(a) Establishment of the Board. There is hereby established a Paper and Paper-Based Packaging Board to administer the terms and provisions of this Order. The Board shall be composed of manufacturers and importers of paper and paper-based packaging that manufacture or import 100,000 short tons or more of paper and paper-based packaging during a marketing year. Seats on the Board shall be apportioned as set forth in paragraph (b) of this section based on the geographical distribution of the quantity of paper and paper-based packaging manufactured in the United States and the quantity of paper and paper-based packaging imported to the United States.
(b) The Board shall be composed of 12 members and shall be established as follows:
(1) Manufacturers. Eleven members shall be manufacturers. Of the 11 manufacturers, 10 shall be from the following four regions:
(i) Six members shall be from the South, which consists of the states of Alabama, Arkansas, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, West Virginia, and all other parts of the United States not listed in paragraphs (b)(1)(ii), (b)(1)(iii), and (b)(1)(iv) of this section;
(ii) One member shall be from the Northeast, which consists of the states of Connecticut, Maine, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island and Vermont;
(iii) Two members shall be from the Midwest, which consists of the states of Colorado, Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, North Dakota, Ohio, South Dakota, Wisconsin and Wyoming; and
(iv) One member shall be from the West, which consists of the states of Alaska, Arizona, California, Hawaii, Idaho, Montana, New Mexico, Nevada, Oregon, Utah, and Washington.
(v) One manufacturer member at large may be from any region and shall manufacture at least 100,000 short tons but no more than 250,000 short tons of paper and paper-based packaging annually. If there are no eligible nominees, this seat shall be allocated to the largest producing region specified in paragraphs (b)(1)(i) through (b)(1)(iv) of this section.
(2) Importers. One member shall be an importer.
(c) At least once in every five-year period, but not more frequently than once in every three-year period, the Board will review the geographical distribution of the quantity of paper and paper-based packaging manufactured within the United States and the quantity of paper and paper-based packaging imported to the United States. The review will be conducted using the Board's annual assessment receipts and, if available, other reliable reports from the industry. If warranted, the Board will recommend to the Secretary that the membership or size of the Board be adjusted to reflect changes in geographical distribution of the quantity of paper and paper-based packaging manufactured in the United States and the quantity of paper and paper-based packaging imported to the United States. Any changes in Board composition shall be implemented by the Secretary through rulemaking.