 Br2............................................... 0.3-7.5
C3 H2 F5 BR................................................ 0.9-14
C3 H3 FBR4................................................. 0.08-1.9
C3 H3 F2 Br3............................................... 0.1-3.1
C3 H3 F3 Br2............................................... 0.1-2.5
C3 H3 F4 Br................................................ 0.3-4.4
C3 H4 FBr3................................................. 0.03-0.3
C3 H4 F2 Br2............................................... 0.1-1.0
C3 H4 F3 Br................................................ 0.07-0.8
C3 H5 FBr2................................................. 0.04-0.4
C3 H5 F2 Br................................................ 0.07-0.8
C3 H6 FB................................................... 0.02-0.7H. Group VIII:
CH2BrCl (Chlorobromomethane 0.12...........................------------------------------------------------------------------------ [60 FR 24986, May 10, 1995, as amended at 68 FR 42892, July 18, 2003]
Appendix B to Subpart A of Part 82--Class II Controlled Substances \a\
\b\ ------------------------------------------------------------------------
Controlled substance ODP------------------------------------------------------------------------1. HCFC-21 (CHFCl2) Dichlorofluoromethane............... 0.042. HCFC-22 (CHF2Cl) Monochlorodifluoromethane........... 0.0553. HCFC-31 (CH2FCl) Monochlorofluoromethane............. 0.024. HCFC-121 (C2HFCl4) Tetrachlorofluoroethane........... 0.01-0.045. HCFC-122 (C2HF2Cl3) Trichlorodifluoroethane.......... 0.02-0.086. HCFC-123 (C2HF3Cl2) Dichlorotrifluoroethane.......... 0.027. HCFC-124 (C2HF4Cl) Monochlorotetrafluoroethane....... 0.0228. HCFC-131 (C2H2FCl3) Trichlorofluoroethane............ 0.007-0.059. HCFC-132 (C2H2F2Cl2) Dichlorodifluoroethane.......... 0.008-0.0510. HCFC-133 (C2H2F3Cl) Monochlorotrifluoroethane....... 0.02-0.0611. HCFC-141 (C2H3FCl2) Dichlorofluoroethane............ 0.005-0.0712. HCFC-141b (CH3CFCl2) Dichlorofluoroethane........... 0.1113. HCFC-142 (C2H3F2Cl) Chlorodifluoroethane............ 0.008-0.07
14. HCFC-142b (CH3CF2Cl) Monochlorodifluoroethane....... 0.06515. HCFC-151 (C2H4FCl) Chlorofluoroethane............... 0.003-0.00516. HCFC-221 (C3HFCl6) Hexachlorofluoropropane.......... 0.015-0.0717. HCFC-222 (C3HF2Cl5) Pentachlorodifluoropropane...... 0.01-0.0918. HCFC-223 (C3HF3Cl4) Tetrachlorotrifluoropropane..... 0.01-0.0819. HCFC-224 (C3HF4Cl3) Trichlorotetrafluoropropane..... 0.01-0.0920. HCFC-225 (C3HF5Cl2) Dichloropentafluoropropane...... 0.02-0.0721. HCFC-225ca (CF3CF2CHCl2) Dichloropentafluoropropane. 0.02522. HCFC-225cb (CF2ClCF2CHClF) 0.033
Dichloropentafluoropropane.............................23. HCFC-226 (C3HF6Cl) Monochlorohexafluoropropane...... 0.02-0.124. HCFC-231 (C3H2FCl5) Pentachlorofluoropropane........ 0.05-0.0925. HCFC-232 (C3H2F2Cl4) Tetrachlorodifluoropropane..... 0.008-0.126. HCFC-233 (C3H2F3Cl3) Trichlorotrifluoropropane...... 0.007-0.2327. HCFC-234 (C3H2F4Cl2) Dichlorotetrafluoropropane..... 0.01-0.2828. HCFC-235 (C3H2F5Cl) Monochloropentafluoropropane.... 0.03-0.5229. HCFC-241 (C3H3FCl4) Tetrachlorofluoropropane........ 0.004-0.0930. HCFC-242 (C3H3F2Cl3) Trichlorodifluoropropane....... 0.005-0.1331. HCFC-243 (C3H3F3Cl2) Dichlorotrifluoropropane....... 0.007-0.1232. HCFC-244 (C3H3F4Cl) Monochlorotetrafluoropropane.... 0.009-0.1433. HCFC-251 (C3H4FCl3) Monochlorotetrafluoropropane.... 0.001-0.0134. HCFC-252 (C3H4F2Cl2) Dichlorodifluoropropane........ 0.005-0.0435. HCFC-253 (C3H4F3Cl) Monochlorotrifluoropropane...... 0.003-0.0336. HCFC-261 (C3H5FCl2) Dichlorofluoropropane........... 0.002-0.0237. HCFC-262 (C3H5F2Cl) Monochlorodifluoropropane....... 0.002-0.0238. HCFC-271 (C3H6FCl) Monochlorofluoropropane.......... 0.001-0.03------------------------------------------------------------------------\a\ According to Annex C of the Montreal Protocol, ``Where a range of
ODPs is indicated, the highest value in that range shall be used for
the purposes of the Protocol. The ODPs listed as single value have
been determined from calculations based on laboratory measurements.
