(a) A copy of the manufacturer's data report required by Section VIII of the ASME Code (IBR, see Sec. 171.7 of this subchapter) under which the tank is fabricated must be furnished to the owner for each new tank.
Place__________________________________________________________________
Date___________________________________________________________________
Portable tankManufactured for -------------- CompanyLocation________________________________________________________________Manufactured by -------------- CompanyLocation________________________________________________________________Consigned to ------------------ CompanyLocation________________________________________________________________Size ------ feet outside diameter by ------ long.Marks on tank as prescribed by Sec. 178.255-14 of this specification are as follows:Manufacturer's name_____________________________________________________Serial number___________________________________________________________Owner's serial number___________________________________________________DOT specification_______________________________________________________ASME Code Symbol (par U-201)____________________________________________Date of manufacture_____________________________________________________Nominal capacity -------------- gallons.
It is hereby certified that this tank is in complete compliance with the requirements of DOT specification No. 60.
(Signed)_______________________________________________________________
Manufacturer or owner
(b) [Reserved] [29 FR 18972, Dec. 29, 1964. Redesignated at 32 FR 5606, Apr. 5, 1967, and amended by Amdt. 178-83, 50 FR 11066, Mar. 19, 1985; 68 FR 75750, Dec. 31, 2003]