(a) The ES-2re Side Impact Crash Test Dummy, 50th Percentile Adult Male, is defined by:
(1) The drawings and specifications contained in the ``Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES-2re, Alpha Version), September 2009,'' (incorporated by reference, see Sec. 572.180), which includes the technical drawings and specifications described in Drawing 175-0000, the titles of which are listed in Table A;
Table A------------------------------------------------------------------------
Component assembly Drawing No.------------------------------------------------------------------------Head Assembly............................. 175-1000Neck Assembly Test/Cert................... 175-2000Neck Bracket Including Lifting Eyebolt.... 175-2500Shoulder Assembly......................... 175-3000Arm Assembly-Left......................... 175-3500Arm Assembly-Right........................ 175-3800Thorax Assembly with Rib Extensions....... 175-4000Abdominal Assembly........................ 175-5000Lumbar Spine Assembly..................... 175-5500Pelvis Assembly........................... 175-6000Leg Assembly, Left........................ 175-7000-1Leg Assembly, Right....................... 175-7000-2Neoprene Body Suit........................ 175-8000------------------------------------------------------------------------
(2) ``Parts/Drawings List, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES2re), September 2009,'' containing 9 pages, incorporated by reference, see Sec. 572.180,
(3) A listing of available transducers-crash test sensors for the ES-2re Crash Test Dummy is shown in drawing 175-0000 sheet 4 of 6, dated February 2008, incorporated by reference, see Sec. 572.180,
(4) Procedures for Assembly, Disassembly and Inspection (PADI) of the ES-2re Side Impact Crash Test Dummy, February 2008, incorporated by reference, see Sec. 572.180,
(5) Sign convention for signal outputs reference document SAE J1733 Information Report, titled ``Sign Convention for Vehicle Crash Testing'' dated December 1994, incorporated by reference, see Sec. 572.180.
(b) Exterior dimensions of ES-2re test dummy are shown in drawing 175-0000 sheet 3 of 6, dated February 2008, incorporated by reference, see Sec. 572.180.
(c) Weights of body segments (head, neck, upper and lower torso, arms and upper and lower segments) and the center of gravity location of the head are shown in drawing 175-0000 sheet 2 of 6, dated February 2008, incorporated by reference, see Sec. 572.180.
(d) Adjacent segments are joined in a manner such that, except for contacts existing under static conditions, there is no additional contact between metallic elements of adjacent body segments throughout the range of motion.
(e) The structural properties of the dummy are such that the dummy conforms to this Subpart in every respect before use in any test similar to those in Standard No. 214, Side Impact Protection and Standard No. 201, Occupant Protection in Interior Impact. [71 FR 75331, Dec. 14, 2006, as amended at 73 FR 33921, June 16, 2008; 76 FR 31866, June 2, 2011]