Those listed as a range are based on estimates and are less certain.
The range pertains to an isomeric group. The upper value is the
estimate of the ODP of the isomer with the highest ODP, and the lower
value is the estimate of the ODP of the isomer with the lowest ODP.\b\ This table includes all isomers of the substances above, regardless
of whether the isomer is explicitly listed on its own. [79 FR 64288, Oct. 28, 2014]
Sec. Appendix C to Subpart A of Part 82 [Reserved]
Sec. Appendix D to Subpart A of Part 82--Harmonized Tariff Schedule
Description of Products That May Contain Controlled Substances in
Appendix A, Class I, Groups I and II
This appendix is based on information provided by the Ozone Secretariat of the United Nations Ozone Environment Programme.** The Appendix lists available U.S. harmonized tariff schedule codes identifying headings and subheadings for Annex D products that may contain controlled substances.---------------------------------------------------------------------------
** ``A Note Regarding the Harmonized System Code Numbers for the Products Listed in Annex D.'' Adopted by Decision IV/15 paragraph 3, of the Fourth Meeting of the Parties in Copenhagen, 23-25 November, 1992.---------------------------------------------------------------------------
The Harmonized Tariff Schedule of the United States uses an enumeration system to identify products imported and exported to and from the U.S. This system relies on a four digit heading, a four digit subheading and additional two digit statistical suffix to characterize products. The United States uses the suffix for its own statistical records and analyses. This Appendix lists only headings and subheadings.
While some can be readily associated with harmonized system codes, many products cannot be tied to HS classifications unless their exact composition and the presentation are known. It should be noted that the specified HS classifications represent the most likely headings and subheadings which may contain substances controlled by the Montreal Protocol. The codes given should only be used as a starting point; further verfication is needed to ascertain whether or not the products actually contain controlled substances.
Category 1. Automobile and Truck Air Conditioning Units (whether
incorporated in vehicles or not)
There are no separate code numbers for air conditioning units specially used in automobiles and trucks. Although a code has been proposed for car air conditioners, it is not yet officially listed in the Harmonized Tariff Schedule (see category 2). The following codes apply to the vehicles potentially containing air conditioning units.
Heading/Subheading Article Description
8701.(10, 20, 30, 90)***............................... Tractors.8702................................................... Public-transport type passenger motor vehicles.8702.10................................................ With compression-ignition internal-combustion piston
engine (diesel or semi-diesel).8702.90................................................ Other.8703................................................... Motor cars and other motor vehicles principally
designed for the transport of persons (other than
those of heading 8702), including station wagons and
racing cars.8703.10................................................ Vehicles specially designed for traveling on snow; golf
carts and similar vehicles; includes subheading 10.10
and 10.50.8703.(21, 22, 23, 24).................................. Other vehicles, with spark-ignition internal combustion
reciprocating engines.8703.(31, 32, 33, 90).................................. Other vehicles, with compression-ignition internal
combustion piston engine (diesel or semi-diesel).8704................................................... Motor vehicles for the transport of goods.8704.10.(10, 50)....................................... Dumpers designed for off-highway use.8704.(21, 22, 23)...................................... Other, with compression-ignition internal combustion
piston engine (diesel or semi-diesel).8704.(31, 32, 90)...................................... Other, with compression-ignition internal combustion
piston engine.8705................................................... Special purpose motor vehicles, other than those
principally designed for the transport of persons or
goods (for example, wreckers, mobile cranes, fire
fighting vehicles, concrete mixers, road sweepers,
spraying vehicles, mobile workshops, mobile
radiological units).8705.10................................................ Crane lorries.8705.20................................................ Mobile drilling derricks.8705.30................................................ Fire fighting vehicles.8705.90................................................ Other.
***At this time vehicle air conditioning units are considered components of vehicles or are classified under the
general category for air conditioning and refrigeration equipment. Vehicles containing air conditioners are
therefore considered products containing controlled substances.
Category 2. Domestic and Commercial Refrigeration and Air Conditioning/
Heat Pump Equipment
Domestic and commercial air conditioning and refrigeration equipment fall primarily under headings 8415 and 8418.
Heading/Subheading Article Description
8415................................................... Air conditioning machines, comprising a motor-driven
fan and elements for changing the temperature and
humidity, including those machines in which the
humidity cannot be separately regulated.8415.20................................................ Proposed code for air conditioning of a kind used for
persons, in motor vehicles.8415.10.00............................................. A/C window or wall types, self-contained.8415.81.00............................................. Other, except parts, incorporating a refrigerating unit
and a valve for reversal of the cooling/heat cycle.8415.82.00............................................. Other, incorporating a refrigerating unit--
Self-contained machines and remote condenser type
air conditioners (not for year-round use).
Year-round units (for heating and cooling).
Air Conditioning evaporator coils.
Dehumidifiers.
Other air conditioning machines incorporating a
refrigerating unit.8415.83................................................ Automotive air conditioners.8418................................................... Refrigerators, freezers and other refrigerating or
freezing equipment, electric or other; heat pumps,
other than air conditioning machines of heading 8415;
parts thereof.8418.10.00............................................. Combined refrigerator-freezers, fitted with separate
external doors.
