(a) Incorporation by reference. The documents in paragraph (b) of this section have been incorporated by reference. The incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be inspected at U.S. EPA Air and Radiation Docket, room M-1500, 401 M St., SW., Washington D.C. 20460, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(b) The following paragraphs and tables set forth the material that has been incorporated by reference in this part.
(1) ASTM material. The following table sets forth material from the American Society for Testing and Materials which has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than Sec. 90.7, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from American Society for Testing and Materials, 1916 Race St., Philadelphia, PA 19103. ------------------------------------------------------------------------
Document number and name 40 CFR part 90 reference------------------------------------------------------------------------ASTM D86-93:
Standard Test Method for Distillation Appendix A to subpart D,
of Petroleum Products. Table 3.ASTM D1319-89:
Standard Test Method for Hydrocarbon Appendix A to subpart D,
Types in Liquid Petroleum Products Table 3.
by Fluorescent Indicator Adsorption.ASTM D2622-92:
Standard Test Method for Sulfur in Appendix A to subpart D,
Petroleum Products by X-ray Table 3.
Spectrometry.ASTM D2699-92:
Standard Test Method for Knock Appendix A to subpart D,
Characteristics of Motor Fuels by Table 3.
the Research Method.ASTM D2700-92:
Standard Test Method for Knock Appendix A to subpart D,
Characteristics of Motor and Table 3.
Aviation Fuels by the Motor Method.ASTM D3231-89:
Standard Test Method for Phosphorus Appendix A to subpart D,
in Gasoline. Table 3.ASTM D3606-92:
Standard Test Method for Appendix A to subpart D,
Determination of Benzene and Toluene Table 3.
in Finished Motor and Aviation
Gasoline by Gas Chromatography.ASTM D5191-93a:
Standard Test Method for Vapor Appendix A to subpart D,
Pressure of Petroleum Products (Mini Table 3.
Method).ASTM E29-93a:
Standard Practice for Using 90.116; 90.509.
Significant Digits in Test Data to
Determine Conformance with
Specifications.------------------------------------------------------------------------
(2) SAE material. The following table sets forth material from the Society of Automotive Engineers which has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than Sec. 90.7, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from Society of Automotive Engineers International, 400 Commonwealth Dr., Warrendale, PA 15096-0001. ------------------------------------------------------------------------
Document number and name 40 CFR part 90 reference------------------------------------------------------------------------SAE J1930 September 1991, Electrical/ 90.114
Electronic Systems Diagnostic Terms,
Definitions, Abbreviations and Acronyms.SAE Paper 770141, Optimization of a Flame 90.316
Ionization Detector for Determination of
Hydrocarbon in Diluted Automotive
Exhausts, Glenn D. Reschke, 1977.------------------------------------------------------------------------