8418.21.00............................................. Refrigerators, household type, Compression type.8418.22.00............................................. Absorption type, electrical.8418.29.00............................................. Other.8418.30.00............................................. Freezers of the chest type.8418.40................................................ Freezers of the upright type.8418.50.0040........................................... Other refrigerating or freezing chests, cabinets,
display counters, showcases and similar refrigerating
or freezing furniture.8418.61.00............................................. Other refrigerating or freezing equipment; heat pumps.8418.69................................................ Other--
Icemaking machines.
Drinking water coolers, self-contained.
Soda fountain and beer dispensing equipment.
Centrifugal liquid chilling refrigerating units.
Absorption liquid chilling units.
Reciprocating liquid chilling units.
Other refrigerating or freezing equipment (household
or other).8479.89.10............................................. Dehumidifiers (other than those under 8415 or 8424
classified as ``machines and mechanical appliances
having individual functions, not specified or included
elsewhere'').
Category 3. Aerosol Products
An array of different products use controlled substances as aerosols and in aerosol applications. Not all aerosol applications use controlled substances, however. The codes given below represent the most likely classifications for products containing controlled substances. The product codes listed include ****:---------------------------------------------------------------------------
**** Other categories of products that may contain controlled substances are listed below. EPA is currently working to match them with appropriate codes. They include: coatings and electronic equipment (e.g., electrical motors), coatings or cleaning fluids for aircraft maintenance, mold release agents (e.g. for production of plastic or elastomeric materials), water and oil repellant (potentially under HS 3402), spray undercoats (potentially under ``paints and varnishes''), spot removers, brake cleaners, safety sprays (e.g., mace cans), animal repellant, noise horns (e.g., for use on boats), weld inspection developers, freezants, gum removers, intruder alarms, tire inflators, dusters (for electronic and non-electronic applications), spray shoe polish, and suede protectors. varnishes perfumes preparations for use on hair preparations for oral and dental hygiene shaving preparations personal deodorants, bath preparations prepared room deodorizers soaps lubricants polishes and creams explosives insecticides, fungicides, herbicides, disinfectants arms and ammunition household products such as footwear or leather polishes other miscellaneous products
Heading/Subheading Article Description
3208................................................... Paints and varnishes ***** (including enamels and
lacquers) based on synthetic polymers of chemically
modified natural polymers, dispersed or dissolved in a
non-aqueous medium.3208.10................................................ Based on polyesters.3208.20................................................ Based on acrylic or vinyl polymers.3208.90................................................ Other.3209................................................... Paints and varnishes (including enamels and lacquers)
based on synthetic polymers or chemically modified
natural polymers, dispersed or dissolved in an aqueous
medium.3209.10................................................ Based on acrylic or vinyl polymers.3209.90................................................ Other.
3210.00................................................ Other paints and varnishes (including enamels, lacquers
and distempers) and prepared water pigments of a kind
used for finishing leather.3212.90................................................ Dyes and other coloring matter put up in forms or
packings for retail sale.3303.00................................................ Perfumes and toilet waters.3304.30................................................ Manicure or pedicure preparations.3305.10................................................ Shampoos.3305.20................................................ Preparations for permanent waving or straightening.3305.30................................................ Hair lacquers.3305.90................................................ Other hair preparations.3306.10................................................ Dentrifices.3306.90................................................ Other dental (this may include breath sprays).3307.10................................................ Pre-shave, shaving or after-shave preparations.3307.20................................................ Personal deodorants and antiperspirants.3307.30................................................ Perfumed bath salts and other bath preparations.3307.49................................................ Other (this may include preparations for perfuming or
deodorizing rooms, including odoriferous preparations
used during religious rites, whether or not perfumed
or having disinfectant properties).3307.90................................................ Other (this may include depilatory products and other
perfumery, cosmetic or toilet preparations, not
elsewhere specified or included)3403................................................... Lubricating preparations (including cutting-oil
preparations, bolt or nut release preparations, anti-
rust or anti-corrosion preparations and mould release
preparations, based on lubricants), and preparations
of a kind used for the oil or grease treatment of
textile materials, leather, fur skins or other
materials, but excluding preparations containing, as
basic constituents, 70 percent or more by weight of
petroleum oils or of oils obtained from bituminous
minerals.3402................................................... Organic surface-active agents (other than soap);
surface-active preparations, washing preparations and
cleaning operations, whether or not containing soap,
other than those of 3401.3402.20................................................ Preparations put up for retail sale.3402.19................................................ Other preparations containing petroleum oils or oils
obtained from bituminous minerals.3403................................................... Lubricating preparations consisting of mixtures
containing silicone greases or oils, as the case may
be.2710.00................................................ Preparations not elsewhere specified or included,
containing by weight 70 percent or more of petroleum
oils or of oils obtained from bituminous minerals,
these oils being the basic constituents of the
preparations.3403.11................................................ Lubricants containing petroleum oils or oils obtained
from bituminous minerals used for preparations from
the treatment of textile materials, leather, fur skins
or other materials.3403.19................................................ Other preparations containing petroleum oils or oils
obtained from bituminous minerals.3405................................................... Polishes and creams, for footwear, furniture, floors,
coachwork, glass or metal, scouring pastes and powders
and similar preparations excluding waxes of heading
3404.3405.10................................................ Polishes and creams for footwear or leather.3405.20................................................ Polishes for wooden furniture, floors or other
woodwork.36..................................................... Explosives.3808................................................... Insecticides, rodenticides, fungicides, herbicides,
anti-sprouting products and plant-growth regulators,
disinfectants and similar products, put up in forms or
packings for retail sale or as preparations or
articles (for example, sulphur-treated bands, wicks
and candles, and fly papers).3808.10................................................ Insecticides.
3808.20................................................ Fungicides.3808.30................................................ Herbicides, anti-sprouting products and plant growth
regulators.3808.40................................................ Disinfectants.3808.90................................................ Other insecticides, fungicides.3809.10................................................ Finishing agents, dye carriers to accelerate the dyeing
or fixing of dye-stuffs and other products and
preparations (for example, dressings and mordants) of
a kind used in the textile, paper, leather or like
industries, not elsewhere specified or included, with
a basis of amylaceous substances.3814................................................... Organic composite solvents and thinners (not elsewhere
specified or included) and the prepared paint or
varnish removers.3910................................................... Silicones in primary forms.9304................................................... Other arms (for example, spring, air or gas guns and
pistols, truncheons), excluding those of heading No.
93.07. Thus, aerosol spray cans containing tear gas
may be classified under this subheading.0404.90................................................ Products consisting of natural milk constituents,
whether or not containing added sugar or other
sweetening matter, not elsewhere specified or
included.1517.90................................................ Edible mixtures or preparations of animal or vegetable
fats or oils or of fractions of different fats or oils
of this chapter, other than edible fats or oils or
their fractions of heading No. 15.16.2106.90................................................ Food preparations not elsewhere specified or included.
***** Although paints do not generally use contain controlled substances, some varnishes use CFC 113 and
1,1,1,trichlorethane as solvents.
Category 4. Portable Fire Extinguishers
Heading/Subheading Article Description
8424................................................... Mechanical appliances (whether or not hand operated)
for projecting, dispersing, or spraying liquids or
powders; fire extinguishers whether or not charged,
spray guns and similar appliances; steam or sand
blasting machines and similar jet projecting machines.8424.10................................................ Fire extinguishers, whether or not charged.
Category 5. Insulation Boards, Panels and Pipe Covers
These goods have to be classified according to their composition and presentation. For example, if the insulation materials are made of polyurethane, polystyrene, polyolefin and phenolic plastics, then they may be classified Chapter 39, for ``Plastics and articles thereof''. The exact description of the products at issue is necessary before a classification can be given. ******---------------------------------------------------------------------------
****** This category may include insulating board for building panels and windows and doors. It also includes rigid appliance insulation for pipes, tanks, trucks, trailers, containers, train cars & ships, refrigerators, freezers, beverage vending machines, bulk beverage dispensers, water coolers and heaters and ice machines.
Heading/Subheading Article Description
3917.21 to 3917.39..................................... Tubes, pipes and hoses of plastics.3920.10 to 3920.99..................................... Plates, sheets, film, foil and strip made of plastics,
non-cellular and not reinforced, laminated, supported
or similarly combined with other materials.3921.11 to 3921.90..................................... Other plates, sheets, film, foil and strip, made of
plastics.
3925.90................................................ Builders' ware made of plastics, not elsewhere
specified or included.3926.90................................................ Articles made of plastics, not elsewhere specified or
included.
Category 6. Pre-Polymers
According to the Explanatory Notes to the Harmonized Commodity Description and Coding System, ``prepolymers are products which are characterized by some repetition of monomer units although they may contain unreacted monomers. Prepolymers are not normally used as such but are intended to be transformed into higher molecular weight polymers by further polymerization. Therefore the term does not cover finished products, such as di-isobutylenes or mixed polyethylene glycols with very low molecular weight. Examples are epoxides based with epichlorohydrin, and polymeric isocyanates.''
Heading/Subheading Article Description
3901................................................... Pre-polymers based on ethylene (in primary forms).3902................................................... Pre-polymers based on propylene or other olefins (in
primary forms).3903, 3907, 3909....................................... Pre-polymers based on styrene (in primary forms),
epoxide and phenols.
Sec. Appendix E to Subpart A OF Part 82--Article 5 Parties
Parties operating under Article 5 of the Montreal Protocol as of March 26, 2014 are listed below. An updated list can be located at: http://ozone.unep.org/new_site/en/treaty_ratification_status.php.
Afghanistan, Albania, Algeria, Angola, Antigua & Barbuda, Argentina, Armenia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Benin, Bhutan, Bolivia (Plurinational State of), Bosnia and Herzegovina, Botswana, Brazil, Brunei Darussalam, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo, Congo (Democratic Republic of), Cook Islands, Cost Rica, C[ocirc]te d'Ivoire, Cuba, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Ethiopia, Fiji, Gabon, Gambia, Georgia, Ghana, Grenada, Guatemala, Guinea, Guinea Bissau, Guyana, Haiti, Honduras, India, Indonesia, Iran (Islamic Republic of), Iraq, Jamaica, Jordan, Kenya, Kiribati, Korea (Democratic People's Republic of), Korea (Republic of), Kuwait, Kyrgyzstan, Lao (People's Democratic Republic), Lebanon, Lesotho, Liberia, Libya, Madagascar, Malawi, Malaysia, Maldives, Mali, Marshall Islands Mauritania, Mauritius, Mexico, Micronesia (Federal States of), Moldova (Republic of), Mongolia, Montenegro, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Nicaragua, Niger, Nigeria, Niue, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Qatar, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent & the Grenadines, Samoa, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Solomon Islands, Somalia, South Africa, South Sudan*, Sri Lanka, Sudan, Suriname, Swaziland, Syrian Arab Republic, Tanzania (United Republic of), Thailand, The Former Yugoslav Republic of Macedonia, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, United Arab Emirates, Uruguay, Vanuatu, Venezuela (Bolivarian Republic of), Viet Nam, Yemen, Zambia, Zimbabwe.* temporarily categorized as Article 5 pending submission of ODS consumption data [79 FR 16687, Mar. 26, 2014] Appendix F to Subpart A of Part 82--Listing of Ozone-Depleting Chemicals ----------------------------------------------------------------------------------------------------------------
Controlled substance ODP AT L CLP BLP----------------------------------------------------------------------------------------------------------------A. Class I:1. Group I:
CFCl3-Trichlorofluoromethane (CFC-11)....... 1.0 60.0 1.0 0.00
CF2 Cl2-Dichlorodifluoromethane (CFC-12).... 1.0 120.0 1.5 0.00
C2 F3 Cl3-Trichlorotrifluoroethane (CFC-113) 0.8 90.0 1.11 0.00
C2 F4 Cl2-Dichlorotetrafluoroethane (CFC- 1.0 200.00 1.8 0.00
114).......................................
C2 F5 Cl-Monochloropentafluoroethane (CFC- 0.6 400.0 2.0 0.00
115).......................................
All isomers of the above chemicals.......... [Reserved]2. Group II:
CF2 ClBr-Bromochlorodifluoromethane (Halon- 3.0 12 0.06 0.13
1211)......................................
.............. -18 -.08 -.03
CF3 Br-Bromotrifluoromethane (Halon-1301)... 10.0 72 0.00 1.00
.............. -107
C2 F4 Br2-Dibromotetrafluoroethane (Halon- 6.0 23 0.00 0.30
2402)......................................
.............. -28 .............. -.37
All isomers of the above chemicals.......... [Reserved]3. Group III:
CF3 Cl-Chlorotrifluoromethane (CFC-13)...... 1.0 120 0.88 0.00
-250 -1.83
C2 FCl5- (CFC-111).......................... 1.0 60 1.04 0.00
-90 -1.56
C2 F2 Cl4- (CFC-112)........................ 1.0 60 0.90 0.00
-90 -1.35
C3 FCl7- (CFC-211).......................... 1.0 100 1.76 0.00
-500 -8.81
C3 F2 Cl6- (CFC-212)........................ 1.0 100 1.60 0.00
-500 -7.98
C3 F3 Cl5- (CFC-213)........................ 1.0 100 1.41 0.00
-500 -7.06
C3 F4 Cl4- (CFC-214)........................ 1.0 100 1.20 0.00
-500 -6.01
C3 F5 Cl3 -(CFC-215)........................ 1.0 100 0.96 0.00
-500 -4.82
C3 F6 Cl2- (CFC-216)........................ 1.0 100 0.69 0.00
-500 -3.45
C3 F7 Cl- (CFC-217)......................... 1.0 100 0.37 0.00
-500 -1.87
All isomers of the above chemicals.......... [Reserved]4. Group IV:
CCl4 -Carbon Tetrachloride.................. 1.1 50.0 1.0 0.005. Group V:
C2 H3 Cl3-1,1,1 Trichloroethane (Methyl 0.1 6.3 0.11 0.00
chloroform)................................
All isomers of the above chemical except
1,1,2-trichloroethane...................... [Reserved]6. Group VI:
CH3Br-Bromomethane (Methyl Bromide)......... 0.7 .............. [Reserved]7. Group VII:
CHFBr2-..................................... 1.00 .............. [Reserved]
CHF2Br-(HBFC-22B1).......................... 0.74 .............. [Reserved]
CH2FBr...................................... 0.73 .............. [Reserved]
C2HFBr4..................................... 0.3-0.8 .............. [Reserved]
C2HF2Br3.................................... 0.5-1.8 .............. [Reserved]
C2HF3Br2.................................... 0.4-16 .............. [Reserved]
C2HF4Br..................................... 0.7-1.2 .............. [Reserved]
C2H2FBr3.................................... 0.1-1.1 .............. [Reserved]
C2H2F2Br2................................... 0.2-1.5 .............. [Reserved]
C2H2F3Br.................................... 0.7-1.6 .............. [Reserved]
C2H3FBr2.................................... 0.1-1.7 .............. [Reserved]
C2H3F2Br.................................... 0.2-1.1 .............. [Reserved]
C2H4FBr..................................... 0.07-0.1 .............. [Reserved]
C3HFBr6..................................... 0.3-1.5 .............. [Reserved]
C3HF2Br5.................................... 0.2-1.9 .............. [Reserved]
C3HF3Br4.................................... 0.3-1.8 .............. [Reserved]
C3HF4Br3.................................... 0.5-2.2 .............. [Reserved]
C3HF5Br2.................................... 0.9-2.0 .............. [Reserved]
C3HF6Br..................................... 0.7-3.3 .............. [Reserved]
C3H2FBr5.................................... 0.1-1.9 .............. [Reserved]
C3H2F2Br4................................... 0.2-2.1 .............. [Reserved]
C3H2F3Br3................................... 0.2-5.6 .............. [Reserved]
C3H2F4Br2................................... 0.3-7.5 .............. [Reserved]
C3H2F5Br.................................... 0.9-1.4 .............. [Reserved]
C3H3FBR4.................................... 0.08-1.9 .............. [Reserved]
C3H3F2Br3................................... 0.1-3.1 .............. [Reserved]
C3H3F3Br2................................... 0.1-2.5 .............. [Reserved]
C3H3F4Br.................................... 0.3-4.4 .............. [Reserved]
C3H4FBr3.................................... 0.03-0.3 .............. [Reserved]
C3H4F2Br2................................... 0.1-1.0 .............. [Reserved]
C3H4F3Br.................................... 0.07-0.8 .............. [Reserved]
C3H5FBr2.................................... 0.04-0.4 .............. [Reserved]
C3H5F2Br.................................... 0.07-0.8 .............. [Reserved]
C3H6FB...................................... 0.02-0.7 .............. [Reserved]8. Group VIII:
CH2BrCl (Chlorobromomethane)................ 0.12 .............. [Reserved]B. Class II:
CHFCl2-Dichlorofluoromethane (HCFC-21)...... [Reserved] 2.1 0.03 0.00
CHF2 Cl-Chlorodifluoromethane (HCFC-22)..... 0.05 15.3 0.14 0.00
CH2 FCl-Chlorofluoromethane (HCFC-31)....... [Reserved] 1.44 0.02 0.00
C2 HFCl4- (HCFC-121)........................ [Reserved] 0.6 0.01 0.00
C2 HF2 Cl3- (HCFC-122)...................... [Reserved] 1.4 0.02 0.00
C2 HF3 Cl2- (HCFC-123)...................... 0.02 1.6 0.016 0.00
C2 HF4 Cl- (HCFC-124)....................... 0.02 6.6 0.04 0.00
C2 H2 FCl3- (HCFC-131)...................... [Reserved] 4.0 0.06 0.00
C2 H2 F2 Cl2- (HCFC-132b)................... [Reserved] 4.2 0.05 0.00
C2 H2 F3 Cl- (HCFC-133a).................... [Reserved] 4.8 0.03 0.00
C2 H3 FCl2- (HCFC-141b)..................... 0.12 7.8 0.10 0.00
C2 H3 F2 Cl- (HCFC-142b).................... 0.06 19.1 0.14 0.00
C3 HFCl6- (HCFC-221)........................ [Reserved] .............. .............. 0.00
C3 HF2 Cl5- (HCFC-222)...................... [Reserved] .............. .............. 0.00
C3 HF3 Cl4- (HCFC-223)...................... [Reserved] .............. .............. 0.00
C3 HF4 Cl3- (HCFC-224)...................... [Reserved] .............. .............. 0.00
C3 HF5 Cl2- (HCFC-225ca).................... [Reserved] 1.5 0.01 0.00
.............. -1.7
(HCFC-225cb)............................ [Reserved] 5.1 0.04 0.00
C3 HF6 Cl- (HCFC-226)....................... [Reserved] .............. .............. 0.00
C3 H2 FCl5- (HCFC-231)...................... [Reserved] .............. .............. 0.00
C3 H2 F24- (HCFC-232)....................... [Reserved] .............. .............. 0.00
C3 H2 F3 Cl3- (HCFC-233).................... [Reserved] .............. .............. 0.00
C3 H2 F4 Cl2- (HCFC-234).................... [Reserved] .............. .............. 0.00
C3 H2 F5 Cl- (HCFC-235)..................... [Reserved] .............. .............. 0.00
C3 H3 FCl4- (HCFC-241)...................... [Reserved] .............. .............. 0.00
C3 H3 F2 Cl3- (HCFC-242).................... [Reserved] .............. .............. 0.00
C3 H3 F3 Cl2- (HCFC-243).................... [Reserved] .............. .............. 0.00
C3 H3 F4 Cl- (HCFC-244)..................... [Reserved] .............. .............. 0.00
C3 H4 FCl3- (HCFC-251)...................... [Reserved] .............. .............. 0.00
C3 H4 F2 Cl2- (HCFC-252).................... [Reserved] .............. .............. 0.00
C3 H4 F3 Cl- (HCFC-253)..................... [Reserved] .............. .............. 0.00
C3 H5 FCl2- (HCFC-261)...................... [Reserved] .............. .............. 0.00
C2 H5 F2 Cl- (HCFC-262)..................... [Reserved] .............. .............. 0.00
C3 H6 FCl- (HCFC-271)....................... [Reserved] .............. .............. 0.00
All isomers of the above chemicals.......... [Reserved]---------------------------------------------------------------------------------------------------------------- [60 FR 24986, May 10, 1995, as amended at 68 FR 42894, July 18, 2003]
Sec. Appendix G to Subpart A of Part 82--UNEP Recommendations for Conditions Applied to Exemption for Essential Laboratory and Analytical
Uses
1. Essential laboratory and analytical uses are identified at this time to include equipment calibration; use as extraction solvents, diluents, or carriers for chemical analysis; biochemical research; inert solvents for chemical reactions, as a carrier or laboratory chemical and other critical analytical and laboratory purposes. Pursuant to Decision XI/15 of the Parties to the Montreal Protocol, effective January 1, 2002 the following uses of class I controlled substances are not considered essential under the global laboratory exemption:
a. Testing of oil and grease and total petroleum hydrocarbons in water;
b. Testing of tar in road-paving materials; and
c. Forensic finger printing.
Production for essential laboratory and analytical purposes is authorized provided that these laboratory and analytical chemicals shall contain only controlled substances manufactured to the following purities: CTC (reagent grade)--99.51,1,1,-trichloroethane--99.5CFC-11--99.5CFC-13--99.5CFC-12--99.5CFC-113--99.5CFC-114--99.5Other w/ Boiling P20 degrees C--99.5Other w/ Boiling P<20 degrees C--99.0
d. Testing of organic matter in coal.
2. These pure, controlled substances can be subsequently mixed by manufacturers, agents or distributors with other chemicals controlled or not controlled by the Montreal Protocol as is customary for laboratory and analytical uses.
3. These high purity substances and mixtures containing controlled substances shall be supplied only in re-closable containers or high pressure cylinders smaller than three litres or in 10 millilitre or smaller glass ampoules, marked clearly as substances that deplete the ozone layer, restricted to laboratory use and analytical purposes and specifying that used or surplus substances should be collected and recycled, if practical. The material should be destroyed if recycling is not practical.
4. Parties shall annually report for each controlled substance produced: the purity; the quantity; the application, specific test standard, or procedure requiring its uses; and the status of efforts to eliminate its use in each application. Parties shall also submit copies of published instructions, standards, specifications, and regulations requiring the use of the controlled substance.
5. Pursuant to Decision XVIII/15 of the Parties to the Montreal Protocol, methyl bromide is exempted for the following approved essential laboratory and analytical purposes listed in following items (a) through (d). Use of methyl bromide for field trials is not an approved use under the global laboratory and analytical use exemption. The provisions of Appendix G, paragraphs (1), (2), (3), and (4), regarding purity, mixing, container, and reporting requirements for other exempt ODSs, also apply to the use of methyl bromide under this exemption.
a. Methyl bromide is exempted as an approved essential laboratory and analytical use as a reference or standard to calibrate equipment which uses methyl bromide, to monitor methyl bromide emission levels, or to determine methyl bromide residue levels in goods, plants and commodities;
b. Methyl bromide is exempted as an approved essential laboratory and analytical when used in laboratory toxicological studies;
c. Methyl bromide is exempted as an approved essential laboratory and analytical use to compare the efficacy of methyl bromide and its alternatives inside a laboratory; and
d. Methyl bromide is exempted as an approved essential laboratory and analytical use as a laboratory agent which is destroyed in a chemical reaction in the manner of feedstock. [60 FR 24986, May 10, 1995, as amended at 67 FR 6362, Feb. 11, 2002; 72 FR 73269, Dec. 27, 2007]
Appendix H to Subpart A of Part 82--Clean Air Act Amendments of 1990
Phaseout Schedule for Production of Ozone-Depleting Substances ------------------------------------------------------------------------
Other
Carbon Methyl class
Date tetrachloride chloroform substances
(percent) (percent) (percent)------------------------------------------------------------------------1994............................. 70 85 651995............................. 15 70 501996............................. 15 50 401997............................. 15 50 151998............................. 15 50 151999............................. 15 50 152000............................. ............. 202001............................. ............. 20------------------------------------------------------------------------ Sec. Appendix I to Subpart A of Part 82--Global Warming Potentials (Mass
Basis), Referenced to the Absolute GWP for the Adopted Carbon Cycle
Model CO2 Decay Response and Future CO2 Atmospheric Concentrations Held Constant at Current Levels. (Only Direct
Effects Are Considered.) ----------------------------------------------------------------------------------------------------------------
Global warming potential (time
horizon)
Species (chemical) Chemical formula --------------------------------------
20 years 100 years 500 years----------------------------------------------------------------------------------------------------------------CFC-11................................. CFCl3 5000 4000 1400CFC-12................................. CF2 Cl2 7900 8500 4200CFC-13................................. CClF3 8100 11700 13600CFC-113................................ C2 F3 Cl3 5000 5000 2300CFC-114................................ C2 F4 Cl2 6900 9300 8300CFC-115................................ C2 F5 Cl 6200 9300 13000H-1301................................. CF3 Br 6200 5600 2200Carbon Tet............................. CCl4 2000 1400 500Methyl Chl............................. CH3 CCl3 360 110 35HCFC-22................................ CF2 HCl 4300 1700 520HCFC-141b.............................. C2 FH3 Cl2 1800 630 200
HCFC-142b.............................. C2 F2 H3 Cl 4200 2000 630HCFC-123............................... C2 F3 HCl2 300 93 29HCFC-124............................... C2 F4 HCl 1500 480 150HCFC-225ca............................. C3 F5 HCl2 550 170 52HCFC-225cb............................. C3 F5 HCl2 1700 530 170----------------------------------------------------------------------------------------------------------------AUnited Nations Environment Programme (UNEP), February 1995, Scientific Assessment of Ozone Depletion: 1994,
Chapter 13, ``Ozone Depleting Potentials, Global Warming Potentials and Future Chlorine/Bromine Loading,'' and
do not reflect review of scientific documents published after that date. [61 FR 1285, Jan. 19, 1996]
Sec. Appendix J to Subpart A of Part 82--Parties to the Montreal
Protocol Classied Under Article 5(1) That Have Banned the Import of Controlled Products That Rely on Class I Controlled Substances for Their
Continuing Functioning [Reserved]
Sec. Appendix K To Subpart A Of Part 82--Commodity Codes From the Harmonized Tariff Schedule for Controlled Substances and Used Controlled
Substances ------------------------------------------------------------------------
Commodity code
Description of commodity or chemical from harmonized
tariff schedule------------------------------------------------------------------------Class II:
HCFC-22 (Chlorodifluoromethane)................. 2903.71.0000
HCFC-123 (Dichlorotrifluoroethane).............. 2903.79.9020
HCFC-124 (Monochlorotetrafluoroethane).......... 2903.79.9020
HCFC-141b (Dichlorofluoroethane)................ 2903.73.0000
HCFC-142b (Chlorodifluoroethane)................ 2903.74.0000
HCFC-225ca, HCFC-225cb 2903.75.0000
(Dichloropentafluoropropanes)..................
HCFC-21, HCFC-31, HCFC-133, and other HCFCs..... 2903.79.9070
HCFC Mixtures (R-401A, R-402A, etc.)............ 3824.74.0000Class I:
CFC-11 (Trichlorofluoromethane)................. 2903.77.0010
CFC-12 (Dichlorodifluoromethane)................ 2903.77.0050
CFC-113 (Trichlorotrifluoroethane).............. 2903.77.0020
CFC-114 (Dichlorotetrafluoroethane)............. 2903.77.0030
CFC-115 (Monochloropentafluoroethane)........... 2903.77.0040
CFC-13, CFC-111, CFC-112, CFC-211, CFC-212, CFC- 2903.77.0080
213, CFC-214, CFC-215, CFC-216, CFC-217, and
other CFCs.....................................
CFC Mixtures (R-500, R-502, etc.)............... 3824.71.0100
Carbon Tetrachloride............................ 2903.14.0000
Halon 1301 (Bromotrifluoromethane).............. 2903.76.0010
Halon, other.................................... 2903.76.0050
Methyl Bromide.................................. 2903.39.1520
Methyl Chloroform............................... 2903.19.6010------------------------------------------------------------------------ [79 FR 16687, Mar. 26, 2014] Appendix L to Subpart A of Part 82--Approved Critical Uses and Limiting Critical Conditions for Those Uses for the 2014 and 2015 Control Periods ------------------------------------------------------------------------
Column A Column B Column C------------------------------------------------------------------------Approved Critical Uses...... Approved Critical Limiting Critical
User, Location of Conditions that
Use, and Control exist, or that the
Period. approved critical
user reasonably
expects could arise
without methyl
bromide fumigation.PRE-PLANT USES:
Strawberry Fruit........ California growers. Moderate to severe
Control periods black root rot or
2014 and 2015. crown rot.
Moderate to severe
yellow or purple
nutsedge
infestation.
Moderate to severe
nematode
infestation.
Local township
limits prohibiting
1,3-
dichloropropene.POST-HARVEST USES:
(a) Rice millers in Moderate to severe
the U.S. who are beetle, weevil, or
members of the USA moth infestation.
Rice Millers' Presence of
Association. sensitive
Control period 2014. electronic
equipment subject
to corrosion.
(b) Pet food Moderate to severe
manufacturing beetle, moth, or
facilities in the cockroach
U.S. who are infestation.
members of the Pet Presence of
Food Institute. sensitive
Control period 2014. electronic
equipment subject
to corrosion.
(c) Members of the Moderate to severe
North American beetle infestation.
Millers' Presence of
Association in the sensitive
U.S. Control period electronic
2014. equipment subject
to corrosion.
Commodities............. California entities Rapid fumigation
storing walnuts, required to meet a
dried plums, figs, critical market
raisins, and dates window, such as
(in Riverside during the holiday
county only) in season.
California. Control
period 2014.
Dry Cured Pork Products. Members of the Red legged ham
National Country beetle infestation.
Ham Association and Cheese/ham skipper
the American infestation.
Association of Meat Dermestid beetle
Processors, Nahunta infestation.
Pork Center (North Ham mite
Carolina), and infestation.
Gwaltney of
Smithfield Inc.
Control periods
2014 and 2015.------------------------------------------------------------------------ [79 FR 44312, July 31, 2014]